- 您现在的位置：买卖IC网 > PDF目录67761 > M34519M8-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42 PDF资料下载
参数资料
| 型号： | M34519M8-XXXFP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42 |
| 封装： | 0.450 INCH, 0.80 MM PITCH, PLASTIC, SSOP-42 |
| 文件页数： | 128/138页 |
| 文件大小： | 1146K |
| 代理商： | M34519M8-XXXFP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页第117页第118页第119页第120页第121页第122页第123页第124页第125页第126页第127页当前第128页第129页第130页第131页第132页第133页第134页第135页第136页第137页第138页
4519 Group
Rev.3.01
2005.06.15
page 7 of 160
REJ03B0007-0301
CONNECTIONS OF UNUSED PINS
Connection
Open.
Connect to VSS.
Open.
Connect to VSS.
Open.
Connect to VSS.
Open.
Connect to VSS.
Open.
Connect to VSS.
Open.
Connect to VSS.
Open.
Connect to VSS.
Open.
Connect to VSS.
Open.
Connect to Vss.
Open.
Connect to Vss.
Open.
Connect to Vss.
Open.
Connect to Vss.
Open.
Connect to Vss.
Open.
Connect to Vss.
Pin
XIN
XOUT
D0–D5
D6/CNTR0
D7/CNTR1
P00–P03
P10–P13
P20/SCK
P21/SOUT
P22/SIN
P30/INT0
P31/INT1
P32, P33
P40/AIN4–P43/AIN7
P50–P53
P60/AIN0–P63/AIN3
Usage condition
Internal oscillator is selected.
(Note 1)
Internal oscillator is selected.
(Note 1)
RC oscillator is selected.
(Note 2)
External clock input is selected for main clock.
(Note 3)
N-channel open-drain is selected for the output structure.
(Note 4)
CNTR0 input is not selected for timer 1 count source.
N-channel open-drain is selected for the output structure.
(Note 4)
CNTR1 input is not selected for timer 3 count source.
N-channel open-drain is selected for the output structure.
(Note 4)
The key-on wakeup function is not selected.
(Note 6)
N-channel open-drain is selected for the output structure.
(Note 5)
The pull-up function is not selected.
(Note 4)
The key-on wakeup function is not selected.
(Note 6)
The key-on wakeup function is not selected.
(Note 7)
N-channel open-drain is selected for the output structure.
(Note 5)
The pull-up function is not selected.
(Note 4)
The key-on wakeup function is not selected.
(Note 7)
SCK pin is not selected.
SIN pin is not selected.
“0” is set to output latch.
N-channel open-drain is selected for the output structure.
Notes 1: After system is released from reset, the internal oscillation (on-chip oscillator) is selected for system clock (RG0=0, MR0=1).
2: When the CRCK instruction is executed, the RC oscillation circuit becomes valid. Be careful that the swich of system clock is not executed at oscilla-
tion start only by the CRCK instruction execution.
In order to start oscillation, setting the main clock f(XIN) oscillation to be valid (MR1=0) is required. (If necessary, generate the oscillation stabilizing
wait time by software.)
Also, when the main clock (f(XIN)) is selected as system clock, set the main clock f(XIN) oscillation (MR1=0) to be valid, and select main clock f(XIN)
(MR0=0). Be careful that the switch of system clock cannot be executed at the same time when main clock oscillation is started.
3: In order to use the external clock input for the main clock, select the ceramic resonance by executing the CMCK instruction at the beggining of soft-
ware, and then set the main clock (f(XIN)) oscillation to be valid (MR1=0). Until the main clock (f(XIN)) oscillation becomes valid (MR1=0) after ceramic
resonance becomes valid, XIN pin is fixed to “H”. When an external clock is used, insert a 1 k
resistor to XIN pin in series for limits of current.
4: Be sure to select the output structure of ports D0–D5 and the pull-up function of P00–P03 and P10–P13 with every one port. Set the corresponding
bits of registers for each port.
5: Be sure to select the output structure of ports P00–P03 and P10–P13 with every two ports. If only one of the two pins is used, leave another one
open.
6: The key-on wakeup function is selected with every two bits. When only one of key-on wakeup function is used, considering that the value of key-on
wake-up control register K1, set the unused 1-bit to “H” input (turn pull-up transistor ON and open) or “L” input (connect to VSS, or open and set the
output latch to “0”).
7: The key-on wakeup function is selected with every two bits. When one of key-on wakeup function is used, turn pull-up transistor of unused one ON
and open.
(Note when connecting to VSS and VDD)
q Connect the unused pins to VSS and VDD using the thickest wire at the shortest distance against noise.
相关PDF资料 |
PDF描述 |
|---|---|
| M34519M6-XXXFP | 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42 |
| M34553M8H-XXXFP | 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP48 |
| M34553M4-XXXFP | 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP48 |
| M34553G8HFP | 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PQFP48 |
| M34553M4H-XXXFP | 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP48 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M34-52 | 制造商:GAMEWELL-FCI 制造商全称:GAMEWELL-FCI 功能描述:Three-Fold Fire Alarm Boxes and Transmitters |
| M34524EDFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34524M8-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER |
| M34524MC-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:4-BIT CISC SINGLE-CHIP MICROCOMPUTER 720 FAMILY / 4500 SERIES |
| M3452-C09K1 | 制造商:Bonitron 功能描述:OVERVOLTAGE BRAKING TRANSISTOR |
发布紧急采购，3分钟左右您将得到回复。