参数资料
型号: OM13032,598
厂商: NXP Semiconductors
文件页数: 9/74页
文件大小: 0K
描述: BOARD EVAL LPC11U24
标准包装: 1
类型: MCU
适用于相关产品: LPC11U24
所含物品:
其它名称: 568-8599
LPC11U2X
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2014. All rights reserved.
Product data sheet
Rev. 2.2 — 11 March 2014
17 of 74
NXP Semiconductors
LPC11U2x
32-bit ARM Cortex-M0 microcontroller
Four programmable interrupt priority levels, with hardware priority level masking.
Software interrupt generation.
7.6.2 Interrupt sources
Each peripheral device has one interrupt line connected to the NVIC but can have several
interrupt flags. Individual interrupt flags can also represent more than one interrupt
source.
7.7 IOCON block
The IOCON block allows selected pins of the microcontroller to have more than one
function. Configuration registers control the multiplexers to allow connection between the
pin and the on-chip peripherals.
Connect peripherals to the appropriate pins before activating the peripheral and before
enabling any related interrupt. Activity of any enabled peripheral function that is not
mapped to a related pin is treated as undefined.
7.7.1 Features
Programmable pull-up, pull-down, or repeater mode.
All GPIO pins (except PIO0_4 and PIO0_5) are pulled up to 3.3 V (VDD = 3.3 V) if their
pull-up resistor is enabled.
Programmable pseudo open-drain mode.
Programmable 10 ns glitch filter on pins PIO0_22, PIO0_23, and PIO0_11 to
PIO0_16. The glitch filter is turned on by default.
Programmable hysteresis.
Programmable input inverter.
7.8 General-Purpose Input/Output GPIO
The GPIO registers control device pin functions that are not connected to a specific
peripheral function. Pins can be dynamically configured as inputs or outputs. Multiple
outputs can be set or cleared in one write operation.
LPC11U2x use accelerated GPIO functions:
GPIO registers are a dedicated AHB peripheral so that the fastest possible I/O timing
can be achieved.
Entire port value can be written in one instruction.
Any GPIO pin providing a digital function can be programmed to generate an interrupt on
a level, a rising or falling edge, or both.
The GPIO block consists of three parts:
1. The GPIO ports.
2. The GPIO pin interrupt block to control eight GPIO pins selected as pin interrupts.
3. Two GPIO group interrupt blocks to control two combined interrupts from all GPIO
pins.
相关PDF资料
PDF描述
12RS153C INDUCTOR RAD 15UH 4A T/H 10X10
V375C12C75B2 CONVERTER MOD DC/DC 12V 75W
GSM11DSEN-S243 CONN EDGECARD 22POS .156 EYELET
LTC1558CS-3.3#TRPBF IC BACKUP BATT CNTRLR3.3V 16SOIC
V375C12C75B CONVERTER MOD DC/DC 12V 75W
相关代理商/技术参数
参数描述
OM13033 制造商:NXP Semiconductors 功能描述:EVAL ARM NGX LPC11U24 制造商:NXP Semiconductors 功能描述:LPC11U24, NGX, KEIL, EVAL BOARD 制造商:NXP Semiconductors 功能描述:LPC11U24, NGX, KEIL, EVAL BOARD; Silicon Manufacturer:NXP; Core Architecture:ARM; Core Sub-Architecture:Cortex-M0; Silicon Core Number:LPC11xxx; Silicon Family Name:LPC11Uxx; Features:Evaluation Board for LPC11U24 Microcontroller; ;RoHS Compliant: Yes
OM13033,598 功能描述:开发板和工具包 - ARM NGX LPC11U24 Eval Board RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V
OM13033598 制造商:NXP Semiconductors 功能描述:EVAL ARM NGX LPC11U24
OM13034,598 制造商:NXP Semiconductors 功能描述:EVAL, IAR, LPC1347, J-LINK LITE 制造商:NXP Semiconductors 功能描述:EVAL, IAR, LPC1347, J-LINK LITE, Silicon Manufacturer:NXP, Core Architecture:ARM 制造商:NXP Semiconductors 功能描述:EVAL, IAR, LPC1347, J-LINK LITE, Silicon Manufacturer:NXP, Core Architecture:ARM, Core Sub-Architecture:Cortex-M3, Silicon Core Number:LPC1347, Silicon Family Name:LPC1300, Kit Contents:Evaluation Board for LPC1347 , RoHS Compliant: Yes
OM13034598 制造商:NXP Semiconductors 功能描述:EVAL IAR LPC1347 J-LINK LITE