参数资料
型号: M34519M8-XXXFP
元件分类: 微控制器/微处理器
英文描述: 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42
封装: 0.450 INCH, 0.80 MM PITCH, PLASTIC, SSOP-42
文件页数: 103/138页
文件大小: 1146K
代理商: M34519M8-XXXFP
4519 Group
Rev.3.01
2005.06.15
page 65 of 160
REJ03B0007-0301
Fig. 53 State transition
Fig. 54 Set source and clear source of the P flag
Fig. 55 Start condition identified example using the SNZP in-
struction
A
Operation state
Operation source clock:
f(RING)
f(XIN): Stop
Key-on wakeup
POF instruction
execution
E
RAM back-up mode
D
Operation source clock:
f(XIN)
f(RING): Stop
POF instruction
execution
Operation state
Notes 1: Microcomputer starts its operation after counting f(RING) 120 to 144 times.
C
POF instruction
execution
Operation state
Operation source clock:
f(XIN)
f(RING): Operating
B
POF instruction
execution
Operation state
Operation source clock:
f(RING)
f(XIN): Operating
f(RING): stop
f(XIN): stop
MR1
←1
MR1
←0
(Note 5)
(Note 4)
MR0
←1
MR0
←0
RG0
←0
RG0
←1
Reset
(Note 1)
(Note 2)
(Note 3)
However, the selected contents (CMCK, CRCK, CYCK instruction execution state) of f(XIN) oscillation circuit is retained.
5: System returns to state A certainly when returning from the RAM back-up mode.
4: Continuous execution of the EPOF instruction and the POF instruction is required to go into the RAM back-up state.
3: Generate the wait time by software until the oscillation is stabilized, and then, switch the system clock.
MR1 cannot be cleared to “0” when the oscillation circuit is not selected.
Surely, select the f(XIN) oscillation circuit by executing the CMCK, CRCK or CYCK instruction before clearing MR1 to “0”.
The start/stop of oscillation and the operation source is switched by register MR.
instruction (the start of oscillation and the operation source clock is not switched by these instructions).
2: The f(XIN) oscillation circuit (ceramic resonance, RC oscillation or quartz-crystal oscillation) is selected by the CMCK, CRCK or CYCK
S
R
Q
Power down flag P
POF
instruction
Reset input
q Set source
q Clear source
Reset input
EPOF
instruction +
POF instruction
EPOF instruction +
Program start
P = “1”
?
Yes
Warm start
Cold start
No
相关PDF资料
PDF描述
M34519M6-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42
M34553M8H-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP48
M34553M4-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP48
M34553G8HFP 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PQFP48
M34553M4H-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP48
相关代理商/技术参数
参数描述
M34-52 制造商:GAMEWELL-FCI 制造商全称:GAMEWELL-FCI 功能描述:Three-Fold Fire Alarm Boxes and Transmitters
M34524EDFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34524M8-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34524MC-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:4-BIT CISC SINGLE-CHIP MICROCOMPUTER 720 FAMILY / 4500 SERIES
M3452-C09K1 制造商:Bonitron 功能描述:OVERVOLTAGE BRAKING TRANSISTOR