参数资料
型号: MB9AF311MPMC
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 40 MHz, RISC MICROCONTROLLER, PQFP80
封装: 0.50 MM PITCH, PLASTIC, LQFP-80
文件页数: 44/114页
文件大小: 1357K
代理商: MB9AF311MPMC
35
ATmega48PA/88PA/168PA [DATASHEET]
9223F–AVR–04/14
10.
Power Management and Sleep Modes
Sleep modes enable the application to shut down unused modules in the MCU, thereby saving power. The AVR provides
various sleep modes allowing the user to tailor the power consumption to the application’s requirements.
When enabled, the brown-out detector (BOD) actively monitors the power supply voltage during the sleep periods. To further
save power, it is possible to disable the BOD in some sleep modes. See Section 10.2 “BOD Disable(1)” on page 36 for more
details.
10.1
Sleep Modes
Figure 9-1 on page 24 presents the different clock systems in the Atmel ATmega48PA/88PA/168PA, and their distribution.
The figure is helpful in selecting an appropriate sleep mode. Table 10-1 shows the different sleep modes, their wake up
sources BOD disable ability(1).
Note:
1.
BOD disable is only available for ATmega48PA/88PA/168PA.
To enter any of the six sleep modes, the SE bit in SMCR must be written to logic one and a SLEEP instruction must be
executed. The SM2, SM1, and SM0 bits in the SMCR register select which sleep mode (idle, ADC noise reduction, power-
down, power-save, standby, or extended standby) will be activated by the SLEEP instruction. See Table 10-2 on page 39 for
a summary.
If an enabled interrupt occurs while the MCU is in a sleep mode, the MCU wakes up. The MCU is then halted for four cycles
in addition to the start-up time, executes the interrupt routine, and resumes execution from the instruction following SLEEP.
The contents of the register file and SRAM are unaltered when the device wakes up from sleep. If a reset occurs during
sleep mode, the MCU wakes up and executes from the reset vector.
Table 10-1. Active Clock Domains and Wake-up Sources in the Different Sleep Modes.
Active Clock Domains
Oscillators
Wake-up Sources
Sof
tware
B
O
D
Disable
Sleep Mode
cl
k
CP
U
cl
k
FLA
SH
cl
k
IO
cl
k
AD
C
cl
k
AS
Y
Main
Clo
ck
Source
Enabled
T
imer
Oscill
at
or
Enabled
INT1,
INT0
an
d
Pin
Change
TW
IAd
dre
s
Match
Ti
m
er
2
SPM/EEP
ROM
R
ead
y
AD
C
WDT
Oth
e
rI
/O
Idle
X
X(2)
X
ADC Noise
Reduction
X
X(2)
X(3)
X
X(2)
X
Power-down
X(3)
X
Power-save
X
X(2)
X(3)
X
Standby(1)
X
X(3)
X
Extended
Standby
X(2)
X
X(2)
X(3)
X
Note:
1.
Only recommended with external crystal or resonator selected as clock source.
2.
If Timer/Counter2 is running in asynchronous mode.
3.
For INT1 and INT0, only level interrupt.
相关PDF资料
PDF描述
MSP430G2152IRSA16 16-BIT, FLASH, 16 MHz, RISC MICROCONTROLLER, PQCC16
M37704E2EFP 16-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP80
MSM65544-JS 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PQCC68
MSM65516SS 8-BIT, MROM, 10 MHz, MICROCONTROLLER, PDIP64
MSM65P512JS 8-BIT, OTPROM, 10 MHz, MICROCONTROLLER, PQCC44
相关代理商/技术参数
参数描述
MB9AF312KPMC1-G-JNE2 功能描述:ARM? Cortex?-M3 FM3 MB9A310K Microcontroller IC 32-Bit 40MHz 160KB (160K x 8) FLASH 52-LQFP (10x10) 制造商:cypress semiconductor corp 系列:FM3 MB9A310K 包装:托盘 零件状态:有效 核心处理器:ARM? Cortex?-M3 核心尺寸:32-位 速度:40MHz 连接性:CSIO,I2C,LIN,UART/USART,USB 外设:DMA,LVD,POR,PWM,WDT I/O 数:36 程序存储容量:160KB(160K x 8) 程序存储器类型:闪存 EEPROM 容量:- RAM 容量:16K x 8 电压 - 电源(Vcc/Vdd):2.7 V ~ 5.5 V 数据转换器:A/D 8x12b 振荡器类型:内部 工作温度:-40°C ~ 105°C(TA) 封装/外壳:52-LQFP 供应商器件封装:52-LQFP(10x10) 标准包装:160
MB9AF312KPMC-ES-E1 制造商:FUJITSU 功能描述:
MB9AF312KPMC-G-JNE1 制造商:FUJITSU 功能描述:
MB9AF312KPMC-G-JNE2 功能描述:ARM? Cortex?-M3 FM3 MB9A310K Microcontroller IC 32-Bit 40MHz 160KB (160K x 8) FLASH 48-LQFP (7x7) 制造商:cypress semiconductor corp 系列:FM3 MB9A310K 包装:托盘 零件状态:有效 核心处理器:ARM? Cortex?-M3 核心尺寸:32-位 速度:40MHz 连接性:CSIO,I2C,LIN,UART/USART,USB 外设:DMA,LVD,POR,PWM,WDT I/O 数:36 程序存储容量:160KB(160K x 8) 程序存储器类型:闪存 EEPROM 容量:- RAM 容量:16K x 8 电压 - 电源(Vcc/Vdd):2.7 V ~ 5.5 V 数据转换器:A/D 8x12b 振荡器类型:内部 工作温度:-40°C ~ 105°C(TA) 封装/外壳:48-LQFP 供应商器件封装:48-LQFP(7x7) 标准包装:250
MB9AF312KQN-ES-AWE2 制造商:FUJITSU 功能描述: