收藏本站
参数资料
型号： DS26334GNA3+
厂商： Maxim Integrated Products
文件页数： 47/121页
文件大小： 0K
描述： IC LIU E1/T1/J1 3.3V 256-CSBGA
产品培训模块： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装： 90
类型： 线路接口装置（LIU）
驱动器/接收器数： 16/16
规程： IEEE 1149.1
电源电压： 3.135 V ~ 3.465 V
安装类型： 表面贴装
封装/外壳： 256-LBGA，CSBGA
供应商设备封装： 256-CSBGA（17x17）
包装： 托盘
DS26334 3.3V, 16-Channel, E1/T1/J1 Short/Long-Haul Line Interface Unit
31 of 121
5.6
Jitter Attenuator
The DS26334 contains an on-board jitter attenuator that can be set to a depth of either 32 or 128 bits via the JADS
bit in register GC. It can also be controlled on an individual LIU basis by settings in the IJAFDS register.
The 128-bit mode is used in applications where large excursions of wander are expected. The 32-bit mode is used
in delay sensitive applications. The characteristics of the attenuation are shown in Figure 5-9. The jitter attenuator
can be placed in either the receive path or the transmit path or none by appropriately setting the JAPS and the JAE
bits in register GC. These selections can be changed on an individual LIU basis by settings in the IJAPS and IJAE.
In order for the jitter attenuator to operate properly, a 2.048MHz clock or multiple thereof, or 1.544MHz clock or
multiple thereof, must be applied at MCLK. ITU-T specification G.703 requires an accuracy of ±50ppm for both T1
and E1 applications. AT&T Pub 62411 and ANSI specs require an accuracy of ±32ppm for T1 interfaces. On-board
circuitry adjusts either the recovered clock from the clock/data recovery block or the clock applied at the TCLK pin
to create a smooth jitter-free clock, which is used to clock data out of the jitter attenuator FIFO. It is acceptable to
provide a jittery clock at the TCLK pin if the jitter attenuator is placed on the transmit side. If the incoming jitter
exceeds either 120UIP-P (buffer depth is 128 bits) or 28UIP-P (buffer depth is 32 bits), the DS26334 will divide the
internal nominal 32.768MHz (E1) or 24.704MHz (T1) clock by either 15 or 17 instead of the normal 16 to keep the
buffer from overflowing. When the device divides by either 15 or 17, it also sets the jitter attenuator limit trip
(IJAFLT) bits in the IJAFLT register described.
Figure 5-9. Jitter Attenuation
FREQUENCY (Hz)
0dB
-20dB
-40dB
-60dB
1
10
100
1K
10K
JITTER
ATTENUAT
ION
(d
B)
100K
TR 62411 (Dec. 90)
Prohibited Area
C
ur
ve
B
C
ur
ve
A
ITU G.7XX
Prohibited Area
TBR12
Prohibited
Area
T1
E1
相关PDF资料
PDF描述
M83723/71W10208 CONN RCPT 2POS WALL MT W/SCKT
VE-B1M-IV-B1 CONVERTER MOD DC/DC 10V 150W
VI-26V-IU-F4 CONVERTER MOD DC/DC 5.8V 200W
VE-21T-IW-B1 CONVERTER MOD DC/DC 6.5V 100W
DS32508N+ IC LIU DS3/E3/STS-1 484-BGA
相关代理商/技术参数
参数描述
DS26334GNA3+ 功能描述:电信集成电路 3.3V E1/T1/J1 16Ch Short/Long Haul LIU RoHS:否 制造商:STMicroelectronics 类型:Telecom IC - Various 工作电源电压:4.75 V to 5.25 V 电源电流: 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-100 封装:Tray
DS26334N 制造商:Maxim Integrated Products 功能描述:DS26334 X16 T1E1J1 LIU L-HAUL IND - Rail/Tube
DS26401 功能描述:网络控制器与处理器 IC Octal T1/E1/J1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS26401+ 功能描述:网络控制器与处理器 IC Octal T1/E1/J1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS26401A2 功能描述:网络控制器与处理器 IC Octal T1/E1/J1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*