- 您现在的位置：买卖IC网 > PDF目录69027 > MC68HC05P9DWR2 (MOTOROLA INC) 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28 PDF资料下载
参数资料
| 型号： | MC68HC05P9DWR2 |
| 厂商： | MOTOROLA INC |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28 |
| 封装： | SOIC-28 |
| 文件页数： | 31/88页 |
| 文件大小： | 6557K |
| 代理商： | MC68HC05P9DWR2 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页当前第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页
4
MOTOROLA
4-4
MC68HC05E0
RESETS, INTERRUPTS AND LOW POWER MODES
Table 4-1 shows the relative priority of all the possible interrupt sources. Internally, the External
Interrupt, Real Time Interrupt, and Wake-up signals are “ORed” to generate the CPU interrupt
signal IRQB. The source responsible for generating the IRQB interrupt can be determined by
examining the interrupt ag bits associated with these sources.
Note:
The external interrupt INTX can be disabled by setting the External Interrupt Mask bit
(INTMX) in the Interrupt Control Register ($000E).
For example, if both an external interrupt and a Timer A interrupt are pending at the end of an
instruction execution, the external interrupt is serviced rst.
The software interrupt SWI is executed in the same way as any other instruction, regardless of the
state of the I-bit.
4.2.1
Hardware Controlled Interrupt Sequence
The following three functions (RESET, STOP, and WAIT) are not in the strictest sense interrupts.
However, they are acted upon in a similar manner. Flowcharts for hardware interrupts are shown
in Figure 4-3, and for STOP and WAIT in Figure 4-4.
RESET:
A reset condition causes the program to vector to its starting address which is specied
by the contents of memory locations $FFFE (MSB) and $FFFF (LSB). The I bit in the
condition code register is also set.
STOP:
The STOP instruction causes the oscillator to be turned off and the processor to “sleep”
until an external interrupt (INTX) (if enabled), a wake-up interrupt (if enabled) or reset
occurs.
WAIT:
The WAIT instruction causes all processor clocks to stop, but leaves the timer clock
running. This “rest” state of the processor can be cleared by reset, an external interrupt
(INTX) (if enabled), a wake-up interrupt or a Timer/SI interrupt. There are no special
wait vectors for these individual interrupts.
Table 4-1 Interrupt Priorities
Source
Vector address
Priority
Real time interrupt
$FFFA, $FFFB
highest
External interrupt (INTX)
Wake-up (Port C)
Timer A
$FFF8, $FFF9
Timer B
$FFF6, $FFF7
Serial interface
$FFF4, $FFF5
lowest
40
相关PDF资料 |
PDF描述 |
|---|---|
| MC68HC05RC18P | 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP28 |
| MC68HC05RC18FN | 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC44 |
| MC68HC05SR3FB | 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PQFP44 |
| MC68HC05SR3CFB | 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PQFP44 |
| MC68HC05T7B | 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP56 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC68HC05P9P | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS MICROCONTROLLER UNIT |
| MC68HC05PV8 | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Techinal Data - rev 1.9 |
| MC68HC05PV8A | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Techinal Data - rev 1.9 |
| MC68HC05RC16 | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:General Release Specification |
| MC68HC05RC16DW | 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:General Release Specification |
发布紧急采购，3分钟左右您将得到回复。