
Page 1
2007-10-15
20070701-EN
The information contained herein is subject to change without notice.
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can
malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when
utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations
in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most
recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for
Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equip-
ment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither
intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunctionor failure of
which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments,
airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instru-
ments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's
own risk.
The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or
sale are prohibited under any applicable laws and regulations.
The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by impli-
cation or otherwise under any patents or other rights of TOSHIBA or the third parties.
Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these
products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled sub-
stances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
This product uses the Super Flash
technology under the licence of Silicon Storage Technology, Inc. Super Flash is registered trademark of Silicon Storage
Technology, Inc.
TMP91FW60
CMOS 16 Bit Microcontroller
TMP91FW60FG/DFG
1.1
Features
High-speed 16-bit CPU (900/L1 CPU)
- Instruction mnemonics are upward-compatible with TLCS-900,900/H,900/L
- 16 Mbytes of linear address space
- General-purpose registers and register banks
- 16-bit multiplication and division instructions; bit transfer and arithmetic instructions
- Micro DMA: 4 channels (800ns/2 bytes at 20MHz)
Minimum instruction execution time:200ns (at 20MHz)
Built-in memory
- ROM:128K bytes (Flash ROM)
- RAM:8K bytes
External memory expansion
- Expandable up to 16 Mbytes (shared program/data area)
- Can simultaneously support 8/16-bit width external data bus
Dynamic data bus syzing
8-bit timers: 6 channels
16-bit timers: 5 channels
General-purpose serial interface: 5 channels
- UART/Synchronous mode: 3 channels
-I2C bus mode: 2 channels
10-bit AD converter (Built-in Sample hold circuit): 16 channels
Special timer for CLOCK
Product No.
ROM
(Flash ROM)
RAM
Package
TMP91FW60FG
128K bytes
8K bytes
LQFP100-P-1414-0.50F
TMP91FW60DFG
QFP100-P-1420-0.65A