参数资料
型号: NOIL1SE3000A-GDC
厂商: ON Semiconductor
文件页数: 33/57页
文件大小: 0K
描述: IC IMAGE SENSOR 3MP 369-PGA
标准包装: 1
系列: *
象素大小: 8µm x 8µm
有源象素阵列: 1696H x 1710V
每秒帧数: 485
电源电压: 2.5V, 3.3V
类型: CMOS 成像
封装/外壳: *
供应商设备封装: *
包装: *
其它名称: CYIL1SE3000AA-GZDC
CYIL1SE3000AA-GZDC-ND
NOIL1SN3000A
External Trigger
Integration Time
Handling
Readout
Handling
FOT
Reset N
Exposure Time N
Readout N-1
FOT
FOT
Reset N+1
Exposure Time N+1
Readout N
FOT
FOT
ROT
Line Readout
Figure 20. Pipelined Shutter Operated in Slave Mode
Triggered Global Shutter
In this mode, manual intervention is required to control
both the integration time and the start of readout. After the
integration time, indicated by a user controlled pin, the
image core is read out. After this sequence, the sensor goes
to an idle mode until a new user action is detected.
The three main differences from the pipelined shutter
mode are:
? Upon user action, one single image is read.
? Normally, integration and readout are done
sequentially. However, you can control the sensor in
such a way that two consecutive batches are
overlapping, that is, having concurrent integration and
readout.
? You can control integration and readout through an
external pin.
This mode requires manual intervention for every frame.
The pixel array is kept in reset state until requested.
The triggered global mode can also be controlled in a
master or in a slave mode.
No effect on falling edge
External Trigger
Master Mode
As shown in Figure 21, in the master mode, a rising edge
on the synchronization pin is used to trigger the start of
integration and readout. The integration time is defined by
a register setting. The sensor autonomously integrates
during this predefined time, after which the FOT starts and
the image array is read out sequentially. A falling edge on the
synchronization pin does not have any impact on the readout
or integration and subsequent frames are started again for
each rising edge.
Slave Mode
Integration time control is identical to the pipelined
shutter slave mode where both integration time and readout
requests are controlled by an external trigger. An external
synchronization pin controls the start of integration. The
moment it is deasserted, the FOT starts. At this time the
analog value on the pixel diode is transferred to the pixel
memory element and the image readout can start. A request
for a new frame is started when the synchronization pin is
asserted again.
Integration Time
Handling
Reset N
Exposure Time N
FOT
Reset N+1
Exposure Time N+1
FOT
Register Controlled
Readout
Handling
FOT
Readout N-1
FOT
Readout N
FOT
ROT
Line Readout
Figure 21. Triggered Shutter Operated in Master Mode
http://onsemi.com
33
相关PDF资料
PDF描述
NOIL1SM0300A-WWC IC IMAGE SENSOR LUPA300 48LLC
NOIL2SC1300A-GDC IC IMAGE SENSOR LUPA1300 168PGA
NOIV1SE025KA-GDC IC IMAGE SENSOR 25MP 355PGA
NP100P04PDG-E1-AY MOSFET P-CH -40V MP-25ZP/TO-263
NP100P04PLG-E1-AY MOSFET P-CH -40V MP-25ZP/TO-263
相关代理商/技术参数
参数描述
NOIL1SM0300A-QDC 功能描述:IC IMAGE SENSOR LUPA300 48LLC RoHS:是 类别:传感器,转换器 >> 图像,相机 系列:* 标准包装:480 系列:- 象素大小:6.7µm x 6.7µm 有源象素阵列:768H x 488V 每秒帧数:52 电源电压:3.3V 类型:CMOS 成像 封装/外壳:48-QFP 供应商设备封装:48-QFP 包装:托盘 请注意:* 配用:4H2105-ND - HEADBOARD FOR KAC-004014H2104-ND - KIT EVAL FOR KAC-00401 其它名称:4H20954H2095-NDKAC-00401-CBC-LB-A0
NOIL1SM0300A-WWC 功能描述:IC IMAGE SENSOR LUPA300 48LLC RoHS:是 类别:传感器,转换器 >> 图像,相机 系列:LUPA300 标准包装:480 系列:- 象素大小:6.7µm x 6.7µm 有源象素阵列:768H x 488V 每秒帧数:52 电源电压:3.3V 类型:CMOS 成像 封装/外壳:48-QFP 供应商设备封装:48-QFP 包装:托盘 请注意:* 配用:4H2105-ND - HEADBOARD FOR KAC-004014H2104-ND - KIT EVAL FOR KAC-00401 其它名称:4H20954H2095-NDKAC-00401-CBC-LB-A0
NOIL1SM1300AWES 制造商:ON Semiconductor 功能描述:PW/H
NOIL1SM4000A 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:LUPA4000: 4 MegaPixel High Speed CMOS Sensor
NOIL1SM4000A-GDC 功能描述:IC IMAGE SENSOR LUPA4000 127PGA RoHS:是 类别:传感器,转换器 >> 图像,相机 系列:* 标准包装:480 系列:- 象素大小:6.7µm x 6.7µm 有源象素阵列:768H x 488V 每秒帧数:52 电源电压:3.3V 类型:CMOS 成像 封装/外壳:48-QFP 供应商设备封装:48-QFP 包装:托盘 请注意:* 配用:4H2105-ND - HEADBOARD FOR KAC-004014H2104-ND - KIT EVAL FOR KAC-00401 其它名称:4H20954H2095-NDKAC-00401-CBC-LB-A0