参数资料
型号: IDT82V2042EPFG
厂商: IDT, Integrated Device Technology Inc
文件页数: 5/83页
文件大小: 0K
描述: IC LIU T1/J1/E1 2CH SHORT 80TQFP
标准包装: 45
类型: 线路接口装置(LIU)
规程: E1
电源电压: 3.13 V ~ 3.47 V
安装类型: 表面贴装
封装/外壳: 80-LQFP
供应商设备封装: 80-TQFP(14x14)
包装: 托盘
其它名称: 82V2042EPFG
IDT82V2042E
DUAL CHANNEL T1/E1/J1 SHORT HAUL LINE INTERFACE UNIT
PIN DESCRIPTION
13
December 12, 2005
SCLK
PATT11
I
46
SCLK: Shift Clock
In serial microcontroller interface mode, this signal is the shift clock for the serial interface. Configuration data on SDI pin is
sampled on the rising edge of SCLK. Configuration and status data on SDO pin is clocked out of the device on the rising edge
of SCLK if SCLKE pin is low, or on the falling edge of SCLK if SCLKE pin is high.
In parallel non-multiplexed interface mode, this pin should be connected to ground.
PATT11/PATT10: Transmit pattern select for channel 1
In hardware control mode, this pin selects the transmit pattern
00 = normal
01= All Ones
10= PRBS
11= transmitter power down
SCLKE
DS
RD
PATT10
I
45
SCLKE: Serial Clock Edge Select
In serial microcontroller interface mode, this signal selects the active edge of SCLK for outputting SDO. The output data is
valid after some delay from the active clock edge. It can be sampled on the opposite edge of the clock. The active clock edge
which clocks the data out of the device is selected as shown below:
DS: Data Strobe
In Motorola parallel non-multiplexed interface mode, this signal is the data strobe of the parallel interface. In a write operation
(R/W = 0), the data on D[7:0] is sampled into the device. In a read operation (R/W = 1), the data is driven to D[7:0] by the
device.
RD: Read Strobe
In Intel parallel non-Multiplexed interface mode, the data is driven to D[7:0] by the device during low level of RD in a read oper-
ation.
PATT11/PATT10: Transmit pattern select for channel 1
See above PATT11.
SDI
R/W
WR
LP21
I
44
SDI: Serial Data Input
In serial microcontroller interface mode, this signal is the input data to the serial interface. Configuration data at SDI pin is sam-
pled by the device on the rising edge of SCLK.
R/W: Read/Write Select
In Motorola parallel non-multiplexed interface mode, this pin is low for write operation and high for read operation.
WR: Write Strobe
In Intel parallel non-multiplexed interface mode, this pin is asserted low by the microcontroller to initiate a write cycle. The data
on D[7:0] is sampled into the device in a write operation.
LP21/LP20: loopback mode select for channel 2
When the chip is configured by hardware, this pin is used to select loopback operation modes for channel 2 (Inband Loopback
is not provided in hardware control mode).
00 = no loopback
01 = analog loopback
10 = digital loopback
11 = remote loopback
Table-1 Pin Description (Continued)
Name
Type
Pin No.
Description
SCLKE
SCLK
Low
Rising edge is the active edge.
High
Falling edge is the active edge.
相关PDF资料
PDF描述
IDT82V2044EPFG IC LIU T1/E1 QUAD SHORT 128-TQFP
IDT82V2048DAG IC LIU T1/E1 8CH SHORT 144-TQFP
IDT82V2048EDR IC LIU T1/E1 8CH SHORT 208-TQFP
IDT82V2048LBBG IC LIU T1/E1 8CH SHORT 160-BGA
IDT82V2048SDAG IC LIU T1/E1 8CH SHORT 144-TQFP
相关代理商/技术参数
参数描述
IDT82V2042EPFG8 功能描述:IC LIU T1/J1/E1 2CH SHORT 80TQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP(0.173",4.40mm 宽) 供应商设备封装:16-TSSOP 包装:带卷 (TR)
IDT82V2044 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:QUAD T1/E1 SHORT HAUL LINE INTERFACE UNIT
IDT82V2044BB 功能描述:IC LIU T1/E1 QUAD SHORT 160-BGA RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP(0.173",4.40mm 宽) 供应商设备封装:16-TSSOP 包装:带卷 (TR)
IDT82V2044BBG 功能描述:IC LIU T1/E1 QUAD SHORT 160-BGA RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP(0.173",4.40mm 宽) 供应商设备封装:16-TSSOP 包装:带卷 (TR)
IDT82V2044DA 功能描述:IC LIU T1/E1 QUAD SHORT 144-TQFP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP(0.173",4.40mm 宽) 供应商设备封装:16-TSSOP 包装:带卷 (TR)