参数资料
| 型号： | MAX3109ETJ+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 17/66页 |
| 文件大小： | 0K |
| 描述： | SEMICONDUCTOR OTHER |
| 标准包装： | 60 |
| 系列： | * |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页
Dual Serial UART with 128-Word FIFOs
MAX3109
24
Maxim Integrated
Figure 14. Half-Duplex with Echo Suppression
trigger accuracy equation for a single transmitter output.
Calculate the TX_ transmitter output skew using the fol-
lowing equation:
TRIGSKEW
SF
65
t
(UARTCLK)
≤
where (UARTCLK)S is the fractional divider output clock
of the lower/slower baud rate UART, and (UARTCLK)F
is the fractional divider output clock of the higher/faster
baud rate UART.
Auto Transmitter Disable
The MAX3109 allows automatic disabling of the trans-
mitter. Enable auto transmitter disabling functionality by
setting the TxSynch[6]: TxAutoDis bit high. In this mode,
the MAX3109 disables the specified transmitter by set-
ting the MODE1[1]: TxDisabl bit high after it completes
sending all the data in its TxFIFO. New data can then be
loaded into the TxFIFO. A disabled transmitter does not
send out data on the TX_ output when data is present in
its TxFIFO.
To enable transmission after a transmitter has been dis-
abled automatically, either clear the TxAutoDis or toggle
the TxDisabl bit.
Echo Suppression
The MAX3109 can suppress echoed data that is some-
times found in half-duplex communication networks,
such as RS-485 and IrDA. If the transceiver’s receiver is
not turned off while the transceiver is transmitting, cop-
ies (echoes) of the transmitted data are received by the
UART. The MAX3109’s receiver can block the recep-
tion of this echoed data by enabling echo suppression.
Figure 14 shows a typical RS-485 application using the
echo suppression feature. Set the MODE2[7]: EchoSuprs
bit high to enable echo suppression.
The MAX3109 can also block echoes with a long round
trip delay by disabling the transceiver’s receiver with
the RTS_ output while the MAX3109 is transmitting. The
transmitter can be configured to remain enabled after
the end of the transmission for a programmable period
of time called the hold time delay (Figure 15). The hold
time delay is set by the HDplxDelay[3:0]: Holdx bits.
See the HDplxDelay description in the Detailed Register
Descriptions section for more information.
Echo suppression can operate simultaneously with auto
transceiver direction control.
Auto Hardware Flow Control
The MAX3109 is capable of auto hardware (RTS_ and
CTS_) flow control without the need for host proces-
sor intervention. When AutoRTS control is enabled,
the MAX3109 automatically controls the RTS_ hand-
shake without the need for host processor intervention.
AutoCTS flow control separately turns the MAX3109’s
transmitter on and off based on the CTS_ input. AutoRTS
and AutoCTS flow control modes are independently
enabled by the FlowCtrl[1:0] bits.
AutoRTS Control
AutoRTS flow control ensures that the receive FIFO does
not overflow by signaling to the far-end UART to stop
data transmission. The MAX3109 does this automatically
by controlling the RTS_ output. AutoRTS flow control is
enabled by setting the FlowCtrl[0]: AutoRTS bit high.
The HALT and RESUME programmable values deter-
mine the threshold RxFIFO fill levels at which RTS_ is
asserted and deasserted. Set the HALT and RESUME
MAX3109
MAX14840E
TRANSMITTER
TX_
B
A
D
RX_
TxFIFO
RECEIVER
ECHO
SUPPRESSION
RxFIFO
DI
RO
RE
DE
R
RTS_
相关PDF资料 |
PDF描述 |
|---|---|
| MAX310CPE | IC VIDEO MULTIPLEXER 8X1 16DIP |
| MAX3110EENI+G36 | IC UART SPI COMPAT 28-DIP |
| MAX3120CUA+ | IC TXRX INFRARED IRDA 8-UMAX |
| MAX3120EUA | IC TXRX 3V IRDA IR 3V 8-UMAX |
| MAX312ESE | IC SWITCH QUAD SPST 16SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX3109ETJ+ | 功能描述:UART 接口集成电路 Dual Serial UART with 128-Word FIFOs RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| MAX3109ETJ+T | 功能描述:UART 接口集成电路 Dual Serial UART with 128-Word FIFOs RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| MAX310C/D | 功能描述:多路器开关 IC RoHS:否 制造商:Texas Instruments 通道数量:1 开关数量:4 开启电阻（最大值）:7 Ohms 开启时间（最大值）: 关闭时间（最大值）: 传播延迟时间:0.25 ns 工作电源电压:2.3 V to 3.6 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UQFN-16 |
| MAX310CPE | 功能描述:多路器开关 IC RoHS:否 制造商:Texas Instruments 通道数量:1 开关数量:4 开启电阻（最大值）:7 Ohms 开启时间（最大值）: 关闭时间（最大值）: 传播延迟时间:0.25 ns 工作电源电压:2.3 V to 3.6 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UQFN-16 |
| MAX310CPE+ | 功能描述:多路器开关 IC 8:1 Unbuffered RF Video MUX RoHS:否 制造商:Texas Instruments 通道数量:1 开关数量:4 开启电阻（最大值）:7 Ohms 开启时间（最大值）: 关闭时间（最大值）: 传播延迟时间:0.25 ns 工作电源电压:2.3 V to 3.6 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UQFN-16 |
发布紧急采购，3分钟左右您将得到回复。