- 您现在的位置：买卖IC网 > PDF目录20043 > W25X10BVZPIG (Winbond Electronics)IC SPI FLASH 1MBIT 8WSON PDF资料下载
参数资料
| 型号： | W25X10BVZPIG |
| 厂商： | Winbond Electronics |
| 文件页数： | 31/51页 |
| 文件大小： | 0K |
| 描述： | IC SPI FLASH 1MBIT 8WSON |
| 标准包装： | 100 |
| 系列： | SpiFlash® |
| 格式 - 存储器： | 闪存 |
| 存储器类型： | FLASH |
| 存储容量： | 1M (128K x 8) |
| 速度： | 104MHz |
| 接口： | SPI 串行 |
| 电源电压： | 2.7 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-WDFN 裸露焊盘 |
| 供应商设备封装： | 8-WSON（6x5） |
| 包装： | 管件 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页当前第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页
W25X10BV/20BV/40BV
9.2.19
Release Power-down / Device ID (ABh)
The Release from Power-down / Device ID instruction is a multi-purpose instruction. It can be used to
release the device from the power-down state, obtain the devices electronic identification (ID) number
or do both.
When used only to release the device from the power-down state, the instruction is issued by driving
the /CS pin low, shifting the instruction code “ABh” and driving /CS high as shown in figure 19. After
the time duration of t RES1 (See AC Characteristics) the device will resume normal operation and other
instructions will be accepted. The /CS pin must remain high during the t RES1 time duration.
When used only to obtain the Device ID while not in the power-down state, the instruction is initiated
by driving the /CS pin low and shifting the instruction code “ABh” followed by 3-dummy bytes. The
Device ID bits are then shifted out on the falling edge of CLK with most significant bit (MSB) first as
shown in figure 19. The Device ID values for the W25X10BV/20BV/40BV are listed in Manufacturer
and Device Identification table. The Device ID can be read continuously. The instruction is completed
by driving /CS high.
When used to release the device from the power-down state and obtain the Device ID, the instruction
is the same as previously described, and shown in figure 20, except that after /CS is driven high it
must remain high for a time duration of t RES2 (See AC Characteristics). After this time duration the
device will resume normal operation and other instructions will be accepted.
If the Release from Power-down / Device ID instruction is issued while an Erase, Program or Write
cycle is in process (when BUSY equals 1) the instruction is ignored and will not have any effects on
the current cycle
Figure 19. Release Power-down Instruction Sequence
Publication Release Date: August 20, 2009
- 31 -
Preliminary -- Revision B
相关PDF资料 |
PDF描述 |
|---|---|
| ISL9011IRKPZ | IC REG LDO 2.85V/1.85V 10-DFN |
| VE-J3X-CX-S | CONVERTER MOD DC/DC 5.2V 75W |
| R0.5Z-0512/H | CONV DC/DC 0.5W 05VIN 12VOUT |
| EBM28DRXH | CONN EDGE DUAL .156 DIP 56POS |
| TAJC476K020RNJ | CAP TANT 47UF 20V 10% 2312 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| W25X10CLSNIG | 制造商:Winbond Electronics Corp 功能描述:Flash Serial-SPI 2.5V/3.3V 1Mbit 128K/64K x 8bit/16bit 8ns 8-Pin SOIC 制造商:Winbond Electronics Corp 功能描述:IC FLASH 1MBIT 104MHZ 8SOIC |
| W25X10CLSNIG TR | 制造商:Winbond Electronics Corp 功能描述:SPIFLASH, 1M-BIT, 4KB UNIFORM 制造商:Winbond Electronics Corp 功能描述:IC MEMORY |
| W25X10CLZPIG | 制造商:Winbond Electronics Corp 功能描述:IC FLASH 1MBIT 104MHZ 8WSON |
| W25X10CLZPIG TR | 制造商:Winbond Electronics Corp 功能描述:IC FLASH 1MBIT 104MHZ 8WSON |
| W25X10L | 制造商:WINBOND 制造商全称:Winbond 功能描述:1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT 2.5V SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI |
发布紧急采购，3分钟左右您将得到回复。