- 您现在的位置：买卖IC网 > PDF目录16433 > XR16V798IQ-0B-EVB (Exar Corporation)EVAL BOARD FOR XR16V798-B 100QFP PDF资料下载
参数资料
| 型号： | XR16V798IQ-0B-EVB |
| 厂商： | Exar Corporation |
| 文件页数： | 19/56页 |
| 文件大小： | 0K |
| 描述： | EVAL BOARD FOR XR16V798-B 100QFP |
| 设计资源： | XR17V798/794 Eval Board Schematic |
| 标准包装： | 1 |
| 系列： | * |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页当前第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页
XR16V798
26
HIGH PERFORMANCE 2.25V TO 3.6V OCTAL UART WITH FRACTIONAL BAUD RATE
REV. 1.0.1
3.1.3
8XMODE [7:0] (default 0x00)
Each bit selects 8X or 16X sampling rate for that UART channel, bit-0 is channel 0. Logic 0 (default) selects
normal 16X sampling with logic one selects 8X sampling rate. Transmit and receive data rates will double by
selecting 8X.
3.1.4
REGA [7:0](default 0x00)
Reserved.
3.1.5
RESET [7:0] (default 0x00)
The 8-bit RESET register provides the software with the ability to reset the UART(s) when there is a need.
Each bit is self-resetting after it is written a logic 1 to perform a reset to that channel. All registers in that
channel will be reset to the default condition, see Table 19 for details. As an example, bit-0 =1 resets UART
channel 0 with bit-7=1 resets channel 7.
3.1.6
SLEEP [7:0] (default 0x00)
The 8-bit Sleep register enables each UART separately to enter Sleep mode. Sleep mode reduces power
consumption when the system needs to put the UART(s) to idle. The UART enters sleep mode when there is
no interrupt pending. When all 8 UARTs are put to sleep, the on-chip oscillator shuts off to further conserve
power. In this case, the octal UART is awaken by any of the UART channel on from a receive data byte or a
change on the serial port. The UART is ready after 32 crystal clocks to ensure full functionality. Also, a special
interrupt is generated with an indication of no pending interrupt. Logic 0 (default) and logic 1 disable and
enable sleep mode respectively.
3.1.7
Device Identification and Revision
There are 2 internal registers that provide device identification and revision, DVID and DREV registers. The 8-
bit content in the DVID register provides device identification. A return value of 0x48 from this register indicates
the device is a XR16V798. The DREV register returns a 8-bit value of 0x01 for revision A, 0x02 for revision B
and so on. This information is very useful to the software driver for identifying which device it is communicating
with and to keep up with revision changes.
Ch-6
Ch-7
Ch-5 Ch-4 Ch-3 Ch-2 Ch-1 Ch-0
8XMODE Register
Individual UART Channel 8X Clock Mode Enable
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
Ch-6
Ch-7
Ch-5 Ch-4 Ch-3 Ch-2 Ch-1 Ch-0
RESET Register
Individual UART Channel Reset Enable
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
Ch-6
Ch-7
Ch-5 Ch-4 Ch-3 Ch-2 Ch-1 Ch-0
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
SLEEP Register
Individual UART Channel Sleep Enable
相关PDF资料 |
PDF描述 |
|---|---|
| XR16V798IQ-0A-EVB | EVAL BOARD FOR XR16V798-A 100QFP |
| XR16V698IQ-0B-EVB | EVAL BOARD FOR XR16V698-B 100QFP |
| XR16V698IQ-0A-EVB | EVAL BOARD FOR XR16V698-A 100QFP |
| KIT33972AEWEVBE | KIT EVALUATION FOR MC33972 |
| EBM31DCMS | CONN EDGECARD 62POS .156 WW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XR16V798IQ-F | 功能描述:UART 接口集成电路 UART RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| XR16V798IQTR-F | 制造商:Exar Corporation 功能描述:UART 8-CH 64Byte FIFO 2.5V/3.3V 100-Pin PQFP T/R |
| XR-1790 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Audio Schematic |
| XR17C152 | 制造商:EXAR 制造商全称:EXAR 功能描述:5V PCI BUS DUAL UART |
| XR17C152CM | 制造商:EXAR 制造商全称:EXAR 功能描述:5V PCI BUS DUAL UART |
发布紧急采购，3分钟左右您将得到回复。