参数资料
型号: DS3112+
厂商: Maxim Integrated Products
文件页数: 82/133页
文件大小: 0K
描述: IC MUX TEMPE T3/E3 256-BGA
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 40
控制器类型: 调帧器,多路复用器
接口: 并行/串行
电源电压: 3.135 V ~ 3.465 V
电流 - 电源: 150mA
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 256-LBGA
供应商设备封装: 256-PBGA(27x27)
包装: 管件
产品目录页面: 1419 (CN2011-ZH PDF)
DS3112
52 of 133
Bits 5 and 6: Frame Bit Error Insert Control Bits 0 and 1 (FBEIC0 and FBEIC1).
FBEIC1
FBEIC0
TYPE OF FRAMING BIT ERROR INSERTED
0
T3 Mode: A single F-bit error
E3 Mode: A single FAS word of 1111000000 is generated instead of the normal FAS
word, which is 1111010000 (i.e., only 1 bit inverted)
0
1
T3 Mode: A single M-bit error
E3 Mode: A single FAS word of 0000101111 is generated instead of the normal FAS
word, which is 1111010000 (i.e., all FAS bits are inverted)
1
0
T3 Mode: Four consecutive F-bit errors (causes the far end to lose synchronization)
E3 Mode: Four consecutive FAS words of 1111000000 are generated instead of the
normal FAS word, which is 1111010000 (i.e., only 1 bit inverted; causes the far end
to lose synchronization)
1
T3 Mode: Three consecutive M-bit errors (causes the far end to lose synchronization)
E3 Mode: Four consecutive FAS words of 0000101111 are generated instead of the
normal FAS word, which is 1111010000 (i.e., all FAS bits are inverted; causes the far
end to lose synchronization)
Bit 7: Manual Error Insert Mode Select (MEIMS). When this bit is set low, the device will insert errors on each
0 to 1 transition of the BPVI, EXZI, T3PBEI, T3CPBEI, or FBEI control bits. When this bit is set high, the device
will insert errors on each 0 to 1 transition of the FTMEI input signal. The appropriate BPVI, EXZI, T3PBEI,
T3CPBEI, or FBEI control bit must be set to one for this to occur. If all of the BPVI, EXZI, T3PBEI, T3CPBEI,
and FBEI control bits are set to zero, no errors are inserted.
0 = use zero to one transition on the BPVI, EXZI, T3PBEI, T3CPBEI, or FBEI control bits to insert errors
1 = use zero to one transition on the FTMEI input signal to insert errors
相关PDF资料
PDF描述
PIC16F1847-E/P MCU 14KB FLASH 1KB RAM 18PDIP
DS21Q43AT+ IC FRAMER E1 QUAD 5V IND 128TQFP
PIC16LF1847-E/P MCU 14KB FLASH 1KB RAM 18PDIP
DS21Q43AT IC FRAMER E1 QUAD 5V IND 128TQFP
DS2143Q IC CONTROLLER E1 5V LP 44-PLCC
相关代理商/技术参数
参数描述
DS3112+ 功能描述:网络控制器与处理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS3112+W 功能描述:网络控制器与处理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS3112D1 功能描述:网络控制器与处理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS3112D1+ 功能描述:网络控制器与处理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS3112DK 功能描述:网络开发工具 DS3112 Dev Kit RoHS:否 制造商:Rabbit Semiconductor 产品:Development Kits 类型:Ethernet to Wi-Fi Bridges 工具用于评估:RCM6600W 数据速率:20 Mbps, 40 Mbps 接口类型:802.11 b/g, Ethernet 工作电源电压:3.3 V