参数资料
型号: SI5315B-C-GMR
厂商: Silicon Laboratories Inc
文件页数: 33/54页
文件大小: 0K
描述: IC CLOCK MULT 8KHZ-125MHZ 36QFN
应用说明: SI5315/17 Crystal Selection AppNote
标准包装: 250
系列: DSPLL®
类型: 时钟/频率倍增器,抖动衰减器,多路复用器
PLL:
主要目的: 以太网,SONET/SDH/PDH,电信
输入: CML,CMOS,LVDS,LVPECL
输出: CML,CMOS,LVDS,LVPECL
电路数: 1
比率 - 输入:输出: 2:2
差分 - 输入:输出: 是/是
频率 - 最大: 125MHz
电源电压: 1.71 V ~ 3.63 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 36-VFQFN 裸露焊盘
供应商设备封装: 36-QFN(6x6)
包装: 带卷 (TR)
Si5315
Rev. 1.0
39
7.1. Crystal/Reference Clock Selection
The Si5315 requires either a low-jitter external oscillator or a low-cost fundamental mode crystal to be connected to
its XA/XB pins. This serves both as a jitter reference for jitter attenuation and as a reference oscillator for stability
during holdover. The frequency the reference is not directly related to either the input or the output clock
frequencies. The range of the reference frequency is from 37 to 41 MHz. For recommendations on the selection of
the reference frequency and a list of approved crystals, see the application note AN591 which can be downloaded
In holdover, the DSPLL remains locked to this external reference. Any changes in the frequency of this reference
when the DSPLL is in holdover will be tracked by the output of the device. Note that crystals can have temperature
sensitivities. Table 18 shows how the XTAL/CLOCK pin is used to select between a crystal and an external
oscillator.
Because the crystal is used as a jitter reference, rapid changes of the crystal temperature can temporarily disturb
the output phase and frequency. For example, it is recommended that the crystal not be placed close to a fan that
is being turned off and on. If a situation such as this is unavoidable, the crystal should be thermally isolated with an
insulating cover.
7.1.1. Reference Drift
During holdover, long-term and temperature related drift of the reference input result in a one-to-one drift of the
output frequency. That is, the stability of the any-frequency output is identical to the drift of the reference frequency.
This means that for the most demanding applications where the drift of a crystal is not acceptable, an external
temperature compensated or ovenized oscillator will be required. Drift is not an issue unless the part is in holdover.
Also, the initial accuracy of the reference oscillator (or crystal) is not relevant.
Table 18. XA/XB Reference Sources
XTAL/CLOCK
Type
M
37–41 MHz external clock
L
40 MHz crystal
相关PDF资料
PDF描述
VE-B5N-IU CONVERTER MOD DC/DC 18.5V 200W
VI-2NZ-MY-S CONVERTER MOD DC/DC 2V 20W
VE-B5M-IU CONVERTER MOD DC/DC 10V 200W
VI-2NZ-MX-S CONVERTER MOD DC/DC 2V 30W
MC1489AMG IC LINE RECEIVER QUAD 14-SOEIAJ
相关代理商/技术参数
参数描述
SI5315-C 制造商:AUK 制造商全称:AUK corp 功能描述:IRED
SI5315-C(B) 制造商:AUK 制造商全称:AUK corp 功能描述:IRED
SI5315-C_1 制造商:AUK 制造商全称:AUK corp 功能描述:IRED
SI5315-CB 制造商:AUK 制造商全称:AUK corp 功能描述:IRED
SI5315-DS 制造商:AUK 制造商全称:AUK corp 功能描述:High Speed IRED