
546
APPENDIX A
DEVELOPMENT TOOLS
User’s Manual U12790EJ2V0UD
A.5.2 When using in-circuit emulator IE-78001-R-A
IE-78001-R-A
In-circuit emulator
IE-70000-98-IF-C
Interface adapter
IE-70000-PC-IF-C
Interface adapter
IE-178098-NS-EM1
Emulation board
IE-78K0-R-EX1
Emulation probe conversion board
EP-78064GF-R
Emulation probe
EV-9200GF-100
Conversion socket
(See Figures A-2
and A-3)
Remark
The EV-9200GF-100 is sold in sets of five units.
This is an in-circuit emulator for debugging the hardware and software when an
application system using the 78K/0 Series is developed. It is used with an
integrated debugger (ID78K0). This emulator is used with an emulation probe and
interface adapter for connecting a host machine.
This adapter is necessary when a PC-9800 series PC (except notebook type) is
used as the host machine for the IE-78001-R-A (C bus compatible).
This adapter is necessary when an IBM PC/AT or compatible machine is used as
the host machine for the IE-78001-R-A (ISA bus compatible).
This board is used with an in-circuit emulator and emulation probe conversion board
to emulate device-specific peripheral hardware.
This board is necessary for using the IE-178098-NS-EM1 on the IE-78001-R-A.
This probe is for an 100-pin plastic QFP (GF-3BA type) and connects an in-circuit
emulator and the target system.
This conversion socket connects the board of a target system created to mount an
100-pin plastic QFP (GF-3BA type) and EP-78064GF-R.