参数资料
型号: SSTUB32864EC/G
厂商: NXP SEMICONDUCTORS
元件分类: 锁存器
英文描述: 32864 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PBGA96
封装: 13.50 X 5.50 MM, 1.05 MM HEIGHT, LEAD FREE, PLASTIC, SOT-536-1, LFBGA-96
文件页数: 16/19页
文件大小: 113K
代理商: SSTUB32864EC/G
SSTUB32864_2
NXP B.V. 2007. All rights reserved.
Product data sheet
Rev. 02 — 26 March 2007
6 of 19
NXP Semiconductors
SSTUB32864
1.8 V congurable registered buffer for DDR2-800 RDIMM applications
6.2 Pin description
[1]
Depends on conguration. See Figure 3, Figure 4, and Figure 5 for ball number.
[2]
Congurations:
Data inputs = D2, D3, D5, D6, D8 to D25 when C0 = 0 and C1 = 0.
Data inputs = D2, D3, D5, D6, D8 to D14 when C0 = 0 and C1 = 1.
Data inputs = D1 to D6, D8 to D10, D12, D13 when C0 = 1 and C1 = 1.
[3]
Congurations:
Data outputs = Q2, Q3, Q5, Q6, Q8 to Q25 when C0 = 0 and C1 = 0.
Data outputs = Q2, Q3, Q5, Q6, Q8 to Q14 when C0 = 0 and C1 = 1.
Data outputs = Q1 to Q6, Q8 to Q10, Q12, Q13 when C0 = 1 and C1 = 1.
Table 2.
Pin description
Symbol
Pin
Type
Description
GND
B3, B4, D3, D4, F3, F4,
H3, H4, K3, K4, M3,
M4, P3, P4
ground input
ground
VDD
A4, C3, C4, E3, E4,
G3, G4, J3, J4, L3, L4,
N3, N4, R3, R4, T4
1.8 V nominal
power supply voltage
VREF
A3, T3
0.9 V nominal
input reference voltage
ZOH
J5
input
reserved for future use
ZOL
J6
input
reserved for future use
CK
H1
differential input positive master clock input
CK
J1
differential input negative master clock input
C0, C1
G6, G5
LVCMOS inputs conguration control inputs
RESET
G2
LVCMOS input
Asynchronous reset input (active LOW). Resets registers and
disables VREF data and clock differential-input receivers.
CSR, DCS
J2, H2
SSTL_18 input
Chip select inputs (active LOW). Disables data outputs
switching when both inputs are HIGH.[2]
D1 to D25
SSTL_18 input
Data inputs. Clocked in on the crossing of the rising edge of
CK and the falling edge of CK.
DODT
SSTL_18 input
The outputs of this register will not be suspended by DCS and
CSR control.
DCKE
SSTL_18 input
The outputs of this register will not be suspended by DCS and
CSR control.
Q1 to Q25,
Q1A to Q14A,
Q1B to Q14B
1.8 V CMOS
outputs that are suspended by DCS and CSR control[3]
QCS, QCSA,
QCSB
1.8 V CMOS
data outputs that will not be suspended by DCS and CSR
control
QODT, QODTA,
QODTB
1.8 V CMOS
data outputs that will not be suspended by DCS and CSR
control
QCKE, QCKEA,
QCKEB
1.8 V CMOS
data outputs that will not be suspended by DCS and CSR
control
n.c.
A2, D2, G1
-
Not connected. Ball present but no internal connection to the
die.
DNU
-
Do-not-use. Ball internally connected to the die which should
be left open-circuit.
相关PDF资料
PDF描述
SSTUB32868ET/S 32868 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PBGA176
SSTUG32865ET/S SSTU SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PBGA160
SSTUG32868ET/G 32868 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PBGA176
SSTUP32866EC/S 32866 SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PBGA96
SSTV16857EC POSITIVE EDGE TRIGGERED D FLIP-FLOP, TRUE OUTPUT, PBGA56
相关代理商/技术参数
参数描述
SSTUB32865 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:1.8 V 28-bit 1 : 2 registered buffer with parity for DDR2-800 RDIMM applications
SSTUB32865ET/G,518 功能描述:寄存器 1.8V 28B REG RoHS:否 制造商:NXP Semiconductors 逻辑类型:CMOS 逻辑系列:HC 电路数量:1 最大时钟频率:36 MHz 传播延迟时间: 高电平输出电流:- 7.8 mA 低电平输出电流:7.8 mA 电源电压-最大:6 V 最大工作温度:+ 125 C 封装 / 箱体:SOT-38 封装:Tube
SSTUB32865ET/G-T 功能描述:寄存器 1.8V 28B REG BUF/PRTY DDR2-800 RoHS:否 制造商:NXP Semiconductors 逻辑类型:CMOS 逻辑系列:HC 电路数量:1 最大时钟频率:36 MHz 传播延迟时间: 高电平输出电流:- 7.8 mA 低电平输出电流:7.8 mA 电源电压-最大:6 V 最大工作温度:+ 125 C 封装 / 箱体:SOT-38 封装:Tube
SSTUB32866 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:1.8 V 25-bit 1 : 1 or 14-bit 1 : 2 configurable registered buffer with parity for DDR2-800 RDIMM applications
SSTUB32866_10 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:1.8 V 25-bit 1 : 1 or 14-bit 1 : 2 configurable registered buffer with parity for DDR2-800 RDIMM applications