参数资料
型号: S1R72105F00A000
元件分类: 总线控制器
英文描述: SCSI BUS CONTROLLER, PQFP100
封装: 0.50 MM PITCH, PLASTIC, QFP15-100
文件页数: 30/99页
文件大小: 666K
代理商: S1R72105F00A000
S1R72105 Technical Manual
30
EPSON
Rev.1.0
7.3.29
SCSI Interrupt Status 1 (SCSIINT1)
R/W
Shows the result of executing the SCSI control command.
The CPU identifies the source of interruption by reading this register after receiving the interrupt signal. It
clears the bit by writing the value read again.
Address
Register Name
Bit Symbol
Description
21h
SCSIINT1
7: SPERR
SCSI DATA PARITY ERROR DETECTED
6: IDERR
ID ERROR DETECTED
5: SELTO
SELECTION TIME OUT
4: SATN
SCSI ATN ASSERTION DETECTED
3: BFREE
BUS FREE DETECTED
2: ILPHS
ILLEGAL PHASE CHANGE DETECTED
1: SCSEL
SCAM SELECTED
0: WOATN
SELECTED WITHOUT ATTENTION
BIT7 SCSI DATA PARITY ERROR DETECTED
This bit becomes HIGH when a parity error is detected on the SCSI data bus.
BIT6 ID ERROR DETECTED
This bit becomes HIGH when an error related to the ID bit is detected during the selection or reselection phase. The
errors related to the ID bit are as described below:
Only one ID bit is asserted, or
Three or more ID bits are asserted.
BIT5 SELECTION TIME OUT
This bit becomes HIGH when time-out is detected during the selection or reselection phase.
BIT4 SCSI ATN ASSERTION DETECTED
This bit becomes HIGH when SCSI ATN is asserted. It is not set, however, in the regular sequence of assertion of
SCSI ATN. In other words, this bit is not set in the message-out phase immediately following selection.
BIT3 BUS FREE DETECTED
This bit becomes HIGH when the bus-free phase is detected during execution of the SCSI control command.
BIT2 ILLEGAL PHASE CHANGE DETECTED
This bit becomes HIGH when unexpected phase transition is detected during execution of the SCSI control command.
It is valid only in Initiator mode.
BIT1 SCAM SELECTED
This bit becomes HIGH when the SCAM selection is responded to.
BIT0 SELECTED WITHOUT ATTENTION
This bit becomes HIGH when the selection, which is not asserted ATTENTION, is responded to.
Execution of the SCSI control command continues, even when this bit is set. If a command block is received
continuously, however, the first byte of SCSI-FIFO has the command code.
相关PDF资料
PDF描述
S1R72803F00A100 1 CHANNEL(S), 400M bps, SERIAL COMM CONTROLLER, PQFP100
S1R72C05B08 UNIVERSAL SERIAL BUS CONTROLLER, PBGA121
S1R72C05B10 UNIVERSAL SERIAL BUS CONTROLLER, PBGA121
S1R72V17B00A UNIVERSAL SERIAL BUS CONTROLLER, PBGA60
S1R72V18B10 UNIVERSAL SERIAL BUS CONTROLLER, PBGA121
相关代理商/技术参数
参数描述
S1R72803F00A200 功能描述:IC LINK CTRLR 1394 IDE-66 184QFP RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
S1R72805F00A2 功能描述:IC LINK CTRLR 1394 IDE100 100QFP RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
S1R72901F00A 功能描述:IC LINK CTRLR/PHY 1394 100-QFP RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
S1R72901F00A200 功能描述:IC PHY CONT 2PORT 1394A 100-QFP RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A
S1R72C05 制造商:EPSON 制造商全称:EPSON 功能描述:Support for control, bulk, interrupt, and isochronous transfers