参数资料
型号: MB90F543GPF-GE1
厂商: FUJITSU LTD
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP100
封装: 14 X 20 MM, 3.35 MM HEIGHT, 0.65 MM PITCH, ROHS COMPLIANT, PLASTIC, QFP-100
文件页数: 43/72页
文件大小: 1798K
代理商: MB90F543GPF-GE1
MB90540G/545G Series
48
DS07-13703-7E
(4) Power On Reset
(MB90543G(S)/547G(S)/548G(S)/F548GL(S): VCC
= 3.5 V to 5.5 V, VSS = AVSS = 0.0 V, TA = 40 °C to + 105 °C)
(Other than MB90543G(S)/547G(S)/548G(S)/F548GL(S):
VCC
= 5.0 V ± 10%, VSS = AVSS = 0.0 V, TA = 40 °C to + 105 °C)
* : VCC must be kept lower than 0.2 V before power-on.
Note :
The above values are used for creating a power-on reset.
Some registers in the device are initialized only upon a power-on reset. To initialize these register, turn on
the power supply using the above values.
Parameter
Symbol
Pin
name
Condition
Value
Units
Remarks
Min
Max
Power on rise time
tR
VCC
0.05
30
ms
*
Power off time
tOFF
VCC
50
ms
Waiting time until power-on
VCC
VSS
3.0 V
tR
tOFF
2.7 V
0.2 V
RAM data being held
It is recommended to keep the
rising speed of the supply voltage
at 50 mV/ms or slower.
Sudden changes in the power supply voltage may cause a power-on reset.
To change the power supply voltage while the device is in operation, it is recommended to
raise the voltage smoothly to suppress fluctuations as shown below.
In this case, change the supply voltage with the PLL clock not used. If the voltage drop is
1 V or fewer per second, however, you can use the PLL clock.
相关PDF资料
PDF描述
MC9S12XF384J0CLMR MICROCONTROLLER, PQFP112
MPC8555ECVTAJE RISC PROCESSOR, PBGA783
MPC8360EVVAGDHA 32-BIT, 400 MHz, RISC PROCESSOR, PBGA740
MB95F263HP-G-SH-SNE2 8-BIT, FLASH, MICROCONTROLLER, PDIP24
MB96F379RWAPMC1-GSE2 16-BIT, FLASH, 80 MHz, MICROCONTROLLER, PQFP144
相关代理商/技术参数
参数描述
MB90F543GPFR-GE1 制造商:FUJITSU 功能描述:
MB90F543GSPFR-GE1 制造商:FUJITSU 功能描述:
MB90F543GSPMCR-GE1 制造商:FUJITSU 功能描述:
MB90F543PFR-GE1 制造商:FUJITSU 功能描述:
MB90F546GPFR-GE1 制造商:FUJITSU 功能描述: