参数资料
型号: 101-1109
厂商: Rabbit Semiconductor
文件页数: 57/70页
文件大小: 0K
描述: KIT EMBEDDED PLC APPLICATION
标准包装: 1
系列: Coyote™
类型: MPU 模块
适用于相关产品: BL2500
所含物品: BL2500、ISaGRAF V3.50、嵌入式 PLC 软件内核、ISaGRAF 编程缆线和说明文档
EMBEDDED
PLC BL2500 User’s Manual
Loading or Upgrading the Firmware Kernel
2. Enter the desired Modbus Slave Number (Default is 1). Select Use Modbus TCP radio button and fill
the Modbus TCP configuration parameters if you want to use Modbus TCP as communication
protocol. Otherwise select Use RS232 or Use RS485 radio buttons. Once all the configuration
parameters have been entered press OK . The communication protocol and slave number are used to
communicate the Target PLC with the ISaGRAF Workbench and Modbus master.
Note:
The Modbus Slave Number parameter corresponds to the Target Slave Number on
ISaGRAF Workbench (Default is 1). In order to communicate the ISaGRAF Workbench with
a specific Target PLC, both numbers must be the same. This is also valid for
communication between the Target PLC and a Modbus master using Modbus protocol.
3. After pressing OK the following message
dialog box is shown. Press OK and your
EMBEDDED PLC Firmware Kernel will be
active and ready to be used with the
ISaGRAF Workbench (The DS2 red LED
is turned OFF and the DS1-yellow LED
starts flashing every second).
6.2 EMBEDDED PLC UTILITY SOFTWARE REFERENCE
To use the EMBEDDED PLC Utility you must have an EMBEDDED PLC Firmware Kernel (.bin file) to load to
your Rabbit-based controller. Click on File → Load Flash Image ; enter the .bin file’s location in the
dialog box and click OK .
This Utility works only with serial connection and it requires the programming cable for the Rabbit-based
controller (1.27mm programming cable for Rabbit 3000 microprocessor based controllers).
This Utility downloads ONLY EMBEDDED PLC Firmware Kernels. If you want to download another binary
file generated with Dynamic C use the Rabbit Field Utility (RFU) that comes in the Dynamic C installation.
6.2.1 Menu Commands
6.2.1.1 File → Load Flash Image
Allows a EMBEDDED PLC Kernel (.bin file) to be chosen as the file to be loaded. Clicking the ellipses
button ( … ) brings up an Open File dialog box to browse for a file’s location.
6.2.1.2 Setup → Communications
This version of the EMBEDDED PLC Utility only supports Serial Connection.
The default com port is COM1.
The default baud rate is 115200 bps.
If the host PC is using a different com port, change the default to match the port being used by the PC. If
the BIOS is using a different baud rate, change the default to match the baud rate being used by the
BIOS.
6.2.1.3 Setup → File Locations
The first time EMBEDDED PLC Utility runs, it assumes that coldload.bin , pilot.bin and flash.ini
are located in the EMBEDDED PLC Utility subdirectory. Those files are installed by the EMBEDDED PLC
installation process.
The Rabbit Field Utility can be run from a different location if the location of coldload.bin and
pilot.bin are specified using Setup → File Locations .
OEM Technology Solutions
Page 51
相关PDF资料
PDF描述
101-1147 KIT RIO PROGRAM I/O
101-606 CONN SOCKET IDC 60POS W/KEY GOLD
10113616-01531LF CONN MOD JACK 8PORT 8/8 R/A PCB
10117863-5036010LF CONN MOD JACK 8/8 R/A PCB
10118061-5005010LF CONN MOD JACK 2PORT 8/8 R/A PCB
相关代理商/技术参数
参数描述
10-1110B 制造商:Datak Corporation 功能描述:
101110F9012M440ZA 制造商:SUYIN-USA 制造商全称:SUYIN-USA 功能描述:RJ45 1X1 TAB DOWN W/LED & TRANSFORMER
101110F9017M447ZA 制造商:SUYIN-USA 制造商全称:SUYIN-USA 功能描述:RJ45 1X1 TAB DOWN W/LED & TRANSFORMER
101110F9042M442ZA 制造商:SUYIN-USA 制造商全称:SUYIN-USA 功能描述:RJ45 1X1 TAP DOWN W/LED & TRANSFORMER
101110F9082M446ZA 制造商:SUYIN-USA 制造商全称:SUYIN-USA 功能描述:RJ45 1X1 TAB DOWN W/LED & TRANSFORMER