参数资料
| 型号： | AD9600ABCPZ-150 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 39/72页 |
| 文件大小： | 0K |
| 描述： | IC ADC 10BIT 150MSPS 64LFCSP |
| 标准包装： | 1 |
| 位数： | 10 |
| 采样率（每秒）： | 150M |
| 数据接口： | 串行，SPI? |
| 转换器数目： | 2 |
| 功率耗散（最大）： | 890mW |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 64-LFCSP-VQ（9x9） |
| 包装： | 托盘 |
| 输入数目和类型： | 4 个单端，单极；2 个差分，单极 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页当前第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页
AD9600
Rev. B | Page 44 of 72
Addr
(Hex)
Register
Name
Bit 7
(MSB)
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
(LSB)
Default
Value
(Hex)
Default
Notes/
Comments
0x118
Signal Monitor
Result
Channel A
Register 2
(Global)
Open
Signal Monitor Value Channel A [19:16]
Read only.
0x119
Signal Monitor
Result
Channel B
Register 0
(Global)
Signal Monitor Result Channel B [7:0]
Read only.
0x11A
Signal Monitor
Result
Channel B
Register 1
(Global)
Signal Monitor Result Channel B [15:8]
Read only.
0x11B
Signal Monitor
Result
Channel B
Register 2
(Global)
Open
Signal Monitor Result Channel B [19:16]
Read only.
MEMORY MAP REGISTER DESCRIPTION
For information about functions controlled in Register 0x00 to
Register 0xFF, see Application Note AN-877, Interfacing to High
Speed ADCs via SPI.
Sync Control (Register 0x100)
Bit 7—Signal Monitor Sync Enable
Bit 7 enables the sync pulse from the external sync input to the
signal monitor block. The sync signal is passed when both Bit 7
and Bit 0 are high. This is continuous sync mode.
Bits [6:3]—Reserved
Bit 2—Clock Divider Next Sync Only
If the master sync enable bit (Address 0x100 [0]) is high and the
clock divider sync enable bit (Address 0x100 [1]) is high, the
clock divider next sync only bit (Address 0x100 [2]) allows the
clock divider to sync to the first sync pulse it receives and ignore
the rest. The clock divider sync enable bit (Address 0x100 [1])
resets after it syncs.
Bit 1—Clock Divider Sync Enable
Bit 1 gates the sync pulse to the clock divider. The sync signal is
passed when both Bit 1 and Bit 0 are high. This is continuous
sync mode.
Bit 0—Master Sync Enable
Bit 0 must be high to enable the sync functions.
Fast Detect Control (Register 0x104)
Bits [7:4]—Reserved
Bits [3:1]—Fast Detect Mode Select
These bits set the mode of the fast detect output pins according
to Table 14.
Bit 0—Fast Detect Enable
Bit 0 is used to enable the fast detect output pins. When the fast
detect output pins are disabled, the outputs go into a high
impedance state. In LVDS mode, when the fast detect output
pins are interleaved, the outputs go high-Z only if both channels
are turned off (power-down/standby/output disabled). If only one
channel is turned off (power-down/standby/output disabled), the
fast detect output pins repeat the data of the active channel.
Coarse Upper Threshold (Register 0x105)
Bits [7:3]—Reserved
Bits [2:0]—Coarse Upper Threshold
These bits set the level required to assert the coarse upper
threshold indication (see Table 18).
Fine Upper Threshold (Register 0x106 and Register 0x107)
Register 0x106, Bits [7:0]—Fine Upper Threshold [7:0]
Register 0x107, Bits [7:5]—Reserved
Register 0x107, Bits [4:0]—Fine Upper Threshold [12:8]
These registers provide the fine upper limit threshold. This 13-bit
value is compared with the 10-bit magnitude from the ADC
block. If the ADC magnitude exceeds this threshold value, the
F_UT indicator is set.
Fine Lower Threshold (Register 0x108 and Register 0x109)
Register 0x108, Bits [7:0]—Fine Lower Threshold [7:0]
Register 0x109, Bits [7:5]—Reserved
Register 0x109, Bits [4:0]—Fine Lower Threshold [12:8]
These registers provide a fine lower limit threshold. This 13-bit
value is compared with the 10-bit magnitude from the ADC
block. If the ADC magnitude is less than this threshold value,
the F_LT indicator is set.
相关PDF资料 |
PDF描述 |
|---|---|
| AD9608BCPZRL7-125 | IC ADC 10BIT 125MSPS 64LFCSP |
| AD9609BCPZRL7-80 | IC ADC 10BIT SRL/SPI 80M 32LFCSP |
| AD9613BCPZ-170 | IC ADC 12BIT SRL 170MSPS 64LFCSP |
| AD9627ABCPZ-125 | IC ADC 12BIT 1255MSPS 64LFCSP |
| AD9627ABCPZ11-150 | IC ADC 11BIT 150MSPS 64LFCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD9600BCPZ-105 | 制造商:Analog Devices 功能描述:ADC Dual Pipelined 105Msps 10-bit Parallel/LVDS 64-Pin LFCSP EP |
| AD9600BCPZ-125 | 制造商:Analog Devices 功能描述:ADC Dual Pipelined 125Msps 10-bit Parallel/LVDS 64-Pin LFCSP EP |
| AD9600BCPZ-150 | 制造商:Analog Devices 功能描述: |
| AD9601 | 制造商:AD 制造商全称:Analog Devices 功能描述:10-Bit, 200 MSPS/250 MSPS 1.8 V Analog-to-Digital Converter |
| AD9601-250EBZ | 功能描述:数据转换 IC 开发工具 10-Bit 250 Msps LowPwr CMOS ADC RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
发布紧急采购，3分钟左右您将得到回复。