参数资料
型号: MC13892VLR2
厂商: Freescale Semiconductor
文件页数: 91/158页
文件大小: 0K
描述: IC PMU I.MX51/37/35/27 186MAPBGA
标准包装: 1,000
应用: 电池管理,显示器(LED 驱动器),手持/移动设备,电源
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 186-LFBGA
供应商设备封装: 186-PBGA(12x12)
包装: 带卷 (TR)
FUNCTIONAL DEVICE OPERATION
BATTERY INTERFACE AND CONTROL
BUILDING BLOCKS AND FUNCTIONS
The battery management interface consists of several building blocks and functions as depicted in the block diagram shown
in the previous paragraph. These building blocks and functions are described below while the charger operation is described in
the next section.
CHARGE PATH REGULATOR
The M1 and M2 are permanently used as a combined pass device for a super regulator, with a programmable output voltage
and programmable current limit.
The voltage loop consists of M1, M2, and an amplifier with voltage feedback taken from the BPSNS pin. The value of the sense
resistor is of no influence on the output voltage. The output voltage is programmable by SPI through VCHRG[2:0] bits.
Table 62. Charge Path Regulator Voltage Settings
VCHRG[2:0]
000
001
010
011 (default)
100
101
110
111
Charge Regulator Output Voltage (V)
3.800
4.100
4.150
4.200
4.250
4.300
4.375
4.450
The current loop is composed of the M1 and M2 as control elements, the external sense resistor, a programmable current limit,
and an amplifier. The control loop will regulate the voltage drop over the external resistor. The value of the external resistor
therefore is of influence on the charge current. The charge current is programmable by SPI through ICHRG[3:0] bits. Each setting
corresponds to a common use case. Software controlled pulsed charging can be obtained by programming the current
periodically to zero.
Table 63. Charge Path Regulator Current Limit Settings
ICHRG[3:0] Current Limit (mA)
Charge Regulator
Specific Use Case
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
0.0
80
240
320
400
480
560
640
720
800
880
960
1040
1200
1600
Fully On – M3
Open
Off
Standalone Charging Default for pre-
charging, USB charging, and LPB
Advised setting for USB charging with
PHY active
Standalone Charging Default
High Current Charger
High Current Charger
Externally Powered
MC13892
Analog Integrated Circuit Device Data
Freescale Semiconductor
91
相关PDF资料
PDF描述
RCA18DTMD CONN EDGECARD 36POS R/A .125 SLD
EVAL-ADG2108EBZ BOARD EVAL FOR ADG2108
RCA18DTBN CONN EDGECARD 36POS R/A .125 SLD
RCA18DTBH CONN EDGECARD 36POS R/A .125 SLD
GBM28DCMN CONN EDGECARD 56POS .156 WW
相关代理商/技术参数
参数描述
MC1-38RX 制造商:3M Electronic Products Division 功能描述:NON INSL COPPER SEAMLESS RING TE 制造商:3M Electronic Products Division 功能描述:80610253439 制造商:3M Electronic Products Division 功能描述:80610253439 MC1-38RX S/LOK RING TERMINAL
MC1391 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:TV HORIZONTAL PROCESSOR
MC13917-1900EVK 功能描述:射频开发工具 MC13917_1900_EVK RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
MC13917-350EVK 功能描述:射频开发工具 MC13917_350_EVK RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
MC13917-434EVK 功能描述:射频开发工具 MC13917 EVB 434MHZ RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V