参数资料
型号: W25X20BVZPIG
厂商: WINBOND ELECTRONICS CORP
元件分类: PROM
英文描述: 2M X 1 FLASH 2.7V PROM, PDSO8
封装: 6 X 5 MM, GREEN, WSON-8
文件页数: 49/51页
文件大小: 1632K
代理商: W25X20BVZPIG
W25X10BV/20BV/40BV
Publication Release Date: July 10, 2009
- 7 -
Preliminary -- Revision A
6.1
Package Types
W25X10BV/20BV/40BV are offered in an 8-pin plastic 150-mil width SOIC (package code SN) and
6x5-mm WSON (package code ZP), see figures 1a and 1b, respectively. The W25X40BV is offered in
the 208-mil width SOIC (package code SS) and the 300-mil 8-pin PDIP (package code DA), see figure
1c. Package diagrams and dimensions are illustrated at the end of this datasheet.
6.2
Chip Select (/CS)
The SPI Chip Select (/CS) pin enables and disables device operation. When /CS is high the device is
deselected and the Serial Data Output (DO) pin is at high impedance. When deselected, the devices
power consumption will be at standby levels unless an internal erase, program or status register cycle
is in progress. When /CS is brought low the device will be selected, power consumption will increase
to active levels and instructions can be written to and data read from the device. After power-up, /CS
must transition from high to low before a new instruction will be accepted. The /CS input must track
the VCC supply level at power-up (see “Write Protection” and Figure 25). If needed a pull-up resister
on /CS can be used to accomplish this.
6.3
Serial Data Input, Output and IOs (DI, DO, IO0 and IO1)
The W25X10BV/20BV/40BV supports standard SPI and Dual SPI operation. Standard SPI instructions
use the unidirectional DI (input) pin to serially write instructions, addresses or data to the device on the
rising edge of the Serial Clock (CLK) input pin. Standard SPI also uses the unidirectional DO (output)
to read data or status from the device on the falling edge of CLK.
Dual SPI instructions use the bidirectional IO pins to serially write instructions, addresses or data to
the device on the rising edge of CLK and read data or status from the device on the falling edge of
CLK.
6.4
Write Protect (/WP)
The Write Protect (/WP) pin can be used to prevent the Status Register from being written. Used in
conjunction with the Status Register’s Block Protect (BP2, BP1, and BP0) bits and Status Register
Protect (SRP) bit, a portion or the entire memory array can be hardware protected. The /WP pin is
active low.
6.5
HOLD (/HOLD)
The Hold (/HOLD) pin allows the device to be paused while it is actively selected. When /HOLD is
brought low, while /CS is low, the DO pin will be at high impedance and signals on the DIO and CLK
pins will be ignored (don’t care). When /HOLD is brought high, device operation can resume. The
/HOLD function can be useful when multiple devices are sharing the same SPI signals. (“See Hold
function”)
6.6
Serial Clock (CLK)
The SPI Serial Clock Input (CLK) pin provides the timing for serial input and output operations. (“See
SPI Operations”)
相关PDF资料
PDF描述
W7NCF04GH11CS4BG 256M X 16 FLASH 3.3V PROM CARD, 150 ns, UUC
W7NCF04GH11CS4EG 256M X 16 FLASH 3.3V PROM CARD, 150 ns, UUC
W7NCF04GH11CS7FG 256M X 16 FLASH 3.3V PROM CARD, 150 ns, UUC
W7NCF04GH11CS9CG 256M X 16 FLASH 3.3V PROM CARD, 150 ns, UUC
W7NCF08GH11CS3AG 512M X 16 FLASH 3.3V PROM CARD, 150 ns, UUC
相关代理商/技术参数
参数描述
W25X20CLSNIG 功能描述:IC FLASH SPI 2MBIT 8SOIC RoHS:是 类别:集成电路 (IC) >> 存储器 系列:SpiFlash® 标准包装:2,000 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 异步 存储容量:256K (32K x 8) 速度:15ns 接口:并联 电源电压:3 V ~ 3.6 V 工作温度:-40°C ~ 85°C 封装/外壳:28-TSSOP(0.465",11.8mm 宽) 供应商设备封装:28-TSOP 包装:带卷 (TR) 其它名称:71V256SA15PZGI8
W25X20CLSNIG TR 制造商:Winbond Electronics Corp 功能描述:IC FLASH 2MBIT 50MHZ 8SOIC
W25X20CLUXIG 制造商:Winbond Electronics Corp 功能描述:
W25X20CLZPIG 功能描述:IC FLASH SPI 2MBIT 8WSON RoHS:是 类别:集成电路 (IC) >> 存储器 系列:SpiFlash® 标准包装:2,500 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:1K (128 x 8) 速度:100kHz 接口:UNI/O?(单线) 电源电压:1.8 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-TSSOP,8-MSOP(0.118",3.00mm 宽) 供应商设备封装:8-MSOP 包装:带卷 (TR)
W25X20CLZPIG TR 制造商:Winbond Electronics Corp 功能描述:IC FLASH 2MBIT 50MHZ 8WSON