- 您现在的位置：买卖IC网 > PDF目录295335 > CS5165GDWR16 (ON SEMICONDUCTOR) 1.5 A SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, PDSO16 PDF资料下载
参数资料
| 型号： | CS5165GDWR16 |
| 厂商： | ON SEMICONDUCTOR |
| 元件分类： | 稳压器 |
| 英文描述： | 1.5 A SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, PDSO16 |
| 封装： | SOIC-16 |
| 文件页数： | 6/21页 |
| 文件大小： | 718K |
| 代理商： | CS5165GDWR16 |
CS5165
http://onsemi.com
14
Figure 18. Demonstration Board Hiccup Mode Short
Circuit Protection. Gate Pulses are Delivered While
the Soft Start Capacitor Charges, and Cease During
Discharge
M 25.0 ms
Trace 3 Soft Start Timing Capacitor (1.0 V/div.)
Trace 4 5.0 V Supply Voltage (2.0 V/div.)
Trace 2 Inductor Switching Node (2.0 V/div.)
Figure 19. Demonstration Board Startup with
Regulator Output Shorted To Ground
M 50.0 μs
Trace 4 5.0 V from PC Power Supply (2.0 V/div.)
Trace 2 Inductor Switching Node (2.0 V/div.)
Overvoltage Protection
Overvoltage protection (OVP) is provided as result of the
normal operation of the V2 control topology and requires no
additional external components. The control loop responds
to an overvoltage condition within 100 ns, causing the top
MOSFET to shut off, disconnecting the regulator from it’s
input voltage. The bottom MOSFET is then activated,
resulting in a “crowbar” action to clamp the output voltage
regulator will remain in this state until the overvoltage
condition ceases or the input voltage is pulled low. The
bottom FET and board trace must be properly designed to
implement the OVP function. If a dedicated OVP output is
required, it can be implemented using the circuit in Figure
22. In this figure the OVP signal will go high (overvoltage
condition), if the output voltage (VCORE) exceeds 20% of
the voltage set by the particular DAC code and provided that
PWRGD is low. It is also required that the overvoltage
condition be present for at least the PWRGD delay time for
the OVP signal to be activated. The resistor values shown in
(overvoltage trippoint) can be set using the following
equation:
VOVP + VBEQ3 1 ) R2
R1
Figure 20. OVP Response to an InputtoOutput
Short Circuit by Immediately Providing 0% Duty
Cycle, CrowBarring the Input Voltage to Ground
M 10.0 μs
Trace 1 Regulator Output Voltage (1.0 V/div.)
Trace 2 Inductor Switching Node 5.0 V/div.)
Trace 4 5.0 V from PC Power Supply (5.0 V/div.)
相关PDF资料 |
PDF描述 |
|---|---|
| CS5332GDW28 | 1.5 A SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, PDSO28 |
| CS600/L2 | 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER |
| CSBLA384KECE-B0 | CERAMIC RESONATOR, 0.384 MHz |
| CSC5026-0102F | 16 CONTACT(S), COMBINATION LINE CONNECTOR, SOCKET |
| CSD10030 | ZERO RECOVERY RECTIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CS-5165HDW16 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-Mode SMPS Controller |
| CS-5165HDWR16 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-Mode SMPS Controller |
| CS5165HGDW16 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| CS5165HGDWR16 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| CS5166 | 功能描述:SCREWDRIVER,5/16"X6",SLOTTED 制造商:apex tool group 系列:* 零件状态:在售 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。