参数资料
| 型号： | AD7793BRU |
| 厂商： | Analog Devices Inc |
| 文件页数： | 13/33页 |
| 文件大小： | 0K |
| 描述： | IC ADC 24BIT 3CH LP 16-TSSOP |
| 设计资源： | Fully Isolated Input Module Based on AD7793 and ADuM5401(CN0066) Fully Isolated Input Module Based on AD7793, ADuM5401, and a High Performance In-Amp (CN0067) |
| 标准包装： | 1 |
| 位数： | 24 |
| 采样率（每秒）： | 500 |
| 数据接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 2.5mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 16-TSSOP |
| 包装： | 管件 |
| 输入数目和类型： | 3 个差分，单极；3 个差分，双极 |
| 配用： | EVAL-AD7793EBZ-ND - BOARD EVALUATION FOR AD7793 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页当前第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页
AD7792/AD7793
Rev. B | Page 19 of 32
Table 18. IO Register Bit Designations
Bit Location
Bit Name
Description
IO7 to IO4
0
These bits must be programmed with a Logic 0 for correct operation.
IO3 to IO2
IEXCDIR1 to
IEXCDIR0
Direction of current sources select bits.
IEXCDIR1
IEXCDIR0
Current Source Direction
0
Current Source IEXC1 connected to Pin IOUT1, Current Source IEXC2
connected to Pin IOUT2.
0
1
Current Source IEXC1 connected to Pin IOUT2, Current Source IEXC2
connected to Pin IOUT1.
1
0
Both current sources connected to Pin IOUT1. Permitted when the current
sources are set to 10 μA or 210 μA only.
1
Both current sources connected to Pin IOUT2. Permitted when the current
sources are set to 10 μA or 210 μA only.
IO1 to IO0
IEXCEN1 to
IEXCEN0
These bits are used to enable and disable the current sources along with selecting the value of the
excitation currents.
IEXCEN1
IEXCEN0
Current Source Value
0
Excitation Current Disabled.
0
1
10 μA
1
0
210 μA
1
1 mA
OFFSET REGISTER
RS2, RS1, RS0 = 1, 1, 0; Power-On/Reset = 0x8000
(AD7792)/0x800000 (AD7793)
Each analog input channel has a dedicated offset register that
holds the offset calibration coefficient for the channel. This
register is 16 bits wide on the AD7792 and 24 bits wide on the
AD7793, and its power-on/reset value is 0x8000(00). The offset
register is used in conjunction with its associated full-scale
register to form a register pair. The power-on-reset value is
automatically overwritten if an internal or system zero-scale
calibration is initiated by the user. The offset register is a
read/write register. However, the AD7792/AD7793 must be
in idle mode or power-down mode when writing to the
offset register.
FULL-SCALE REGISTER
RS2, RS1, RS0 = 1, 1, 1; Power-On/Reset = 0x5XXX
(AD7792)/0x5XXX00 (AD7793)
The full-scale register is a 16-bit register on the AD7792 and a
24-bit register on the AD7793. The full-scale register holds the
full-scale calibration coefficient for the ADC. The
AD7792/AD7793 have 3 full-scale registers, each channel
having a dedicated full-scale register. The full-scale registers are
read/write registers; however, when writing to the full-scale
registers, the ADC must be placed in power-down mode or idle
mode. These registers are configured on power-on with factory-
calibrated full-scale calibration coefficients, the calibration
being performed at gain = 1. Therefore, every device has
different default coefficients. The coefficients are different
depending on whether the internal reference or an external
reference is selected. The default value is automatically
overwritten if an internal or system full-scale calibration is
initiated by the user, or the full-scale register is written to.
相关PDF资料 |
PDF描述 |
|---|---|
| AD7794BRU | IC ADC 24BIT 6CH LP 24-TSSOP |
| AD7797BRUZ-REEL | IC ADC 24BIT SIG-DEL 1CH 16TSSOP |
| AD7799BRU | IC ADC 24BIT 3CH LP 16-TSSOP |
| AD7801BRU | IC DAC 8BIT PARALLEL INP 20TSSOP |
| AD7810YR | IC ADC 10BIT 2.7V 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7793BRU-REEL | 制造商:Analog Devices 功能描述:ADC Single Delta-Sigma 470sps 24-bit Serial 16-Pin TSSOP T/R 制造商:Analog Devices 功能描述:ADC SGL DELTA-SIGMA 0.47KSPS 24BIT SERL 16TSSOP - Tape and Reel |
| AD7793BRUZ | 功能描述:IC ADC 24BIT SIG-DEL 3CH 16TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率（每秒）:1M 数据接口:串行，SPI? 转换器数目:1 功率耗散（最大）:- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘（4x4） 包装:Digi-Reel® 输入数目和类型:8 个单端，单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6 |
| AD7793BRUZ1 | 制造商:AD 制造商全称:Analog Devices 功能描述:3-Channel, Low Noise, Low Power, 16-/24-Bit ?￡-?? ADC with On-Chip In-Amp and Reference |
| AD7793BRUZ-REEL | 功能描述:IC ADC 24BIT 3CH LP 16-TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| AD7793BRUZ-REEL1 | 制造商:AD 制造商全称:Analog Devices 功能描述:3-Channel, Low Noise, Low Power, 16-/24-Bit ?￡-?? ADC with On-Chip In-Amp and Reference |
发布紧急采购，3分钟左右您将得到回复。