参数资料
型号: SAK-C167CR-4R33M
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP144
封装: PLASTIC, MQFP-144
文件页数: 32/89页
文件大小: 1477K
代理商: SAK-C167CR-4R33M
C167CR
C167SR
Functional Description
Data Sheet
36
V3.3, 2005-02
3.5
Capture/Compare (CAPCOM) Units
The CAPCOM units support generation and control of timing sequences on up to
32 channels with a maximum resolution of 16 TCL. The CAPCOM units are typically
used to handle high speed I/O tasks such as pulse and waveform generation, pulse
width modulation (PMW), Digital to Analog (D/A) conversion, software timing, or time
recording relative to external events.
Four 16-bit timers (T0/T1, T7/T8) with reload registers provide two independent time
bases for the capture/compare register array.
The input clock for the timers is programmable to several prescaled values of the internal
system clock, or may be derived from an overflow/underflow of timer T6 in module GPT2.
This provides a wide range of variation for the timer period and resolution and allows
precise adjustments to the application specific requirements. In addition, external count
inputs for CAPCOM timers T0 and T7 allow event scheduling for the capture/compare
registers relative to external events.
Both of the two capture/compare register arrays contain 16 dual purpose
capture/compare registers, each of which may be individually allocated to either
CAPCOM timer T0 or T1 (T7 or T8, respectively), and programmed for capture or
compare function. Each register has one port pin associated with it which serves as an
input pin for triggering the capture function, or as an output pin (except for
CC24 … CC27) to indicate the occurrence of a compare event.
When a capture/compare register has been selected for capture mode, the current
contents of the allocated timer will be latched (‘captured’) into the capture/compare
register in response to an external event at the port pin which is associated with this
register. In addition, a specific interrupt request for this capture/compare register is
generated. Either a positive, a negative, or both a positive and a negative external signal
transition at the pin can be selected as the triggering event. The contents of all registers
which have been selected for one of the five compare modes are continuously compared
with the contents of the allocated timers. When a match occurs between the timer value
and the value in a capture/compare register, specific actions will be taken based on the
selected compare mode.
相关PDF资料
PDF描述
SAB-C167CR-L33M 16-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP144
SAF-C504-2R24M 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP44
SAF-C513AO-2EM 8-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP44
SAF-C868A-1SRBA 8-BIT, 40 MHz, MICROCONTROLLER, PDSO38
SAK-C868P-1SRBA 8-BIT, 40 MHz, MICROCONTROLLER, PDSO38
相关代理商/技术参数
参数描述
SAK-C167CR-4RM 制造商:Rochester Electronics LLC 功能描述:- Bulk
SAK-C167CR-4RM B03957 制造商:Infineon Technologies AG 功能描述:
SAK-C167CR-L33M 制造商:Infineon Technologies AG 功能描述:16BIT MCU 2K RAM ROM/ROMLESS 167 制造商:Infineon Technologies AG 功能描述:16BIT MCU, 2K RAM, ROM/ROMLESS, 167 制造商:Infineon Technologies AG 功能描述:16BIT MCU, 2K RAM, ROM/ROMLESS, 167; Controller Family/Series:C167CR; Core Size:16bit; No. of I/O's:111; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; Digital IC Case Style:MQFP; No. of Pins:144; RAM Memory Size:2KB; CPU ;RoHS Compliant: Yes
SAKC167CRL33M HA+ 制造商:Infineon Technologies AG 功能描述:
SAK-C167CR-L33M HA+ 功能描述:16位微控制器 - MCU 16-Bit Single-Chip 5V 33MHz ROM less RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT