参数资料
型号: SAK-C167CR-4R33M
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP144
封装: PLASTIC, MQFP-144
文件页数: 24/89页
文件大小: 1477K
代理商: SAK-C167CR-4R33M
C167CR
C167SR
Functional Description
Data Sheet
28
V3.3, 2005-02
3.2
External Bus Controller
All of the external memory accesses are performed by a particular on-chip External Bus
Controller (EBC). It can be programmed either to Single Chip Mode when no external
memory is required, or to one of four different external memory access modes, which are
as follows:
16-/18-/20-/24-bit Addresses, 16-bit Data, Demultiplexed
16-/18-/20-/24-bit Addresses, 16-bit Data, Multiplexed
16-/18-/20-/24-bit Addresses, 8-bit Data, Multiplexed
16-/18-/20-/24-bit Addresses, 8-bit Data, Demultiplexed
In the demultiplexed bus modes, addresses are output on PORT1 and data is
input/output on PORT0 or P0L, respectively. In the multiplexed bus modes both
addresses and data use PORT0 for input/output.
Important timing characteristics of the external bus interface (Memory Cycle Time,
Memory Tri-State Time, Length of ALE and Read Write Delay) have been made
programmable to allow the user the adaption of a wide range of different types of
memories and external peripherals.
In addition, up to 4 independent address windows may be defined (via register pairs
ADDRSELx / BUSCONx) which control the access to different resources with different
bus characteristics. These address windows are arranged hierarchically where
BUSCON4 overrides BUSCON3 and BUSCON2 overrides BUSCON1. All accesses to
locations not covered by these 4 address windows are controlled by BUSCON0.
Up to 5 external CS signals (4 windows plus default) can be generated in order to save
external glue logic. The C167CR offers the possibility to switch the CS outputs to an
unlatched mode. In this mode the internal filter logic is switched off and the CS signals
are directly generated from the address. The unlatched CS mode is enabled by setting
CSCFG (SYSCON.6).
Access to very slow memories or memories with varying access times is supported via
a particular ‘Ready’ function.
A HOLD/HLDA protocol is available for bus arbitration and allows to share external
resources with other bus masters. The bus arbitration is enabled by setting bit HLDEN
in register PSW. After setting HLDEN once, pins P6.7 … P6.5 (BREQ, HLDA, HOLD)
are automatically controlled by the EBC. In Master Mode (default after reset) the HLDA
pin is an output. By setting bit DP6.7 to ‘1’ the Slave Mode is selected where pin HLDA
is switched to input. This allows to directly connect the slave controller to another master
controller without glue logic.
For applications which require less than 16 Mbytes of external memory space, this
address space can be restricted to 1 Mbyte, 256 Kbyte, or to 64 Kbyte. In this case Port 4
outputs four, two, or no address lines at all. It outputs all 8 address lines, if an address
space of 16 Mbytes is used.
相关PDF资料
PDF描述
SAB-C167CR-L33M 16-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP144
SAF-C504-2R24M 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP44
SAF-C513AO-2EM 8-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP44
SAF-C868A-1SRBA 8-BIT, 40 MHz, MICROCONTROLLER, PDSO38
SAK-C868P-1SRBA 8-BIT, 40 MHz, MICROCONTROLLER, PDSO38
相关代理商/技术参数
参数描述
SAK-C167CR-4RM 制造商:Rochester Electronics LLC 功能描述:- Bulk
SAK-C167CR-4RM B03957 制造商:Infineon Technologies AG 功能描述:
SAK-C167CR-L33M 制造商:Infineon Technologies AG 功能描述:16BIT MCU 2K RAM ROM/ROMLESS 167 制造商:Infineon Technologies AG 功能描述:16BIT MCU, 2K RAM, ROM/ROMLESS, 167 制造商:Infineon Technologies AG 功能描述:16BIT MCU, 2K RAM, ROM/ROMLESS, 167; Controller Family/Series:C167CR; Core Size:16bit; No. of I/O's:111; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; Digital IC Case Style:MQFP; No. of Pins:144; RAM Memory Size:2KB; CPU ;RoHS Compliant: Yes
SAKC167CRL33M HA+ 制造商:Infineon Technologies AG 功能描述:
SAK-C167CR-L33M HA+ 功能描述:16位微控制器 - MCU 16-Bit Single-Chip 5V 33MHz ROM less RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT