- 您现在的位置：买卖IC网 > PDF目录98143 > SSTUB32864EC/G (NXP SEMICONDUCTORS) 32864 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PBGA96 PDF资料下载
参数资料
| 型号： | SSTUB32864EC/G |
| 厂商： | NXP SEMICONDUCTORS |
| 元件分类： | 锁存器 |
| 英文描述： | 32864 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PBGA96 |
| 封装： | 13.50 X 5.50 MM, 1.05 MM HEIGHT, LEAD FREE, PLASTIC, SOT-536-1, LFBGA-96 |
| 文件页数： | 10/19页 |
| 文件大小： | 113K |
| 代理商： | SSTUB32864EC/G |
SSTUB32864_2
NXP B.V. 2007. All rights reserved.
Product data sheet
Rev. 02 — 26 March 2007
18 of 19
NXP Semiconductors
SSTUB32864
1.8 V congurable registered buffer for DDR2-800 RDIMM applications
16. Legal information
16.1
Data sheet status
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Denitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
16.2
Denitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
ofce. In case of any inconsistency or conict with the short data sheet, the
full data sheet shall prevail.
16.3
Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a NXP Semiconductors product can reasonably be expected to
result in personal injury, death or severe property or environmental damage.
NXP Semiconductors accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or applications and therefore
such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specied use without further testing or modication.
Limiting values — Stress above one or more limiting values (as dened in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/prole/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
16.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
17. Contact information
For additional information, please visit: http://www.nxp.com
For sales ofce addresses, send an email to: salesaddresses@nxp.com
Document status[1][2]
Product status[3]
Denition
Objective [short] data sheet
Development
This document contains data from the objective specication for product development.
Preliminary [short] data sheet
Qualication
This document contains data from the preliminary specication.
Product [short] data sheet
Production
This document contains the product specication.
相关PDF资料 |
PDF描述 |
|---|---|
| SSTUB32868ET/S | 32868 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PBGA176 |
| SSTUG32865ET/S | SSTU SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PBGA160 |
| SSTUG32868ET/G | 32868 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PBGA176 |
| SSTUP32866EC/S | 32866 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PBGA96 |
| SSTV16857EC | POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PBGA56 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SSTUB32865 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:1.8 V 28-bit 1 : 2 registered buffer with parity for DDR2-800 RDIMM applications |
| SSTUB32865ET/G,518 | 功能描述:寄存器 1.8V 28B REG RoHS:否 制造商:NXP Semiconductors 逻辑类型:CMOS 逻辑系列:HC 电路数量:1 最大时钟频率:36 MHz 传播延迟时间: 高电平输出电流:- 7.8 mA 低电平输出电流:7.8 mA 电源电压-最大:6 V 最大工作温度:+ 125 C 封装 / 箱体:SOT-38 封装:Tube |
| SSTUB32865ET/G-T | 功能描述:寄存器 1.8V 28B REG BUF/PRTY DDR2-800 RoHS:否 制造商:NXP Semiconductors 逻辑类型:CMOS 逻辑系列:HC 电路数量:1 最大时钟频率:36 MHz 传播延迟时间: 高电平输出电流:- 7.8 mA 低电平输出电流:7.8 mA 电源电压-最大:6 V 最大工作温度:+ 125 C 封装 / 箱体:SOT-38 封装:Tube |
| SSTUB32866 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:1.8 V 25-bit 1 : 1 or 14-bit 1 : 2 configurable registered buffer with parity for DDR2-800 RDIMM applications |
| SSTUB32866_10 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:1.8 V 25-bit 1 : 1 or 14-bit 1 : 2 configurable registered buffer with parity for DDR2-800 RDIMM applications |
发布紧急采购，3分钟左右您将得到回复。