- 您现在的位置：买卖IC网 > PDF目录2063 > ADAU1461WBCPZ-R7 (Analog Devices Inc)IC SIGMADSP 24BIT 96KHZ PLL 32 PDF资料下载
参数资料
| 型号： | ADAU1461WBCPZ-R7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 41/88页 |
| 文件大小： | 0K |
| 描述： | IC SIGMADSP 24BIT 96KHZ PLL 32 |
| 标准包装： | 1,500 |
| 系列： | SigmaDSP® |
| 类型： | 音频处理器 |
| 应用： | 车载音频 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 32-LFCSP-VQ |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页当前第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页
ADAU1461
Rev. 0 | Page 46 of 88
Table 26. Parameter RAM Read/Write Format (Single Address)
Byte 0
Byte 1
Byte 2
Byte 3
Bytes[4:6]
chip_adr[6:0], R/W
param_adr[15:8]
param_adr[7:0]
0000, param[27:24]
param[23:0]
Table 27. Parameter RAM Block Read/Write Format (Burst Mode)
Byte 0
Byte 1
Byte 2
Byte 3
Bytes[4:6]
Bytes[7:10]
Bytes[11:14]
chip_adr[6:0], R/W
param_adr[15:8]
param_adr[7:0]
0000, param[27:24]
param[23:0]
<—param_adr—>
param_adr + 1
param_adr + 2
Table 28. Program RAM Read/Write Format (Single Address)
Byte 0
Byte 1
Byte 2
Bytes[3:7]
chip_adr[6:0], R/W
prog_adr[15:8]
prog_adr[7:0]
prog[39:0]
Table 29. Program RAM Block Read/Write Format (Burst Mode)
Byte 0
Byte 1
Byte 2
Bytes[3:7]
Bytes[8:12]
Bytes[13:17]
chip_adr[6:0], R/W
prog_adr[15:8]
prog_adr[7:0]
prog[39:0]
<—prog_adr—>
prog_adr + 1
prog_adr + 2
SOFTWARE SAFELOAD
To update parameters in real time while avoiding pop and click
noises on the output, the ADAU1461 uses a software safeload
mechanism. The software safeload mechanism enables the
SigmaDSP core to load new parameters into RAM while guar-
anteeing that the parameters are not in use. This prevents an
undesirable condition where an instruction could execute with
a mix of old and new parameters.
SigmaStudio sets up the necessary code and parameters auto-
matically for new projects. The safeload code, along with other
initialization code, fills the first 39 locations in program RAM.
The first eight parameter RAM locations (Address 0x0000 to
Address 0x0007) are configured by default in SigmaStudio as
described in Table 30.
Table 30. Software Safeload Parameter RAM Defaults
Address (Hex)
Function
0x0000
Modulo RAM size
0x0001
Safeload Data 1
0x0002
Safeload Data 2
0x0003
Safeload Data 3
0x0004
Safeload Data 4
0x0005
Safeload Data 5
0x0006
Safeload target address (offset of 1)
0x0007
Number of words to write/safeload trigger
Address 0x0000, which controls the modulo RAM size, is set
by SigmaStudio and is based on the dynamic address generator
mode of the project.
Parameter RAM Address 0x0001 to Address 0x0005 are the five
data slots for storing the data to be safeloaded. The safeload
parameter space contains five data slots by default because most
standard signal processing algorithms have five parameters or less.
Address 0x0006 is the target address in parameter RAM (with
an offset of 1). This designates the first address to be written.
If more than one word is written, the address increments auto-
matically for each data-word. Up to five sequential parameter
RAM locations can be updated with safeload during each audio
frame. The target address offset of 1 is used because the write
address is calculated relative to the address of the data, which
starts at Address 0x0001. Therefore, to update a parameter at
Address 0x000A, the target address is 0x0009.
Address 0x0007 designates the number of words to be written
into the parameter RAM during the safeload. A biquad filter
uses all five safeload data addresses. A simple mono gain cell
uses only one safeload data address. Writing to Address 0x0007
also triggers the safeload write to occur in the next audio frame.
The safeload mechanism is software based and executes once
per audio frame. Therefore, system designers must take care
when designing the communication protocol. A delay equal to
or greater than the sampling period (the inverse of sampling
frequency) is required between each safeload write. A sample
rate of 48 kHz equates to a delay of at least 21 μs. If this delay
is not observed, the downloaded data is corrupted.
相关PDF资料 |
PDF描述 |
|---|---|
| ADAU1513ACPZ-RL7 | IC AMP AUDIO PWR 23W 48LFCSP |
| ADAU1590ACPZ-RL7 | IC AMP AUDIO PWR 48LFCSP |
| ADAU1592ACPZ | IC AMP AUDIO PWR 24W 48LFCSP |
| ADAU1701JSTZ-RL | IC AUDIO PROC 2ADC/4DAC 48-LQFP |
| ADAU1702JSTZ-RL | IC AUDIO PROC 2ADC/4DAC 48-LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADAU1461WBCPZ-RL | 功能描述:IC SIGMADSP 24BIT 96KHZ PLL 32 RoHS:是 类别:集成电路 (IC) >> 线性 - 音频处理 系列:SigmaDSP® 其它有关文件:STA321 View All Specifications 标准包装:1 系列:Sound Terminal™ 类型:音频处理器 应用:数字音频 安装类型:表面贴装 封装/外壳:64-LQFP 裸露焊盘 供应商设备封装:64-LQFP EP（10x10） 包装:Digi-Reel® 其它名称:497-11050-6 |
| ADAU1462WBCPZ150 | 功能描述:32BIT SIGMADSP AUDIO 16K/48K 制造商:analog devices inc. 系列:* 包装:管件 零件状态:在售 安装类型:表面贴装 封装/外壳:72-VFQFN 裸露焊盘，CSP 供应商器件封装:72-LFCSP（10x10） 标准包装:1 |
| ADAU1462WBCPZ150RL | 功能描述:32BIT SIGMADSP AUDIO 16K/48K 制造商:analog devices inc. 系列:* 包装:带卷（TR） 零件状态:在售 安装类型:表面贴装 封装/外壳:72-VFQFN 裸露焊盘，CSP 供应商器件封装:72-LFCSP（10x10） 标准包装:2,000 |
| ADAU1462WBCPZ300 | 功能描述:32BIT SIGMADSP AUDIO 16K/48K 制造商:analog devices inc. 系列:* 包装:管件 零件状态:在售 安装类型:表面贴装 封装/外壳:72-VFQFN 裸露焊盘，CSP 供应商器件封装:72-LFCSP（10x10） 标准包装:1 |
| ADAU1462WBCPZ300RL | 功能描述:32BIT SIGMADSP AUDIO 16K/48K 制造商:analog devices inc. 系列:* 包装:带卷（TR） 零件状态:在售 安装类型:表面贴装 封装/外壳:72-VFQFN 裸露焊盘，CSP 供应商器件封装:72-LFCSP（10x10） 标准包装:2,000 |
发布紧急采购，3分钟左右您将得到回复。