- 您现在的位置：买卖IC网 > PDF目录1915 > DS26900LN+ (Maxim Integrated Products)IC JTAG MUX/SWITCH 144-LQFP PDF资料下载
参数资料
| 型号： | DS26900LN+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 35/49页 |
| 文件大小： | 0K |
| 描述： | IC JTAG MUX/SWITCH 144-LQFP |
| 标准包装： | 90 |
| 系列： | * |
| 功能： | * |
| 电压电源： | 单电源 |
| 电压 - 电源，单路/双路(±)： | 3.14 V ~ 3.47 V |
| 电流 - 电源： | * |
| 工作温度： | * |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 144-LQFP |
| 供应商设备封装： | 144-LQFP（20x20） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页当前第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页
__________________________________________________________________________________________DS26900
40
remains at its current value. On the rising edge of PTCLK, the controller goes to the Shift-DR state if PTMS is low
or it to the Exit1-DR state if PTMS is high.
Shift-DR. The test data register selected by the current instruction is connected between PTDI and PTDO and
shifts data one stage towards its serial output on each rising edge of PTCLK. If a test register selected by the
current instruction is not placed in the serial path, it maintains its previous state.
Exit1-DR. While in this state, a rising edge on PTCLK with PTMS high puts the controller in the Update-DR state,
which terminates the scanning process. A rising edge on PTCLK with PTMS low puts the controller in the Pause-
DR state.
Pause-DR. Shifting of the test registers is halted while in this state. All test registers selected by the current
instruction retain their previous state. The controller remains in this state while PTMS is low. A rising edge on
PTCLK with PTMS high puts the controller in the Exit2-DR state.
Exit2-DR. While in this state, a rising edge on PTCLK with PTMS high puts the controller in the Update-DR state
and terminates the scanning process. A rising edge on PTCLK with PTMS low puts the controller in the Shift-DR
state.
Update-DR. A falling edge on PTCLK while in the Update-DR state latches the data from the shift register path of
the Test registers into the data output latches. This prevents changes at the parallel output due to changes in the
shift register. A rising edge on PTCLK with PTMS low puts the controller in the Run-Test-Idle state. With PTMS
high, the controller enters the Select-DR-Scan state.
Select-IR-Scan. All test registers retain their previous state. The instruction register remains unchanged during this
state. With PTMS low, a rising edge on PTCLK moves the controller into the Capture-IR state and initiates a scan
sequence for the Instruction register. PTMS high during a rising edge on PTCLK puts the controller back into the
Test-Logic-Reset state.
Capture-IR. The Capture-IR state is used to load the shift register in the Instruction register with a fixed value. This
value is loaded on the rising edge of PTCLK. If PTMS is high on the rising edge of PTCLK, the controller enters the
Exit1-IR state. If PTMS is low on the rising edge of PTCLK, the controller enters the Shift-IR state.
Shift-IR. In this state, the shift register in the instruction register is connected between PTDI and PTDO and shifts
data one stage for every rising edge of PTCLK towards the serial output. The parallel register, as well as all test
registers, remains at its previous states. A rising edge on PTCLK with PTMS high moves the controller to the Exit1-
IR state. A rising edge on PTCLK with PTMS low keeps the controller in the Shift-IR state while moving data one
stage through the Instruction shift register.
Exit1-IR. A rising edge on PTCLK with PTMS low puts the controller in the Pause-IR state. If PTMS is high on the
rising edge of PTCLK, the controller enters the Update-IR state and terminates the scanning process.
Pause-IR. Shifting of the Instruction register is halted temporarily. With PTMS high, a rising edge on PTCLK puts
the controller in the Exit2-IR state. The controller remains in the Pause-IR state if PTMS is low during a rising edge
on PTCLK.
Exit2-IR. A rising edge on PTCLK with PTMS high put the controller in the Update-IR state. The controller loops
back to the Shift-IR state if PTMS is low during a rising edge of PTCLK in this state.
Update-IR. The instruction shifted into the instruction shift register is latched into the parallel output on the falling
edge of PTCLK as the controller enters this state. Once latched, this instruction becomes the current instruction. A
rising edge on PTCLK with PTMS low, puts the controller in the Run-Test-Idle state. With PTMS high, the controller
enters the Select-DR-Scan state.
相关PDF资料 |
PDF描述 |
|---|---|
| DS275E/T&R | IC TXRX LINE-PWR RS232 14-TSSOP |
| DS276S | IC TXRX LOW POWER RS-232 8-SOIC |
| DS2890P-000+T&R | IC POT DIGITAL 1-WIRE 100K 6TSOC |
| DS28CM00R-A00+T | IC SILICON SERIAL NUMBER SOT23-5 |
| DS30EA101SQE/NOPB | IC CABLE EQUALIZER 16LLP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS26900LN+ | 功能描述:多路器开关 IC JTAG MUX RoHS:否 制造商:Texas Instruments 通道数量:1 开关数量:4 开启电阻（最大值）:7 Ohms 开启时间（最大值）: 关闭时间（最大值）: 传播延迟时间:0.25 ns 工作电源电压:2.3 V to 3.6 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UQFN-16 |
| DS26900N+ | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:JTAG Multiplexer/Switch |
| DS26C31 | 制造商:NSC 制造商全称:National Semiconductor 功能描述:CMOS QUAD TRI-STATE DIFFERENTIAL LINE DRIVER |
| DS26C31 DIE | 制造商:Texas Instruments 功能描述: |
| DS26C31_BBA3026X WAF | 制造商:Texas Instruments 功能描述: |
发布紧急采购，3分钟左右您将得到回复。