收藏本站
参数资料
型号： DS3112+
厂商： Maxim Integrated Products
文件页数： 5/133页
文件大小： 0K
描述： IC MUX TEMPE T3/E3 256-BGA
产品培训模块： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装： 40
控制器类型： 调帧器，多路复用器
接口： 并行/串行
电源电压： 3.135 V ~ 3.465 V
电流 - 电源： 150mA
工作温度： 0°C ~ 70°C
安装类型： 表面贴装
封装/外壳： 256-LBGA
供应商设备封装： 256-PBGA（27x27）
包装： 管件
产品目录页面： 1419 (CN2011-ZH PDF)
DS3112
102 of 133
The instruction shifted into the Instruction shift register is latched into the parallel output on the falling
edge of JTCLK as the controller enters this state. Once latched, this instruction becomes the current
instruction. A rising edge on JTCLK with JTMS low will put the controller in the Run-Test-Idle state.
With JTMS high, the controller will enter the Select-DR-Scan state.
11.1.11
Capture-IR
The Capture-IR state is used to load the shift register in the Instruction register with a fixed value. This
value is loaded on the rising edge of JTCLK. If JTMS is high on the rising edge of JTCLK, the controller
will enter the Exit1-IR state. If JTMS is low on the rising edge of JTCLK, the controller will enter the
Shift-IR state.
11.1.12
Shift-IR
In this state, the shift register in the Instruction register is connected between JTDI and JTDO and shifts
data one stage for every rising edge of JTCLK towards the serial output. The parallel register, as well as
all Test registers remain at their previous states. A rising edge on JTCLK with JTMS high will move the
controller to the Exit1-IR state. A rising edge on JTCLK with JTMS low will keep the controller in the
Shift-IR state while moving data one stage through the Instruction shift register.
11.1.13
Exit1-IR
A rising edge on JTCLK with JTMS low will put the controller in the Pause-IR state. If JTMS is high on
the rising edge of JTCLK, the controller will enter the Update-IR state and terminate the scanning
process.
11.1.14
Pause-IR
Shifting of the Instruction register is halted temporarily. With JTMS high, a rising edge on JTCLK will
put the controller in the Exit2-IR state. The controller will remain in the Pause-IR state if JTMS is low
during a rising edge on JTCLK.
11.1.15
Exit2-IR
A rising edge on JTCLK with JTMS high will put the controller in the Update-IR state. The controller
will loop back to the Shift-IR state if JTMS is low during a rising edge of JTCLK in this state.
11.1.16
Update-IR
相关PDF资料
PDF描述
PIC16F1847-E/P MCU 14KB FLASH 1KB RAM 18PDIP
DS21Q43AT+ IC FRAMER E1 QUAD 5V IND 128TQFP
PIC16LF1847-E/P MCU 14KB FLASH 1KB RAM 18PDIP
DS21Q43AT IC FRAMER E1 QUAD 5V IND 128TQFP
DS2143Q IC CONTROLLER E1 5V LP 44-PLCC
相关代理商/技术参数
参数描述
DS3112+ 功能描述:网络控制器与处理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS3112+W 功能描述:网络控制器与处理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS3112D1 功能描述:网络控制器与处理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS3112D1+ 功能描述:网络控制器与处理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS3112DK 功能描述:网络开发工具 DS3112 Dev Kit RoHS:否 制造商:Rabbit Semiconductor 产品:Development Kits 类型:Ethernet to Wi-Fi Bridges 工具用于评估:RCM6600W 数据速率:20 Mbps, 40 Mbps 接口类型:802.11 b/g, Ethernet 工作电源电压:3.3 V
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*