参数资料
型号: TPS65930BZCH
厂商: TEXAS INSTRUMENTS INC
元件分类: 消费家电
英文描述: SPECIALTY CONSUMER CIRCUIT, PBGA139
封装: 10 X 10 MM, 0.65 MM PITCH, GREEN, PLASTIC, NFBGA-139
文件页数: 105/115页
文件大小: 1232K
代理商: TPS65930BZCH
SWCS037G
– MAY 2008 – REVISED APRIL 2011
Integrated Power Management
\Audio Codec (TPS65930 Only)
Check for Samples: TPS65930/TPS65920
1
Introduction
The TPS65920/TPS65930 devices are power-management ICs for OMAP
and other mobile
applications. The devices include power-management, a universal serial bus (USB) high-speed (HS)
transceiver, light -emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock
(RTC), and embedded power control (EPC). In addition, the TPS65930 includes a full audio codec with
two digital-to-analog converters (DACs) and two ADCs to implement dual voice channels, and a stereo
downlink channel that can play all standard audio sample rates through a multiple format inter-integrated
sound (I2S
)/time division multiplexing (TDM) interface.
These optimized devices support the power and peripheral requirements of the OMAP application
processors. The power portion of the devices contains three buck converters, two controllable by a
dedicated SmartReflex
class-3 interface, multiple low dropout (LDO) regulators, an EPC to manage the
power sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by
a backup battery when the main supply is not present, and the devices include a coin-cell charger to
recharge the backup battery as needed.
The USB module provides a HS 2.0 OTG transceiver suitable for direct connection to the OMAP UTMI+
low pin interface (ULPI), with an integrated charge pump and full support for the carkit CEA-936A
specification. An ADC is provided for monitoring signals, such as supply voltage, entering the device, and
two additional external ADC inputs are provided for system use.
The devices provide driver circuitry to power two LED circuits that can illuminate a panel or provide user
indicators. The drivers also provide pulse width modulation (PWM) circuits to control the illumination levels
of the LEDs. A keypad interface implements a built-in scanning algorithm to decode hardware-based key
presses and reduce software use, with multiple additional general-purpose input/output devices (GPIOs)
that can be used as interrupts when configured as inputs.
This TPS65920/TPS65930 data manual presents the electrical and mechanical specifications for the
TPS65920 and TPS65930 devices
. It covers the following topics:
TPS65920/TPS65930 terminals: Assignment, multiplexing, electrical characteristics, and functional
description (see Section 2, Terminal Description)
Electrical characteristic requirements: Maximum and recommended operating conditions, digital
input/output (I/O) characteristics (see Section 3, Electrical Characteristics)
Power module: Power provider, power references, power control, power consumption, and power
management, with the on and off sequence (see Section 4, Power Module)
RTC and EPC (see Section 5, Real-Time Clock and Embedded Power Controller)
Audio/voice module (TPS65930 device only): Electrical characteristics and application schematics for
the downlink and uplink paths (see Section 6, Audio/Voice Module (TPS65930 Device Only))
Various modules: USB transceiver, monitoring analog-to-digital converter (MADC), LED drivers, and
keyboard (see Section 8, MADC, Section 9, LED Driver, and Section 10, Keyboard)
Clock specifications: Clock slicer; input and output clocks (see Section 11, Clock Specifications)
Timing requirements and switching characteristics (ac timings) of the interfaces (see Section 12,
Timing Requirements and Switching Characteristics)
Debouncing time (see Section 13, Debouncing Time)
External components for the application schematics (see Section 14, External Components)
Thermal resistance characteristics, device nomenclature, and mechanical data about the available
packaging (see Section 15, TPS65920/TPS65930 Package
)
PRODUCTION DATA information is current as of publication date.
Copyright 2008–2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
相关PDF资料
PDF描述
TPS65950ZXNR SPECIALTY CONSUMER CIRCUIT, PBGA209
TPS65950ZXNT SPECIALTY CONSUMER CIRCUIT, PBGA209
TPS6735Y 2 A SWITCHING REGULATOR, 160 kHz SWITCHING FREQ-MAX, UUC12
TPS6735IP 2 A SWITCHING REGULATOR, 160 kHz SWITCHING FREQ-MAX, PDIP8
TPS6755Y 2 A SWITCHING REGULATOR, 160 kHz SWITCHING FREQ-MAX, UUC8
相关代理商/技术参数
参数描述
TPS65930BZCH 制造商:Texas Instruments 功能描述:IC POWER MANAGEMENT ((NW))
TPS65930BZCHR 功能描述:开关变换器、稳压器与控制器 Int Pwr Mgmt IC RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel
TPS65950A2ZXN 功能描述:PMIC 解决方案 Integ Pwr Mgmt IC RoHS:否 制造商:Texas Instruments 安装风格:SMD/SMT 封装 / 箱体:QFN-24 封装:Reel
TPS65950A2ZXNR 功能描述:PMIC 解决方案 Integ Pwr Mgmt IC RoHS:否 制造商:Texas Instruments 安装风格:SMD/SMT 封装 / 箱体:QFN-24 封装:Reel
TPS65950A3ZXN 功能描述:PMIC 解决方案 Integrated Pwr Mgmt IC RoHS:否 制造商:Texas Instruments 安装风格:SMD/SMT 封装 / 箱体:QFN-24 封装:Reel