- 您现在的位置：买卖IC网 > PDF目录2090 > MAX97003EWP+T (Maxim Integrated Products)IC AUDIO SUBSYSTEM LN 20WLP PDF资料下载
参数资料
| 型号： | MAX97003EWP+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 38/48页 |
| 文件大小： | 0K |
| 描述： | IC AUDIO SUBSYSTEM LN 20WLP |
| 标准包装： | 2,500 |
| 类型： | D 类；H 类 |
| 输出类型： | 1-通道（单声道）或 2-通道（立体声） |
| 在某负载时最大输出功率 x 通道数量： | 1W x 2 @ 8 欧姆 |
| 电源电压： | 2.7 V ~ 5.5 V |
| 特点： | 消除爆音，差分输入，关闭 |
| 安装类型： | * |
| 供应商设备封装： | * |
| 封装/外壳： | * |
| 包装： | * |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页当前第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
Maxim Integrated Products 43
MAX97003
High-Efficiency, Low-Noise Audio Subsystem
Read Data Format
Send the slave address with the R/W bit set to 1 to initi-
ate a read operation. The IC acknowledges receipt of its
slave address by pulling SDA low during the ninth SCL
clock pulse. A START command followed by a read com-
mand resets the address pointer to register 0x00.
The first byte transmitted from the IC is the contents of
register 0x00. Transmitted data is valid on the rising
edge of SCL. The address pointer autoincrements after
each read data byte. This autoincrement feature allows
all registers to be read sequentially within one continuous
frame. A STOP condition can be issued after any number
of read data bytes. If a STOP condition is issued followed
by another read operation, the first data byte to be read
are from register 0x00.
The address pointer can be preset to a specific register
before a read command is issued. The master pre-
sets the address pointer by first sending the IC’s slave
address with the R/W bit set to 0 followed by the register
address. A REPEATED START condition is then sent fol-
lowed by the slave address with the R/W bit set to 1. The
IC then transmits the contents of the specified register.
The address pointer autoincrements after transmitting the
first byte.
The master acknowledges receipt of each read byte
during the acknowledge clock pulse. The master must
acknowledge all correctly received bytes except the
last byte. The final byte must be followed by a not
acknowledge from the master and then a STOP condi-
tion. Figure 20 illustrates the frame format for reading
one byte from the IC. Figure 21 illustrates the frame
format for reading multiple bytes from the IC.
Figure 20. Reading One Byte of Data from the IC
Figure 21. Reading n-Bytes of Data from the IC
ACKNOWLEDGE FROM SALVE
1 BYTE
AUTOINCREMENT INTERNAL
REGISTER ADDRESS POINTER
ACKNOWLEDGE FROM SLAVE
A
0
ACKNOWLEDGE FROM SLAVE
R/W
S
R/W
REPEATED START
Sr
1
SLAVE ADDRESS
REGISTER ADDRESS
SLAVE ADDRESS
DATA BYTE
ACKNOWLEDGE FROM SLAVE
1 BYTE
AUTOINCREMENT INTERNAL
REGISTER ADDRESS POINTER
ACKNOWLEDGE FROM SLAVE
NOT ACKNOWLEDGE FROM MASTER
A
P
A
0
ACKNOWLEDGE FROM SLAVE
R/W
S
R/W
REPEATED START
Sr
1
SLAVE ADDRESS
REGISTER ADDRESS
SLAVE ADDRESS
DATA BYTE
相关PDF资料 |
PDF描述 |
|---|---|
| MAX9700AEUB+ | IC AMP AUDIO 1.6W MONO D 10MSOP |
| MAX9701ETG+T | IC AMP AUDIO PWR 2.2W D 24TQFN |
| MAX9702ETI+T | IC AMP AUDIO PWR 1.8W D 28TQFN |
| MAX9704ETJ+ | IC AMP AUDIO PWR 16W STER 32TQFN |
| MAX9705DEBC+T | IC AMP AUDIO PWR 2.3W D 12UCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX9700AEBC | 制造商:Maxim Integrated Products 功能描述:1.2W LOW EMI FILTERLESS CLASS D - Rail/Tube |
| MAX9700AEBC+ | 制造商:Maxim Integrated Products 功能描述:AUD AMP SPKR 1CH MONO 1.6W CLS-D 12UCSP - Rail/Tube |
| MAX9700AEBC+T | 功能描述:音频放大器 1.2W L-EMI Filterles Class D Audio Amp RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| MAX9700AEBC-T | 功能描述:音频放大器 RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
| MAX9700AETB | 制造商:Maxim Integrated Products 功能描述:1.2W, LOW EMI, FILTERLESS, CLASS D AUDIO AMPL - Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。