参数资料
型号: XRT83L30IV-F
厂商: Exar Corporation
文件页数: 2/78页
文件大小: 0K
描述: IC LIU LH/SH T1/E1 SGL 64TQFP
标准包装: 160
类型: 线路接口装置(LIU)
驱动器/接收器数: 1/1
规程: T1,E1
电源电压: 3.135 V ~ 3.465 V
安装类型: 表面贴装
封装/外壳: 64-LQFP
供应商设备封装: 64-TQFP(10x10)
包装: 托盘
其它名称: 1016-1633
XRT83L30IV-F-ND
XRT83L30
7
SINGLE-CHANNEL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
REV. 1.0.1
TRANSMITTER
SIGNAL NAME
PIN #
TYPE
DESCRIPTION
TTIP
8
O
Transmitter Tip Output
Positive differential transmit output to the line.
TRING
10
O
Transmitter Ring Output
Negative differential transmit output to the line.
TPOS
TDATA
61
I
Transmitter Positive Data Input
In dual-rail mode, this signal is the positive-rail input data for the transmitter.
Transmitter Data Input
In single-rail mode, this pin is used as the NRZ input data for the transmitter.
NOTE: Internally pulled “Low” with a 50k
resistor.
TNEG
CODES
62
I
Transmitter Negative NRZ Data Input
In dual-rail mode, this signal is the negative-rail input data for the transmitter.
In single-rail mode, this pin can be left unconnected.
Coding Select
In Hardware mode and with single-rail mode selected, connecting this pin
"Low" enables HDB3 in E1 or B8ZS in T1 encoding and decoding. Connect-
ing this pin "High" selects AMI data format.
NOTE: Internally pulled “Low” with a 50k
resistor.
TCLK
60
I
Transmitter Clock Input
E1 rate at 2.048MHz ± 50ppm
T1 rate at 1.544MHz ± 32ppm
During normal operation, both in Host mode and Hardware mode, TCLK is
used for sampling input data at TPOS/TDATA and TNEG/CODES while
MCLK is used as the timing reference for the transmit pulse shaping circuit.
TCLKE
57
I
Transmit Clock Edge
In Hardware mode, with this pin set to a "High", transmit input data is sam-
pled at the rising edge of TCLK. With this pin tied "Low", input data are sam-
pled at the falling edge of TCLK.
NOTE: Internally pulled “Low” with a 50k
resistor.
TXON
58
I
Transmitter Turn On
In Hardware mode, setting this pin "High" turns on the Transmit Section. In
this mode, when TXON = “0”, TTIP and TRING driver outputs will be tri-
stated.
NOTES:
1.
Internally pulled "Low" with a 50k
resistor.
2.
In Hardware mode only, the receiver is turned on at power-up.
相关PDF资料
PDF描述
XRT83L314IB-L IC LIU T1/E1/J1 14CH 304TBGA
XRT83L34IV-F IC LIU T1/E1/J1 QUAD 128TQFP
XRT83L38IB-F IC LIU T1/E1/J1 OCTAL 225BGA
XRT83SH314IB-F IC LIU T1/E1/J1 14CH 304TBGA
XRT83SH38IB-F IC LIU SH T1/E1/J1 8CH 225BGA
相关代理商/技术参数
参数描述
XRT83L314 制造商:EXAR 制造商全称:EXAR 功能描述:14-CHANNEL T1/E1/J1 LONG-HAUL/SHORT-HAUL LINE INTERFACE UNIT
XRT83L314ES 功能描述:LIN 收发器 RoHS:否 制造商:NXP Semiconductors 工作电源电压: 电源电流: 最大工作温度: 封装 / 箱体:SO-8
XRT83L314IB 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
XRT83L314IB-F 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
XRT83L314IB-L 功能描述:LIN 收发器 14 channel, LH/SH T1/E1 LIU RoHS:否 制造商:NXP Semiconductors 工作电源电压: 电源电流: 最大工作温度: 封装 / 箱体:SO-8