参数资料
型号: ST10R272LT6
厂商: STMICROELECTRONICS
元件分类: 微控制器/微处理器
英文描述: 16-BIT, 50 MHz, MICROCONTROLLER, PQFP100
封装: 14 X 14 MM, TQFP-100
文件页数: 10/77页
文件大小: 707K
代理商: ST10R272LT6
18/77
ST10R272L - MULTIPLY-ACCUMULATE UNIT (MAC)
The Parallel Data Move shifts a table of operands in parallel with a computation on those
operands. Its specific use is for signal processing algorithms like filter computation. The
following figure gives an example of Parallel Data Move with CoMACM instruction.
16 x 16 signed/unsigned parallel multiplier
The multiplier executes 16 x 16-bit parallel signed/unsigned fractional and integer multiplies.
The multiplier has two 16-bit input ports, and a 32-bit product output port. The input ports can
accept data from the MA-bus and from the MB-bus. The output is sign-extended and then
feeds a scaler that shifts the multiplier output according to the shift mode bit MP specified in
the co-processor Control Word (MCW). The product can be shifted one bit left to compensate
for the extra sign bit gained in multiplying two 16-bit signed (2’s complement) fractional
numbers if bit MP is set.
40-bit signed arithmetic unit
The arithmetic unit over 32 bits wide to allow intermediate overflow in a series of multiply/
accumulate operations. The extension flag E, contained in the most significant byte of MSW,
is set when the Accumulator has overflowed beyond the 32-bit boundary, that is, when there
are significant (non-sign) bits in the top eight (signed arithmetic) bits of the Accumulator.
The 40-bit arithmetic unit has two 40-bit input ports A and B. The A-input port accepts data
from 4 possible sources: 00,0000,0000h, 00,0000,8000h (round), the sign-extended product,
or the sign-extended data conveyed by the 32-bit bus resulting from the concatenation of MA-
and MB-buses. Product and Concatenation can be shifted left by one according to MP for the
multiplier or to the instruction for the concatenation. The B-input port is fed either by the 40-bit
shifted/not shifted and inverted/not inverted accumulator or by 00,0000,0000h. A-input and B-
Figure 6 Example of parallel data move
CoMACM [IDX0+], [R2+]
X
n+2
n
n-2
n-4
16-bit
IDX0
X
n+2
n
n-2
n-4
IDX0
Parallel Data Move
After Execution
Before Execution
1
相关PDF资料
PDF描述
ST16C452PSIJ68 2 CHANNEL(S), SERIAL COMM CONTROLLER, PQCC68
ST16C452ATIJ68 2 CHANNEL(S), SERIAL COMM CONTROLLER, PQCC68
ST16C654IQ64/TR 4 CHANNEL(S), 1.5M bps, SERIAL COMM CONTROLLER, PQFP64
ST18931CR 16-BIT, 50 MHz, OTHER DSP, CPGA121
ST40RA150XH6 32-BIT, 150 MHz, RISC PROCESSOR, PBGA372
相关代理商/技术参数
参数描述
ST10-S 功能描述:电机驱动器 RoHS:否 制造商:Applied Motion 电机驱动类型:2035 Step 电源电压:12 V to 35 V 功率额定值:70 W 每转步距分辨率:200 to 400 框架大小 (NEMA):
ST10-S (5000-127) 功能描述:电机驱动器 RoHS:否 制造商:Applied Motion 电机驱动类型:2035 Step 电源电压:12 V to 35 V 功率额定值:70 W 每转步距分辨率:200 to 400 框架大小 (NEMA):
ST10S008V4AR1800 功能描述:记忆卡连接器 Micro SD Conn P/P 1.25x13.2x14.85mm RoHS:否 制造商:Yamaichi Electronics 产品:Card Connectors 卡类型:microSD 类型: 节距: 方向: 安装风格:SMD/SMT 端接类型: 排数: 触点数量: 电流额定值:0.5 A 电压额定值:50 V
ST10S008V4B 制造商:JAE 制造商全称:JAE 功能描述:microSDTM Small Memory Card Connector
ST10S008V4BR1800 功能描述:记忆卡连接器 microSD PUSH-PUSH LOW PROFILE 1.25MM H RoHS:否 制造商:Yamaichi Electronics 产品:Card Connectors 卡类型:microSD 类型: 节距: 方向: 安装风格:SMD/SMT 端接类型: 排数: 触点数量: 电流额定值:0.5 A 电压额定值:50 V