参数资料
型号: AD7195BCPZ-RL7
厂商: Analog Devices Inc
文件页数: 19/45页
文件大小: 0K
描述: IC AFE 24BIT 4.8K 32LFSP
设计资源: Precision Weigh Scale Design Using AD7195 with Internal PGA and AC Excitation (CN0155)
标准包装: 1,500
位数: 24
通道数: 4
电压 - 电源,模拟: 4.75 V ~ 5.25 V
电压 - 电源,数字: 2.7 V ~ 5.25 V
封装/外壳: 32-WFQFN 裸露焊盘,CSP
供应商设备封装: 32-LFCSP-WQ(5x5)
包装: 带卷 (TR)
AD7195
Rev. 0 | Page 25 of 44
ADC CIRCUIT INFORMATION
MCLK1 MCLK2
DVDD DGND
REFIN(+)
REFIN(–)
AIN1
AIN2
AIN3
AIN4
AINCOM
BPDSW
AD7195
REFERENCE
DETECT
SERIAL
INTERFACE
AND
CONTROL
LOGIC
TEMP
SENSOR
AC
EXCITATION
CLOCK
CIRCUITRY
DOUT/RDY
DIN
SCLK
CS
SYNC
AVDD
AGND
Σ-Δ
ADC
PGA
MUX
ACX1
ACX2
08
77
1-
00
1
Figure 18. Block Diagram
OVERVIEW
The AD7195 is an ultralow noise ADC that incorporates a Σ-Δ
modulator, a buffer, PGA, and on-chip digital filtering intended
for the measurement of wide dynamic range signals, such as
those in pressure transducers, weigh scales, and strain gage
applications. Figure 18 shows the block diagram for the part.
Analog Inputs
The device can be configured to have two differential or four
pseudo differential analog inputs. The analog inputs can be
buffered or unbuffered.
Multiplexer
The on-chip multiplexer increases the channel count of the
device. Because the multiplexer is included on chip, any
channel changes are synchronized with the conversion process.
PGA
The analog input signal can be amplified using the PGA. The
PGA allows gains of 1, 8, 16, 32, 64, and 128.
Reference Detect
The AD7195 is capable of monitoring the external reference. If
the reference is not present, a flag is set in the status register of
the device.
Burnout Currents
Two 500 nA burnout currents are included on-chip to detect
the presence of the external sensor.
Σ-Δ ADC and Filter
The AD7195 contains a fourth-order Σ-Δ modulator followed
by a digital filter. The device offers the following filter options:
Sinc4
Sinc3
Chop enabled/disabled
Zero latency
AC Excitation
The AD7195 supports ac excitation of load cells. It provides the
four logic outputs needed to control the transistors in an ac
excited load cell design.
Serial Interface
The AD7195 has a 4-wire SPI. The on-chip registers are
accessed via the serial interface.
Clock
The AD7195 has an internal 4.92 MHz clock. Either this clock
or an external clock can be used as the clock source to the
AD7195. The internal clock can also be made available on a
pin if a clock source is required for external circuitry.
Temperature Sensor
The on-chip temperature sensor monitors the die temperature.
Calibration
Both internal and system calibration are included on chip; thus,
the user has the option of removing offset/gain errors internal
to the AD7195 only, or removing the offset/gain errors of the
complete end system.
相关PDF资料
PDF描述
AD7225BQ IC DAC 8BIT QUAD W/AMP 24-CDIP
AD7226BQ IC DAC 8BIT QUAD W/AMP 20-CDIP
AD7228CQ IC DAC 8BIT OCTAL W/AMP 24-CDIP
AD7233BNZ IC DAC 12BIT SRL W/AMP 8PDIP
AD7243BQ IC DAC 12BIT W/AMP W/REF 16-CDIP
相关代理商/技术参数
参数描述
AD71L 制造商:Johnson Components 功能描述:ADAPT - Bulk
AD72 制造商:Distributed By MCM 功能描述:REFRIGERATR DOOR GASKET DIRECT
AD720 制造商:AD 制造商全称:Analog Devices 功能描述:RGB to NTSC/PAL Encoders
AD720-00E 功能描述:SENSOR MAG SW 28G STANDRD 8-MSOP 制造商:nve corp/sensor products 系列:AD 包装:管件 零件状态:有效 功能:全极开关 技术:霍尔效应 极化:任意一种 感应范围:±3.4mT 跳闸,±1.4mT 释放 测试条件:-40°C ~ 125°C 电压 - 电源:4.5 V ~ 30 V 电流 - 电源(最大值):4.5mA 电流 - 输出(最大值):20mA 输出类型:开路集电极 特性:- 工作温度:-40°C ~ 125°C(TA) 封装/外壳:8-TSSOP,8-MSOP(0.118",3.00mm 宽) 供应商器件封装:8-MSOP 标准包装:1,000
AD720-02E 功能描述:SENSOR MAG SW 28G STANDARD 8SOIC 制造商:nve corp/sensor products 系列:AD 包装:管件 零件状态:有效 功能:全极开关 技术:霍尔效应 极化:任意一种 感应范围:±3.4mT 跳闸,±1.4mT 释放 测试条件:-40°C ~ 125°C 电压 - 电源:4.5 V ~ 30 V 电流 - 电源(最大值):4.5mA 电流 - 输出(最大值):20mA 输出类型:开路集电极 特性:- 工作温度:-40°C ~ 125°C(TA) 封装/外壳:8-SOIC(0.154",3.90mm 宽) 供应商器件封装:8-SOIC 标准包装:1,000