参数资料
型号: DSPB56366AG120
厂商: Freescale Semiconductor
文件页数: 2/110页
文件大小: 0K
描述: IC DSP 24BIT AUD 120MHZ 144-LQFP
产品变化通告: Product Discontinuation 24/Feb/2012
标准包装: 60
系列: DSP56K/Symphony
类型: 音频处理器
接口: 主机接口,I²C,SAI,SPI
时钟速率: 120MHz
非易失内存: ROM(240 kB)
芯片上RAM: 69kB
电压 - 输入/输出: 3.30V
电压 - 核心: 3.30V
工作温度: -40°C ~ 110°C
安装类型: 表面贴装
封装/外壳: 144-LQFP
供应商设备封装: 144-LQFP(20x20)
包装: 托盘
DSP56366 Technical Data, Rev. 3.1
2-6
Freescale Semiconductor
TA
Input
Ignored Input Transfer Acknowledge—If the DSP is the bus master and there is no external
bus activity, or the DSP is not the bus master, the TA input is ignored. The TA
input is a data transfer acknowledge (DTACK) function that can extend an
external bus cycle indefinitely. Any number of wait states (1, 2. . .infinity) may be
added to the wait states inserted by the BCR by keeping TA deasserted. In
typical operation, TA is deasserted at the start of a bus cycle, is asserted to
enable completion of the bus cycle, and is deasserted before the next bus cycle.
The current bus cycle completes one clock period after TA is asserted
synchronous to the internal system clock. The number of wait states is
determined by the TA input or by the bus control register (BCR), whichever is
longer. The BCR can be used to set the minimum number of wait states in
external bus cycles.
In order to use the TA functionality, the BCR must be programmed to at least
one wait state. A zero wait state access cannot be extended by TA deassertion,
otherwise improper operation may result. TA can operate synchronously or
asynchronously, depending on the setting of the TAS bit in the operating mode
register (OMR).
TA functionality may not be used while performing DRAM type accesses,
otherwise improper operation may result.
BR
Output
(deasserted)
Bus Request—BR is an active-low output, never tri-stated. BR is asserted
when the DSP requests bus mastership. BR is deasserted when the DSP no
longer needs the bus. BR may be asserted or deasserted independent of
whether the DSP56366 is a bus master or a bus slave. Bus “parking” allows BR
to be deasserted even though the DSP56366 is the bus master. (See the
description of bus “parking” in the BB signal description.) The bus request hold
(BRH) bit in the BCR allows BR to be asserted under software control even
though the DSP does not need the bus. BR is typically sent to an external bus
arbitrator that controls the priority, parking, and tenure of each master on the
same external bus. BR is only affected by DSP requests for the external bus,
never for the internal bus. During hardware reset, BR is deasserted and the
arbitration is reset to the bus slave state.
Table 2-7 External Bus Control Signals (continued)
Signal Name
Type
State during
Reset
Signal Description
相关PDF资料
PDF描述
DSPB56367AG150 IC DSP 24BIT 150MHZ 144-LQFP
DSPB56371AF180 IC DSP 24BIT 180MHZ 80-LQFP
DSPB56374AEC IC DSP 24BIT 150MHZ 52-LQFP
DSPB56720CAG DSP 24BIT AUD 200MHZ 144-LQFP
DSPB56724AG DSP 24BIT AUD 250MHZ 144-LQFP
相关代理商/技术参数
参数描述
DSPB56366PV120 制造商:Motorola Inc 功能描述: 制造商:Freescale Semiconductor 功能描述:IC 制造商:MOTOROLA 功能描述:
DSPB56367AG150 功能描述:数字信号处理器和控制器 - DSP, DSC 150Mhz/150MIPS RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
DSPB56367PV150 功能描述:数字信号处理器和控制器 - DSP, DSC 150Mhz/ 150MIPS RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
DSPB5636AG120 制造商:Freescale Semiconductor 功能描述:
DSPB56371AF150 功能描述:数字信号处理器和控制器 - DSP, DSC 150 MHZ VERSION DSPB371 RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT