参数资料
| 型号： | AD9146BCPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 26/56页 |
| 文件大小： | 0K |
| 描述： | IC DAC 16BIT SRL DUAL 48LFCSP |
| 标准包装： | 1 |
| 系列： | TxDAC+® |
| 设置时间： | 20ns |
| 位数： | 16 |
| 数据接口： | 串行 |
| 转换器数目： | 2 |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-WFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 48-LFCSP-WQ（7x7） |
| 包装： | 托盘 |
| 输出数目和类型： | 2 电流，单极 |
| 采样率（每秒）： | 1.23G |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页当前第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页
AD9146
Data Sheet
Rev. A | Page 32 of 56
DIGITAL DATAPATH
The block diagram in Figure 39 shows the functionality of the
digital datapath. The digital processing includes a premodula-
tion block, two half-band (HB) interpolation filters, phase and
offset adjustment blocks, and an inverse sinc filter.
PREMOD
PHASE
AND
OFFSET
ADJUSTMENT
HB1
HB2
SINC–1
09691-
103
Figure 39. Block Diagram of Digital Datapath
The digital datapath accepts I and Q data streams and processes
them as a quadrature data stream. The signal processing blocks can
be used when the input data stream is represented as complex data.
The digital datapath can also be used to process an input data
stream representing two independent real data streams, but the
functionality is somewhat restricted. The premodulation block
and any of the nonshifted interpolation filter modes can be used
for an input data stream representing two independent real data
streams. See the Coarse Modulation Mixing Sequences section
for more information.
PREMODULATION
The half-band interpolation filters have selectable pass bands
that allow the center frequencies to be moved in increments of
one-half their input data rate. The premodulation block provides
a digital upconversion of the incoming waveform by one-half the
incoming data rate, fDATA. This can be used to frequency-shift base-
band input data to the center of the interpolation filter pass band.
INTERPOLATION FILTERS
The transmit path contains two interpolation filters. Both inter-
polation filters provide a 2× increase in output data rate. The
half-band (HB) filters can be individually bypassed or cascaded
to provide 1×, 2×, or 4× interpolation ratios. Each half-band
filter stage offers a different combination of bandwidths and
operating modes.
The bandwidth of the two half-band filters with respect to the
data rate at the filter input is as follows:
Bandwidth of HB1 = 0.8 × fIN1
Bandwidth of HB2 = 0.5 × fIN2
The usable bandwidth is defined as the frequency over which
the filters have a pass-band ripple of less than ±0.001 dB and
an image rejection of greater than +85 dB. As described in the
Half-Band Filter 1 (HB1) section, the image rejection usually
sets the usable bandwidth of the filter, not the pass-band
flatness.
The half-band filters operate in several modes, providing
programmable pass-band center frequencies as well as signal
modulation. The HB1 filter has four modes of operation, and
the HB2 filter has eight modes of operation.
Half-Band Filter 1 (HB1)
HB1 has four modes of operation, as shown in Figure 40. The
shape of the filter response is identical in each of the four modes.
The four modes are distinguished by two factors: the filter center
frequency and whether the input signal is modulated by the
filter.
0
–20
–40
–60
–80
–100
0
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
M
AG
NI
T
UDE
(
d
B)
FREQUENCY (×
fIN1) (Hz)
MODE 0
MODE 1
MODE 3
MODE 2
09691-
045
Figure 40. HB1 Filter Modes
As shown in Figure 40, the center frequency in each mode is
offset by one-half the input data rate (fIN1) of the filter. Mode 0
and Mode 1 do not modulate the input signal. Mode 2 and
Mode 3 modulate the input signal by fIN1. When operating in
Mode 0 and Mode 2, the I and Q paths operate independently
and no mixing of the data between channels occurs. When oper-
ating in Mode 1 and Mode 3, mixing of the data between the
I and Q paths occurs; therefore, the data input into the filter is
assumed to be complex. Table 15 summarizes the HB1 modes.
Table 15. HB1 Filter Modes
Mode
fCENTER
fMOD
Input Data
0
DC
None
Real or complex
1
fIN/2
None
Complex
2
fIN
Real or complex
3
3fIN/2
fIN
Complex
相关PDF资料 |
PDF描述 |
|---|---|
| GTC02R-36-5P | CONN RCPT 4POS BOX MNT W/PINS |
| VE-2TY-MX-F2 | CONVERTER MOD DC/DC 3.3V 49.5W |
| MS27508E24B4PC | CONN RCPT 56POS BOX MNT W/PINS |
| VE-2TY-MW-F2 | CONVERTER MOD DC/DC 3.3V 66W |
| MS27508E24B4PB | CONN RCPT 56POS BOX MNT W/PINS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD9146BCPZRL | 功能描述:IC DAC 16BIT SRL DUAL 48LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:TxDAC+® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1,000 系列:- 设置时间:1µs 位数:8 数据接口:串行 转换器数目:8 电压电源:双 ± 功率耗散（最大）:941mW 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC W 包装:带卷 (TR) 输出数目和类型:8 电压，单极 采样率（每秒）:* |
| AD9146-EBZ | 制造商:Analog Devices 功能描述:16 BIT DUAL SIGNAL PROC DAC EB - Boxed Product (Development Kits) |
| AD9146-M5375-EBZ | 功能描述:BOARD EVAL FOR AD9146 DAC RoHS:是 类别:编程器，开发系统 >> 评估板 - 数模转换器 (DAC) 系列:TxDAC+® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- DAC 的数量:4 位数:12 采样率（每秒）:- 数据接口:串行，SPI? 设置时间:3µs DAC 型:电流/电压 工作温度:-40°C ~ 85°C 已供物品:板 已用 IC / 零件:MAX5581 |
| AD9148 | 制造商:AD 制造商全称:Analog Devices 功能描述:Quad 16-Bit,1 GSPS, TxDAC+ Digital-to-Analog Converter |
| AD9148ARUZ | 制造商:Analog Devices 功能描述:- Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。