参数资料
型号: OM13032,598
厂商: NXP Semiconductors
文件页数: 11/74页
文件大小: 0K
描述: BOARD EVAL LPC11U24
标准包装: 1
类型: MCU
适用于相关产品: LPC11U24
所含物品:
其它名称: 568-8599
LPC11U2X
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2014. All rights reserved.
Product data sheet
Rev. 2.2 — 11 March 2014
19 of 74
NXP Semiconductors
LPC11U2x
32-bit ARM Cortex-M0 microcontroller
The USART uses a fractional baud rate generator. Standard baud rates such as
115200 Bd can be achieved with any crystal frequency above 2 MHz.
7.10.1 Features
Maximum USART data bit rate of 3.125 Mbit/s.
16 byte receive and transmit FIFOs.
Register locations conform to 16C550 industry standard.
Receiver FIFO trigger points at 1 B, 4 B, 8 B, and 14 B.
Built-in fractional baud rate generator covering wide range of baud rates without a
need for external crystals of particular values.
Fractional divider for baud rate control, auto baud capabilities and FIFO control
mechanism that enables software flow control implementation.
Support for RS-485/9-bit mode.
Support for modem control.
Support for synchronous mode.
Includes smart card interface.
7.11 SSP serial I/O controller
The SSP controllers operate on a SSP, 4-wire SSI, or Microwire bus. It can interact with
multiple masters and slaves on the bus. Only a single master and a single slave can
communicate on the bus during a given data transfer. The SSP supports full duplex
transfers, with frames of 4 bit to 16 bit of data flowing from the master to the slave and
from the slave to the master. In practice, often only one of these data flows carries
meaningful data.
7.11.1 Features
Maximum SSP speed of 25 Mbit/s (master) or 4.17 Mbit/s (slave) (in SSP mode)
Compatible with Motorola SPI (Serial Peripheral Interface), 4-wire Texas Instruments
SSI (Serial Synchronous Interface), and National Semiconductor Microwire buses
Synchronous serial communication
Master or slave operation
8-frame FIFOs for both transmit and receive
4-bit to 16-bit frame
7.12 I2C-bus serial I/O controller
The LPC11U2x contain one I2C-bus controller.
The I2C-bus is bidirectional for inter-IC control using only two wires: a Serial CLock line
(SCL) and a Serial DAta line (SDA). Each device is recognized by a unique address and
can operate as either a receiver-only device (e.g., an LCD driver) or a transmitter with the
capability to both receive and send information (such as memory). Transmitters and/or
receivers can operate in either master or slave mode, depending on whether the chip has
to initiate a data transfer or is only addressed. The I2C-bus is a multi-master bus, and
more than one bus master connected to the interface can be controlled the bus.
相关PDF资料
PDF描述
12RS153C INDUCTOR RAD 15UH 4A T/H 10X10
V375C12C75B2 CONVERTER MOD DC/DC 12V 75W
GSM11DSEN-S243 CONN EDGECARD 22POS .156 EYELET
LTC1558CS-3.3#TRPBF IC BACKUP BATT CNTRLR3.3V 16SOIC
V375C12C75B CONVERTER MOD DC/DC 12V 75W
相关代理商/技术参数
参数描述
OM13033 制造商:NXP Semiconductors 功能描述:EVAL ARM NGX LPC11U24 制造商:NXP Semiconductors 功能描述:LPC11U24, NGX, KEIL, EVAL BOARD 制造商:NXP Semiconductors 功能描述:LPC11U24, NGX, KEIL, EVAL BOARD; Silicon Manufacturer:NXP; Core Architecture:ARM; Core Sub-Architecture:Cortex-M0; Silicon Core Number:LPC11xxx; Silicon Family Name:LPC11Uxx; Features:Evaluation Board for LPC11U24 Microcontroller; ;RoHS Compliant: Yes
OM13033,598 功能描述:开发板和工具包 - ARM NGX LPC11U24 Eval Board RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V
OM13033598 制造商:NXP Semiconductors 功能描述:EVAL ARM NGX LPC11U24
OM13034,598 制造商:NXP Semiconductors 功能描述:EVAL, IAR, LPC1347, J-LINK LITE 制造商:NXP Semiconductors 功能描述:EVAL, IAR, LPC1347, J-LINK LITE, Silicon Manufacturer:NXP, Core Architecture:ARM 制造商:NXP Semiconductors 功能描述:EVAL, IAR, LPC1347, J-LINK LITE, Silicon Manufacturer:NXP, Core Architecture:ARM, Core Sub-Architecture:Cortex-M3, Silicon Core Number:LPC1347, Silicon Family Name:LPC1300, Kit Contents:Evaluation Board for LPC1347 , RoHS Compliant: Yes
OM13034598 制造商:NXP Semiconductors 功能描述:EVAL IAR LPC1347 J-LINK LITE