- 您现在的位置：买卖IC网 > PDF目录1980 > AD73322LARUZ-REEL (Analog Devices Inc)IC PROCESSOR FRONTEND DL 28TSSOP PDF资料下载
参数资料
| 型号： | AD73322LARUZ-REEL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 22/43页 |
| 文件大小： | 0K |
| 描述： | IC PROCESSOR FRONTEND DL 28TSSOP |
| 标准包装： | 2,500 |
| 位数： | 16 |
| 通道数： | 4 |
| 功率（瓦特）： | 73mW |
| 电压 - 电源，模拟： | 2.7 V ~ 5.5 V |
| 电压 - 电源，数字： | 2.7 V ~ 5.5 V |
| 封装/外壳： | 28-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 28-TSSOP |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页当前第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页
AD73322
–29–
REV. B
As the AD73322 can be operated at 8 kHz (see Figure 26) or
16 kHz sampling rates, which make it particularly suited for
voiceband processing, it is important to understand the action of
the interpolator’s Sinc3 response. As was the case with the en-
coder section, if the output signal’s frequency response is not
bounded by the Nyquist frequency it may be necessary to perform
some initial digital filtering to eliminate signal energy above
Nyquist to ensure that it is not imaged at the integer multiples
of the sampling frequency. If the user chooses to bypass the
interpolator, perhaps to reduce group delay, images of the origi-
nal signal will be generated at integer intervals of the sampling
frequency. In this case these images must be removed by exter-
nal analog filtering.
FREQUENCY – Hz
0
500
0
–10
dB
–20
–30
–40
–50
–60
1000
1500
2000
2500
3000
3500
4000
–70
–80
–90
–100
Figure 26. FFT (DAC 8 kHz Sampling)
Figure 27 shows the output spectrum of a 1 kHz tone being
generated at an 8 kHz sampling rate with the interpolator
bypassed.
FREQUENCY – Hz
0
0.5
0
dB
–20
1.0
1.5
2.0
2.5
3.0
3.5
–100
–10
–30
–40
–50
–60
–70
–80
–90
104
Figure 27. FFT (DAC 8 kHz Sampling—Interpolator
Bypassed)
Decoder Group Delay
The interpolator roll-off is mainly due to its sinc-cubed function
characteristic, which has an inherent group delay given by the
equation:
Group Delay (Interpolator) = Order
× (L – 1)/2) × T
INT
where:
Order is the interpolator order (= 3),
L is the interpolation factor (= 32 @ 64 kHz, = 64 @ 32 kHz,
= 128 @ 16 kHz, = 256 @ 8 kHz) and
TINT is the interpolation sample interval (= 1/2.048e6)
=> Group Delay (Interpolator @ 64 kHz)
= 3
× (32 – 1)/2 × (1/2.048e6)
= 22.7
s
The analog section has a group delay of approximately 25
s.
On-Chip Filtering
The primary function of the system filtering’s sinc-cubed (Sinc3)
response is to eliminate aliases or images of the ADCs or DAC’s
resampling, respectively. Both modulators are sampled at a
nominal rate of DMCLK/8 (which is 2.048 MHz for a DMCLK
of 16.384 MHz) and the simple, external RC antialias filter is
sufficient to provide the required stopband rejection above the
Nyquist frequency for this sample rate. In the case of the ADC
section, the decimating filter is required to both decrease sample
rate and increase sample resolution. The process of changing
sample rate (resampling) leads to aliases of the original sampled
waveform appearing at integer multiples of the new sample rate.
These aliases would get mapped into the required signal pass-
band without the application of some further antialias filtering.
In the AD73322, the sinc-cubed response of the decimating
filter creates spectral nulls at integer multiples of the new sample
rate. These nulls coincide with the aliases of the original wave-
form which were created by the down-sampling process, there-
fore reducing or eliminating the aliasing due to sample rate
reduction.
In the DAC section, increasing the sampling rate by interpola-
tion creates images of the original waveform at intervals of the
original sampling frequency. These images may be sufficiently
rejected by external circuitry but the sinc-cubed filter in the
interpolator again nulls the output spectrum at integer intervals
of the original sampling rate which corresponds with the images
due to the interpolation process.
The spectral response of a sinc-cubed filter shows the character-
istic nulls at integer intervals of the sampling frequency. Its
passband characteristic (up to Nyquist frequency) features a
roll-off that continues up to the sampling frequency, where the
first null occurs. In many applications this smooth response will
not give sufficient attenuation of frequencies outside the band of
interest therefore it may be necessary to implement a final filter
in the DSP which will equalize the passband rolloff and provide
a sharper transition band and greater stopband attenuation.
相关PDF资料 |
PDF描述 |
|---|---|
| AD73322LYRZ | IC ANALOG FRONT END DUAL 28-SOIC |
| AD73360ARZ | IC PROCESSOR FRONTEND 6CH 28SOIC |
| AD7352YRUZ-500RL7 | IC ADC DUAL 12BIT 3MSPS 16TSSOP |
| AD7356YRUZ-500RL7 | IC ADC DUAL 12BIT 5MSPS 16TSSOP |
| AD7357YRUZ | IC ADC DUAL14BIT 4.2MSPS 16TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD73322LARZ | 功能描述:IC ANALOG FRONT END DUAL 28-SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模拟前端 (AFE) 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 位数:- 通道数:2 功率（瓦特）:- 电压 - 电源，模拟:3 V ~ 3.6 V 电压 - 电源，数字:3 V ~ 3.6 V 封装/外壳:32-VFQFN 裸露焊盘 供应商设备封装:32-QFN（5x5） 包装:带卷 (TR) |
| AD73322LARZ-REEL | 制造商:Analog Devices 功能描述:DUAL-CHANNEL, 3 V FRONT-END PROCESSOR FOR GENERAL PURPOSE - Tape and Reel |
| AD73322LAST | 制造商:Rochester Electronics LLC 功能描述:SPEECH AND TELEPHONY CODEC I.C. - Tape and Reel 制造商:Analog Devices 功能描述: |
| AD73322LAST-REEL | 制造商:Analog Devices 功能描述:Audio Codec 2ADC / 2DAC 16-Bit 44-Pin LQFP T/R 制造商:Rochester Electronics LLC 功能描述:SPEECH AND TELEPHONY CODEC I.C. - Tape and Reel |
| AD73322LASTZ | 制造商:Analog Devices 功能描述: 制造商:Rochester Electronics LLC 功能描述: |
发布紧急采购，3分钟左右您将得到回复。