参数资料
| 型号： | AD8155ACPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 16/36页 |
| 文件大小： | 0K |
| 描述： | IC MUX/DEMUX DUAL BUFFER 64LFCSP |
| 标准包装： | 1 |
| 系列： | XStream™ |
| 功能： | 多路复用器/多路分解器 |
| 电路： | 2 x 2:1 |
| 电压电源： | 单电源 |
| 电压 - 电源，单路/双路(±)： | 1.6 V ~ 3.6 V |
| 电流 - 电源： | 735mA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 64-LFCSP-VQ（9x9） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页
AD8155
Rev. 0 | Page 23 of 36
Power Saving Considerations
Whereas the AD8155 power consumption is very low compared
to similar devices, careful control of its operating conditions can
yield further power savings. Significant power reduction can be
realized by operating the part at a lower voltage. Compared to
3.3 V operation, a supply voltage of 1.8 V can result in power
savings of ~45%. There is no performance penalty when oper-
ting at lower voltage. An initialization sequence is required to
enable the AD8155 in a low power mode (see the Applications
Information section).
A second measure is to disable transmitters when they are not
being used. This can be done on a static basis if the output is
not used or on a dynamic basis if the output does not have a
constant stream of traffic. On transmit disable (Register 0x48,
Register 0x88, Register 0xC8), both the predriver and output
switch currents are disabled. The LOS-activated squelch
disables only the output switch current, ITOT. Superior power
saving is achieved by using the TX and RX disable registers to
turn off an unused lane as opposed to relying on the AD8155
transmit squelch feature.
Because the majority of the power dissipated is in the output
stage, some of its flexibility can be used to lower the power
consumption. First, the output current and output preemphasis
settings can be programmed to the smallest amount required to
maintain BER performance. If an output circuit always has a
short length and the receiver has good sensitivity, then a lower
output current can be used.
It is also possible to lower the voltage on VTTO to lower the
power dissipation. The amount that VTTO can be lowered is
dependent on the lowest of all the output’s VOL and VCC. This
is determined by the output that is operating at the highest
output levels.
相关PDF资料 |
PDF描述 |
|---|---|
| AD8156ABCZ | IC SWITCH XPT 4X4 W/EQ 49CSPBGA |
| AD8158ACPZ | IC MUX/DEMUX QUAD 2X1 100LFCSP |
| AD8159ASVZ | IC MUX/DEMUX QUAD BUFF 100TQFP |
| AD8174ANZ | IC MUX SW W/AMP 250MHZ 14-DIP |
| AD8175ABPZ | IC CROSSPOINT SWITCH TRPL 676BGA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD8155ACPZ-R7 | 功能描述:IC MUX/DEMUX DUAL BUFFER 64LFCSP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:XStream™ 其它有关文件:STG4159 View All Specifications 标准包装:5,000 系列:- 功能:开关 电路:1 x SPDT 导通状态电阻:300 毫欧 电压电源:双电源 电压 - 电源，单路/双路(±):±1.65 V ~ 4.8 V 电流 - 电源:50nA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:7-WFBGA，FCBGA 供应商设备封装:7-覆晶 包装:带卷 (TR) |
| AD8155-EVALZ | 制造商:AD 制造商全称:Analog Devices 功能描述:6.5 Gbps Dual Buffer Mux/Demux |
| AD8155XCPZ | 制造商:Analog Devices 功能描述: |
| AD8156 | 制造商:AD 制造商全称:Analog Devices 功能描述:6.25 Gbps 4】4 Digital Crosspoint Switch with EQ |
| AD8156ABCZ | 功能描述:IC SWITCH XPT 4X4 W/EQ 49CSPBGA RoHS:是 类别:集成电路 (IC) >> 接口 - 专用 系列:XStream™ 特色产品:NXP - I2C Interface 标准包装:1 系列:- 应用:2 通道 I²C 多路复用器 接口:I²C，SM 总线 电源电压:2.3 V ~ 5.5 V 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:剪切带 (CT) 安装类型:表面贴装 产品目录页面:825 (CN2011-ZH PDF) 其它名称:568-1854-1 |
发布紧急采购，3分钟左右您将得到回复。