参数资料
| 型号： | AD5371BSTZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/29页 |
| 文件大小： | 0K |
| 描述： | IC DAC 14BIT 40CH SER 80-LQFP |
| 标准包装： | 1 |
| 设置时间： | 20µs |
| 位数： | 14 |
| 数据接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 40 |
| 电压电源： | 模拟和数字，双 ± |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 80-LQFP |
| 供应商设备封装： | 80-LQFP（12x12） |
| 包装： | 托盘 |
| 输出数目和类型： | 40 电压，单极；40 电压，双极 |
| 采样率（每秒）： | * |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页
AD5371
Rev. B | Page 15 of 28
TERMINOLOGY
Integral Nonlinearity (INL)
Integral nonlinearity, or endpoint linearity, is a measure of the
maximum deviation from a straight line passing through the
endpoints of the DAC transfer function. It is measured after
adjusting for zero-scale error and full-scale error and is
expressed in least significant bits (LSB).
Differential Nonlinearity (DNL)
Differential nonlinearity is the difference between the measured
change and the ideal 1 LSB change between any two adjacent
codes. A specified differential nonlinearity of 1 LSB maximum
ensures monotonicity.
Zero-Scale Error
Zero-scale error is the error in the DAC output voltage when
all 0s are loaded into the DAC register. Zero-scale error is a
measure of the difference between VOUT (actual) and VOUT
(ideal), expressed in millivolts (mV), when the channel is at its
minimum value. Zero-scale error is mainly due to offsets in the
output amplifier.
Full-Scale Error
Full-scale error is the error in the DAC output voltage when all
1s are loaded into the DAC register. Full-scale error is a measure
of the difference between VOUT (actual) and VOUT (ideal),
expressed in millivolts, when the channel is at its maximum
value. Full-scale error does not include zero-scale error.
Gain Error
Gain error is the difference between full-scale error and
zero-scale error. It is expressed as a percentage of the full-
scale range (FSR).
Gain Error = Full-Scale Error Zero-Scale Error
VOUT Temperature Coefficient
The VOUT temperature coefficient includes output error
contributions from linearity, offset, and gain drift.
DC Output Impedance
DC output impedance is the effective output source resistance.
It is dominated by package lead resistance.
DC Crosstalk
The DAC outputs are buffered by op amps that share common
VDD and VSS power supplies. If the dc load current changes in
one channel (due to an update), this change can result in a
further dc change in one or more channel outputs. This effect is
more significant at high load currents and is reduced as the load
currents are reduced. With high impedance loads, the effect is
virtually immeasurable. Multiple VDD and VSS terminals are
provided to minimize dc crosstalk.
Output Voltage Settling Time
Output voltage settling time is the amount of time it takes for
the output of a DAC to settle to a specified level for a full-scale
input change.
Digital-to-Analog Glitch Energy
Digital-to-analog glitch energy is the amount of energy that is
injected into the analog output at the major code transition. It
is specified as the area of the glitch in nV-s. It is measured by
toggling the DAC register data between 0x1FFF and 0x2000.
Channel-to-Channel Isolation
Channel-to-channel isolation refers to the proportion of input
signal from the reference input of one DAC that appears at the
output of another DAC operating from another reference. It is
expressed in decibels and measured at midscale.
DAC-to-DAC Crosstalk
DAC-to-DAC crosstalk is the glitch impulse that appears at the
output of one converter due to both the digital change and
subsequent analog output change at another converter. It is
specified in nV-s.
Digital Crosstalk
Digital crosstalk is defined as the glitch impulse transferred to
the output of one converter due to a change in the DAC register
code of another converter. It is specified in nV-s.
Digital Feedthrough
When the device is not selected, high frequency logic activity
on the digital inputs of the device can be capacitively coupled
both across and through the device to appear as noise on the
VOUTx pins. It can also be coupled along the supply and
ground lines. This noise is digital feedthrough.
Output Noise Spectral Density
Output noise spectral density is a measure of internally gener-
ated random noise. Random noise is characterized as a spectral
density (voltage per √Hz). It is measured by loading all DACs
to midscale and measuring noise at the output. It is measured
in nV/√Hz.
相关PDF资料 |
PDF描述 |
|---|---|
| AD5383BSTZ-5 | IC DAC 12BIT 32CH 5V 100-LQFP |
| AD5384BBCZ-5 | IC DAC 14BIT 40CH 5V 100-CSPBGA |
| AD5398BCPZ-REEL | IC DAC 10BIT CURRENT-SINK 8LFCSP |
| AD5420AREZ-REEL7 | IC DAC 16BIT 1CH SER 24TSSOP |
| AD5425YRM | IC DAC MULTIPLYING 8BIT 10-MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5371BSTZ-REEL | 功能描述:IC DAC 14BIT 40CH SER 80-LQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1,000 系列:- 设置时间:1µs 位数:8 数据接口:串行 转换器数目:8 电压电源:双 ± 功率耗散（最大）:941mW 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC W 包装:带卷 (TR) 输出数目和类型:8 电压，单极 采样率（每秒）:* |
| AD5372 | 制造商:AD 制造商全称:Analog Devices 功能描述:32-Channel, 16/14, Serial Input, Voltage-Output DACs |
| AD5372BCPZ | 制造商:Analog Devices 功能描述:DAC 32CH-CH RES-STRING 16BIT 56LFCSP EP - Trays |
| AD5372BCPZ-REEL7 | 制造商:Analog Devices 功能描述:DAC 32CH-CH RES-STRING 16BIT 56LFCSP EP - Tape and Reel |
| AD5372BCPZ-RL7 | 功能描述:16 Bit Digital to Analog Converter 32 56-LFCSP-VQ (8x8) 制造商:analog devices inc. 系列:- 包装:带卷（TR） 零件状态:上次购买时间 位数:16 数模转换器数:32 建立时间:30μs 输出类型:Voltage - Buffered 差分输出:无 数据接口:SPI，DSP 参考类型:外部 电压 - 电源，模拟:9 V ~ 16.5 V，-4.5 V ~ 16.5 V 电压 - 电源，数字:2.5 V ~ 5.5 V INL/DNL（LSB）:±4（最大），±1（最大） 架构:电阻串 DAC 工作温度:-40°C ~ 85°C 封装/外壳:56-VFQFN 裸露焊盘，CSP 供应商器件封装:56-LFCSP-VQ（8x8） 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。