参数资料
型号: MC13892VLR2
厂商: Freescale Semiconductor
文件页数: 92/158页
文件大小: 0K
描述: IC PMU I.MX51/37/35/27 186MAPBGA
标准包装: 1,000
应用: 电池管理,显示器(LED 驱动器),手持/移动设备,电源
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 186-LFBGA
供应商设备封装: 186-PBGA(12x12)
包装: 带卷 (TR)
FUNCTIONAL DEVICE OPERATION
BATTERY INTERFACE AND CONTROL
Table 64. Charge Path Regulator Characteristics
Parameter
Input Operating Voltage
Output voltage trimming accuracy
Condition
CHRGRAW
VCHRG[2:0] = 011
Charge current 50 mA at T = 25 °C
Min
BATTMIN
Typ
Max
5.6
0.35
Units
V
%
Output Voltage Spread
VCHRG[2 :0] = 011, 1xx
Charge current 1.0 to 100 mA
Charge current > 100 mA and above
-1.5
-3.0
1.5
1.5
%
%
Current Limit
Tolerance (77)
ICHRG[3:0] =0 001
ICHRG[3:0] = 0100
ICHRG[3:0] = 0110
All other settings
68
360
500
80
400
560
92
440
620
15
mA
mA
mA
%
Start-up Overshoot
Unloaded
2.0
%
Configuration
Input Capacitance
CHRGRAW (78)
2.2
μ F
Load Capacitor
Cable Length
BPSNS
10
-
4.7
3.0
μ F
m
Notes
77. Excludes spread and tolerances due to board routing and 100 mOhm sense resistor tolerances.
78. An additional derating of 35% is allowed.
79. This condition applies when using an external charger with a 3.0 m long cable.
OVER-VOLTAGE PROTECTION
In order to protect the application, the voltage at the CHRGRAW pin is monitored. When crossing the threshold, the charge
path regulator will be turned off immediately, by opening M1 and M2, while M3 gets closed. When the over-voltage condition
disappears for longer than the debounce time, charging will resume and previously programmed SPI settings will be reloaded.
An interrupt CHGFAULTI is generated with associated CHGFAULTM mask bit with the CHGFAULTS[1:0] bits set to 01.
In order to ensure immediate protection, the control of M1, M2, and M3 occurs real-time, so asynchronously to the charger
state machine. As a result, for over-voltage conditions of up to 30 μ s, the charger state machine may not always end up in the
over-voltage fault state, and therefore an interrupt may not always be generated.
Table 65. Charger Over-voltage Protection Characteristics
Parameter
Over-voltage Comparator High Voltage Threshold
Over-voltage Comparator Debounce Time
Condition
High to Low, Low to High
High to Low
Min
16
Typ
10
Max
20
Units
V
ms
The VBUS pin is also protected against over-voltages. This will occur at much lower levels for CHRGRAW. When a VBUS
over-voltage is detected the internal circuitry of the USB block is disconnected. A USBOVI is generated in this case. For more
details see Connectivity .
When the maximum voltage of the IC is exceeded, damage will occur to the IC and the state of M1 and M2 cannot be
guaranteed. If the user wants to protect against these failure conditions, additional protection will be required.
MC13892
Analog Integrated Circuit Device Data
92
Freescale Semiconductor
相关PDF资料
PDF描述
RCA18DTMD CONN EDGECARD 36POS R/A .125 SLD
EVAL-ADG2108EBZ BOARD EVAL FOR ADG2108
RCA18DTBN CONN EDGECARD 36POS R/A .125 SLD
RCA18DTBH CONN EDGECARD 36POS R/A .125 SLD
GBM28DCMN CONN EDGECARD 56POS .156 WW
相关代理商/技术参数
参数描述
MC1-38RX 制造商:3M Electronic Products Division 功能描述:NON INSL COPPER SEAMLESS RING TE 制造商:3M Electronic Products Division 功能描述:80610253439 制造商:3M Electronic Products Division 功能描述:80610253439 MC1-38RX S/LOK RING TERMINAL
MC1391 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:TV HORIZONTAL PROCESSOR
MC13917-1900EVK 功能描述:射频开发工具 MC13917_1900_EVK RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
MC13917-350EVK 功能描述:射频开发工具 MC13917_350_EVK RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
MC13917-434EVK 功能描述:射频开发工具 MC13917 EVB 434MHZ RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V