参数资料
型号: B80547RE083256
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 3060 MHz, MICROPROCESSOR, PBGA775
封装: FLIP CHIP, LGA-775
文件页数: 91/94页
文件大小: 2796K
代理商: B80547RE083256
Datasheet
91
Boxed Processor Specifications
If the boxed processor fan heatsink 4-pin connector is connected to a 4-pin motherboard header and
the motherboard is designed with a fan speed controller with PWM output (see CONTROL in
Table 7-1) and remote thermal diode measurement capability, the boxed processor will operate as
follows:
As processor power has increased the required thermal solutions have generated increasingly more
noise. Intel has added an option to the boxed processor that allows system integrators to have a
quieter system in the most common usage.
The 4th wire PWM solution provides better control over chassis acoustics. This is achieved by
more accurate measurement of processor die temperature through the processor’s temperature
diode (TDIODE). Fan RPM is modulated through the use of an ASIC located on the motherboard
that sends out a PWM control signal to the 4th pin of the connector labeled as CONTROL. The fan
speed is based on actual processor temperature instead of internal ambient chassis temperatures.
If the new 4-pin active fan heat sink solution is connected to an older 3-pin baseboard, processor
fan header, it will default back to a thermistor controlled mode, allowing compatibility with
existing 3-pin baseboard designs. Under thermistor controlled mode, the fan RPM is automatically
varied based on the inlet temperature measured by a thermistor located at the fan inlet.
Note:
For more details on specific motherboard requirements for 4-wire based fan speed control, see the
Intel Pentium 4 Processor on 90 nm Process in the 775-Land LGA Package Thermal Design
Guide.
§
Table 7-2. Boxed Processor Fan Heatsink Set Points
Boxed Processor
Fan Heatsink Set
Point (C)
Boxed Processor Fan Speed
Notes
X
≤ 30
When the internal chassis temperature is below or equal to this set
point, the fan operates at its lowest speed. Recommended maximum
internal chassis temperature for nominal operating environment.
1
NOTES:
1.
Set point variance is approximately ±1°C from fan heatsink to fan heatsink.
Y = 34
When the internal chassis temperature is at this point, the fan operates
between its lowest and highest speeds. Recommended maximum
internal chassis temperature for worst-case operating environment.
Z
≥ 38
When the internal chassis temperature is above or equal to this set
point, the fan operates at its highest speed.
相关PDF资料
PDF描述
BX80547RE2800CN 32-BIT, 2930 MHz, MICROPROCESSOR, PBGA775
BX80547RE3066C 32-BIT, 3060 MHz, MICROPROCESSOR, PBGA775
BX80547RE3200CN 32-BIT, 3200 MHz, MICROPROCESSOR, PBGA775
BX80547RE3066CN 32-BIT, 3060 MHz, MICROPROCESSOR, PBGA775
B80547RE061256 32-BIT, 2530 MHz, MICROPROCESSOR, PBGA775
相关代理商/技术参数
参数描述
B8055 功能描述:函数发生器与合成器 Function Generator 5MHz RoHS:否 制造商:Tektronix 频率:20 MHz 设备类型:Function Generators
B-80-6 制造商:Hozan Tool Industrial Co Ltd 功能描述:
B8062N 制造商:Laird Technologies Inc 功能描述:WHIP,MC,1/2,806-899 MHZ
B8062NCO 功能描述:ACCY MISC RC B8062N ANTENNA RoHS:是 类别:RF/IF 和 RFID >> RF配件 系列:* 标准包装:1 系列:*
B8063 制造商:Laird Technologies Inc 功能描述:WHIP,MC,5/8,806-866 MHZ