参数资料
型号: SAK-C167CR-4R33M
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP144
封装: PLASTIC, MQFP-144
文件页数: 42/89页
文件大小: 1477K
代理商: SAK-C167CR-4R33M
C167CR
C167SR
Functional Description
Data Sheet
45
V3.3, 2005-02
3.12
Parallel Ports
The C167CR provides up to 111 I/O lines which are organized into eight input/output
ports and one input port. All port lines are bit-addressable, and all input/output lines are
individually (bit-wise) programmable as inputs or outputs via direction registers. The I/O
ports are true bidirectional ports which are switched to high impedance state when
configured as inputs. The output drivers of five I/O ports can be configured (pin by pin)
for push/pull operation or open-drain operation via control registers. During the internal
reset, all port pins are configured as inputs.
The input threshold of Port 2, Port 3, Port 6, Port 7, and Port 8 is selectable (TTL or
CMOS like), where the special CMOS like input threshold reduces noise sensitivity due
to the input hysteresis. The input threshold may be selected individually for each byte of
the respective ports.
All port lines have programmable alternate input or output functions associated with
them. All port lines that are not used for these alternate functions may be used as general
purpose IO lines.
PORT0 and PORT1 may be used as address and data lines when accessing external
memory, while Port 4 outputs the additional segment address bits A23/19/17 … A16 in
systems where segmentation is enabled to access more than 64 Kbytes of memory.
Port 2, Port 8 and Port 7 (and parts of PORT1) are associated with the capture inputs or
compare outputs of the CAPCOM units and/or with the outputs of the PWM module.
Port 6 provides optional bus arbitration signals (BREQ, HLDA, HOLD) and chip select
signals.
Port 3 includes alternate functions of timers, serial interfaces, the optional bus control
signal BHE/WRH, and the system clock output (CLKOUT).
Port 5 is used for the analog input channels to the A/D converter or timer control signals.
The edge characteristics (transition time) of the C167CR’s port drivers can be selected
via the Port Driver Control Register (PDCR). Two bits select fast edges (‘0’) or reduced
edges (‘1’) for bus interface pins and non-bus pins separately.
PDCR.0 = BIPEC controls PORT0, PORT1, Port 4, RD, WR, ALE, CLKOUT, BHE/WRH.
PDCR.4 = NBPEC controls Port 3, Port 8, RSTOUT, RSTIN (bidir. reset mode).
相关PDF资料
PDF描述
SAB-C167CR-L33M 16-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP144
SAF-C504-2R24M 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP44
SAF-C513AO-2EM 8-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP44
SAF-C868A-1SRBA 8-BIT, 40 MHz, MICROCONTROLLER, PDSO38
SAK-C868P-1SRBA 8-BIT, 40 MHz, MICROCONTROLLER, PDSO38
相关代理商/技术参数
参数描述
SAK-C167CR-4RM 制造商:Rochester Electronics LLC 功能描述:- Bulk
SAK-C167CR-4RM B03957 制造商:Infineon Technologies AG 功能描述:
SAK-C167CR-L33M 制造商:Infineon Technologies AG 功能描述:16BIT MCU 2K RAM ROM/ROMLESS 167 制造商:Infineon Technologies AG 功能描述:16BIT MCU, 2K RAM, ROM/ROMLESS, 167 制造商:Infineon Technologies AG 功能描述:16BIT MCU, 2K RAM, ROM/ROMLESS, 167; Controller Family/Series:C167CR; Core Size:16bit; No. of I/O's:111; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; Digital IC Case Style:MQFP; No. of Pins:144; RAM Memory Size:2KB; CPU ;RoHS Compliant: Yes
SAKC167CRL33M HA+ 制造商:Infineon Technologies AG 功能描述:
SAK-C167CR-L33M HA+ 功能描述:16位微控制器 - MCU 16-Bit Single-Chip 5V 33MHz ROM less RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT