参数资料
型号: 101-1109
厂商: Rabbit Semiconductor
文件页数: 23/70页
文件大小: 0K
描述: KIT EMBEDDED PLC APPLICATION
标准包装: 1
系列: Coyote™
类型: MPU 模块
适用于相关产品: BL2500
所含物品: BL2500、ISaGRAF V3.50、嵌入式 PLC 软件内核、ISaGRAF 编程缆线和说明文档
EMBEDDED
PLC BL2500 User’s Manual
Running Sample Applications
3.2 RUNNING APPLICATIONS THAT USE INTERNAL VARIABLES ONLY
The Target PLC and your PC must be connected through Ethernet, RS232 or RS485. Use the following
procedure to run any sample application that uses only internal variables:
1. Open the ISaGRAF Project Management by double-clicking on the ISaGRAF Projects icon on your
Desktop or selecting Start menu → Programs → ISaGRAF 3.5 → Projects . On the Projects
Management window, double-click on the bottlef project.
2. On the BOTTLEF - Programs window select Debug menu → Link setup . On the PC-PLC link
parameters window enter the Target Slave Number (corresponds to the Modbus Slave number of
the Target PLC) and the Communication port ( ETHERNET for Modbus TCP or COM for Modbus RTU
over RS232/RS485):
a) If ETHERNET is selected press Setup button and enter the IP address of the target (default is
192.168.1.100). Press OK button. Press OK button to close the PC-PLC link parameters
window
Caution:
Do not change the port number from 1100 otherwise the Ethernet communication
with the ISaGRAF Workbench will not work. This port is used exclusively by the
communication between ISaGRAF Workbench and the EMBEDDED PLC target.
b) If serial COM port is selected (COM1 – COM4) press Setup button and select either 19200,
9600, 4800, 2400, 1200 or 600 baud rate depending on the current configuration of your
EMBEDDED PLC target.
Note:
The EMBEDDED PLC Kernel supports baud rates from 19200 to 600. The other
parameters are fixed: no parity, 8 data bits, 1 stop bit and no flow control.
Note also that ISaGRAF supports serial ports COM1 to COM4. If you are using a
USB-to-serial converter cable check that the com port assigned is between COM1
and COM4. If not, change the serial port settings on your Windows Operating
System (see Section 7.2). Many USB-to-serial converters are assigned to COM5
port or higher after its installation.
3. Select Debug menu → Debug to open the Debugger window. If Debugger window displays
“<application name> active” message, stop the current application that is running by pressing the
Stop button
on the toolbar or select File menu → Stop application . A “No application” message
is displayed.
4. Download the bottlef application by selecting File menu → Download . Select “RABBIT: TIC code for
Rabbit-based controllers” on the Download window and press Download button. A progress bar on
the Debugger window will show the progress of the downloading process. Once the downloading is
completed the application runs immediately and the SpotLight window is displayed. In the
SpotLight , double-click on the START button and press TRUE button. The bottle production will
start.
OEM Technology Solutions
Page 17
相关PDF资料
PDF描述
101-1147 KIT RIO PROGRAM I/O
101-606 CONN SOCKET IDC 60POS W/KEY GOLD
10113616-01531LF CONN MOD JACK 8PORT 8/8 R/A PCB
10117863-5036010LF CONN MOD JACK 8/8 R/A PCB
10118061-5005010LF CONN MOD JACK 2PORT 8/8 R/A PCB
相关代理商/技术参数
参数描述
10-1110B 制造商:Datak Corporation 功能描述:
101110F9012M440ZA 制造商:SUYIN-USA 制造商全称:SUYIN-USA 功能描述:RJ45 1X1 TAB DOWN W/LED & TRANSFORMER
101110F9017M447ZA 制造商:SUYIN-USA 制造商全称:SUYIN-USA 功能描述:RJ45 1X1 TAB DOWN W/LED & TRANSFORMER
101110F9042M442ZA 制造商:SUYIN-USA 制造商全称:SUYIN-USA 功能描述:RJ45 1X1 TAP DOWN W/LED & TRANSFORMER
101110F9082M446ZA 制造商:SUYIN-USA 制造商全称:SUYIN-USA 功能描述:RJ45 1X1 TAB DOWN W/LED & TRANSFORMER