参数资料
| 型号： | DS3106DK |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/32页 |
| 文件大小： | 0K |
| 描述： | KIT DEMO FOR DS3106 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 主要目的： | 计时，线路卡 |
| 已用 IC / 零件： | DS3106 |
| 已供物品： | 板，CD |
第1页第2页第3页第4页第5页当前第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
_________________________________________________________________________________________DS3106DK
2.
Basic Hardware Setup
Note: In the following sections, software-related items are identified by bolding. Text in bold refers to items directly
from the demo kit (DK) software. Text in bold and underlined refers to items from the Windows operating system.
The following steps provide a quick start to using the DS3106DK.
1) Place the POWER jumper (JMP5) in the PS position.
2) To communicate with the board using a USB cable:
a) Configure the board for USB communication by placing jumpers to connect the middle and right pins of
JMP62 and JMP63 (i.e., place the jumpers toward the “USB” silkscreen).
b) Connect a USB cable between the USB connector on the DS3106DK and an available USB port on the
host computer.
3) To communicate with the board using a serial (RS232) cable:
a) Configure the board for serial communication by placing jumpers to connect the left and middle pins of
JMP62 and JMP63 (i.e., place the jumpers toward the “RS232” silkscreen).
b) Connect a standard DB-9 serial cable between the serial port connector on the DS3106DK and an
available serial port on the host computer. (Be sure the cable is a standard straight-through cable
rather than a null-modem cable. Null-modem cables prevent proper operation.)
4) Attach the appropriate AC power-supply prongs to the included international power supply.
5) Plug the power supply into an AC power outlet and connect the DC output of the supply to connector J3
(upper-left corner in Figure 1-1 ).
At this point the power indicator LEDs DS1–DS4 should be lit. Microcontroller status LED DS16 (to the right of the
USB connector) should also be lit.
2.1
USB Driver Installation
When the DS3106DK is first connected to the PC using a USB cable, an on-board USB-to-serial converter IC is
automatically detected by Windows and the Found New Hardware Wizard is automatically started. Follow these
steps to install the drivers:
1) In the first screen of this wizard, select Install from a list or specific location and click Next .
2) In the second screen, select Search for the best driver in these locations , check Include this location
in the search , and browse to the USB directory in the DS3106DK CD-ROM or downloaded ZIP file. Click
Next .
3) Click Finished .
4) Repeats steps 1 to 3 the second time the Found New Hardware Wizard starts.
After the drivers are installed, whenever the DS3106DK board is connected to a USB port on the PC, the Windows
operating system will see the USB-to-serial converter IC as an additional COM port. The DS3106DK software will
automatically list the additional COM port in the PORT selection combo box in the upper-left corner of the main
window.
Rev: 012208
6 of 32
相关PDF资料 |
PDF描述 |
|---|---|
| DS3144DK | KIT DEMO FOR DS3144 |
| DS3150DK | KIT DEMO DS3150 DS3/E3/STS-2 LIU |
| DS3153DK | KIT DEMO FOR DS3153 |
| DS3154DK | KIT DEMO FOR DS3154 |
| DS3170DK | KIT DESIGN FOR DS3170 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS3106E12S-3S(621) | 制造商:Amphenol Corporation 功能描述: |
| DS3106F-10SL-3S | 制造商:Amphenol Corporation 功能描述: |
| DS3106F-10SL-4P | 制造商:Amphenol Corporation 功能描述: |
| DS3106F-10SL-4S | 制造商:Amphenol 功能描述:10SL-4 vO Solder 500VDC / 700VAC 13A 125 Silver 制造商:Amphenol 功能描述:10SL-4 vO Solder 500VDC / 700VAC 13A 125 Silver Bulk |
| DS3106F-10SL-4S(621) | 制造商:Amphenol Corporation 功能描述: |
发布紧急采购，3分钟左右您将得到回复。