- 您现在的位置：买卖IC网 > PDF目录299926 > SST26WF032-80-4I-QAE (SILICON STORAGE TECHNOLOGY INC) 32M X 1 SPI BUS SERIAL EEPROM, PDSO8 PDF资料下载
参数资料
| 型号： | SST26WF032-80-4I-QAE |
| 厂商： | SILICON STORAGE TECHNOLOGY INC |
| 元件分类： | PROM |
| 英文描述： | 32M X 1 SPI BUS SERIAL EEPROM, PDSO8 |
| 封装： | 6 X 5 MM, ROHS COMPLIANT, WSON-8 |
| 文件页数： | 34/36页 |
| 文件大小： | 1339K |
| 代理商： | SST26WF032-80-4I-QAE |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页当前第34页第35页第36页
2010 Silicon Storage Technology, Inc.
S71409-01-000
01/10
7
1.8V Serial Quad I/O (SQI) Flash Memory
SST26WF032
Advance Information
Device Protection
The SST26WF032 has a Block-Protection register which provides a software mechanism to write-lock
the array and write-lock, and/or read-lock, the parameter blocks. The Block-Protection Register is 80
bits wide per device: two bits each for the eight 8 KByte parameter blocks (write-lock and read-lock),
and one bit each for the remaining 32 KByte and 64 KByte overlay blocks (write-lock). See Table 8 for
address range protected per register bit.
Each bit in the Block-Protection Register can be written to a ‘1’ (protected) or ‘0’ (unprotected). For the
parameter blocks, the most significant bit is for read-lock, and the least significant bit is for write-lock. Read-
locking the parameter blocks provides additional security for sensitive data after retrieval (e.g., after initial
boot). If a block is read-locked all reads to the block return data 00H. All blocks are write-locked and read-
unlocked after power-up. The Write Block Locking Register command is a two cycle command requiring
Write-Enable (WREN) to be executed prior to the Write Block-Protection Register command.
Figure 6: Block Locking Memory Map
1409 F40.0
Top of Memory Block
8 KByte
32 KByte
64 KByte
32 KByte
8 KByte
Read Lock
Write Lock
Read Lock
Write Lock
Bottom of Memory Block
..
.
相关PDF资料 |
PDF描述 |
|---|---|
| SST48CF048-C1 | 24M X 16 FLASH 3.3V PROM CARD, 100 ns, XMA50 |
| SST49LF008C-33-4C-NHE | 1M X 8 FLASH 3V PROM, 11 ns, PQCC32 |
| SSU-131MAT | SLIDE SWITCH, SP3T, LATCHED, 0.3A, 4VDC, SURFACE MOUNT-RIGHT ANGLE |
| SSU-121ART | SLIDE SWITCH, SPDT, LATCHED, 0.3A, 4VDC, SURFACE MOUNT-RIGHT ANGLE |
| SSW-102-22-F-D-VS | 4 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT, SOCKET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SST26WF032-80-4I-QAE-T | 制造商:Microchip Technology Inc 功能描述:1.65 TO 1.95V 32MBIT SERIAL QUAD I/O FLASH - Tape and Reel |
| SST26WF032-80-4I-S2AE | 功能描述:闪存 1.65 to 1.95V 32Mbit Serial Quad I/O Flsh RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel |
| SST26WF032-80-4I-S2AE-T | 制造商:Microchip Technology Inc 功能描述:1.65 TO 1.95V 32MBIT SERIAL QUAD I/O FLASH - Tape and Reel |
| SST270 | 功能描述:JFET 45V 2mA RoHS:否 制造商:ON Semiconductor 晶体管极性:N-Channel 漏极电流（Vgs=0 时的 Idss）:50 mA 漏源电压 VDS:15 V 闸/源击穿电压: 漏极连续电流:50 mA 配置: 安装风格: 封装 / 箱体:SC-59 封装:Reel |
| SST270-E3 | 功能描述:JFET 45V 2mA RoHS:否 制造商:ON Semiconductor 晶体管极性:N-Channel 漏极电流（Vgs=0 时的 Idss）:50 mA 漏源电压 VDS:15 V 闸/源击穿电压: 漏极连续电流:50 mA 配置: 安装风格: 封装 / 箱体:SC-59 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。