参数资料
型号: IP-NCO
厂商: Altera
文件页数: 30/54页
文件大小: 0K
描述: IP NCO COMPILER
标准包装: 1
系列: *
类型: MegaCore
功能: 数控振荡器编译器
许可证: 初始许可证
3–8
Chapter 3: Parameter Settings
Parameter Descriptions
Parameter Descriptions
This section describes the NCO MegaCore function parameters, which can be set in
the user interface as described in “Setting Parameters” on page 3–1 .
Table 3–1 shows the parameters that can be set in the Parameters page.
1
The default values for each parameter are shown in bold font in the tables.
Table 3–1. NCO MegaCore Function Parameters Page
Parameter
Generation Algorithm
Value
Small ROM, Large ROM,
CORDIC, Multiplier-Based
Description
Select the required algorithm.
Phase Accumulator
Precision
4–64, Default = 32
Select the required phase accumulator precision.
(1)
Angular Resolution
4–24 or 32, Default = 16
Select the required angular resolution.
(2)
Magnitude Precision
10–32, Default = 18
Select the required magnitude precision.
Implement Phase Dithering On or Off
Turn on to implement phase dithering.
When phase dithering is enabled you can use the slider control to
Dither Level
Clock Rate
Desired Output Frequency
Phase Increment Value
Real Output Frequency
Min–Max
1–999 MHz, kHz, Hz, mHz,
Default = 100 MHz
1–999 MHz, kHz, Hz, mHz,
Default = 1 MHz
adjust the dither level between its minimum and maximum
values,
You can select the clock rate using units of MegaHertz, kiloHertz,
Hertz or milliHertz.
You can select the desired output frequency using units of
MegaHertz, kiloHertz, Hertz or milliHertz.
Displays the phase increment value calculated from the clock rate
and desired output frequency.
Displays the calculated value of the real output frequency.
Notes to Table 3–1 :
(1) The phase accumulator precision must be greater than or equal to the specified angular resolution.
(2) The maximum value is 24 for small and large ROM algorithms; 32 for CORDIC and multiplier-based algorithms.
Table 3–2 shows the parameters that can be set in the Implementation page.
Table 3–2. NCO MegaCore Function Implementation Page (Part 1 of 2)
Parameter
Frequency Modulation input
Modulator Resolution
Modulator Pipeline Level
Phase Modulation Input
Modulator Precision
Modulator Pipeline Level
Outputs
NCO MegaCore Function
User Guide
Value
On or Off
4–64, Default = 32
1, 2, Default = 1
On or Off
4–32, Default = 16
1, 2, Default = 1
Dual Output , Single
Output
Description
You can optionally enable the frequency modulation input.
Select the modulator resolution for the frequency modulation
input.
Select the modulator pipeline level for the frequency modulation
input.
You can optionally enable the phase modulation input.
Select the modulator precision for the phase modulation input.
Select the modulator pipeline level for the phase modulation input.
Select whether to use a dual or single output.
November 2013 Altera Corporation
相关PDF资料
PDF描述
IP-NIOS IP NIOS II MEGACORE
IP-PCI/MT64 IP PCI 64BIT MASTER/TARGET
IP-PCIE/8 IP PCI EXPRESS, X8
IP-POSPHY4 IP POS-PHY L4
IP-RIOPHY IP RAPID I/O
相关代理商/技术参数
参数描述
IP-NIOS 功能描述:开发软件 Nios II MegaCore RoHS:否 制造商:Atollic Inc. 产品:Compilers/Debuggers 用于:ARM7, ARM9, Cortex-A, Cortex-M, Cortex-R Processors
IPO-002-VSF-LF 制造商:PROXISTOR AB ELECTRONIC 功能描述:PROXIMITY SWITCH, PNP; Sensor Input:Inductive; Sensing Range Max:2mm; Supply Voltage DC Min:10V; Supply Voltage DC Max:30V; SVHC:No SVHC (19-Dec-2012); External Depth:10.5mm; External Length / Height:16.5mm; External Width:30mm;
IPOD TOUCH4-C-B 制造商:Distributed By MCM 功能描述:Apple® iPod Black Touch 4th Gen Digitizer + Glass 制造商:Distributed By MCM 功能描述:APPLE IPOD TOUCH DIGITIZER BLACK
IPOD TOUCH4-C-W 制造商:Distributed By MCM 功能描述:APPLE IPOD TOUCH DIGITIZER WHITE 制造商:Distributed By MCM 功能描述:Apple® iPod White Touch 4th Gen Digitizer + Glass
IPP015N04N G 功能描述:MOSFET OptiMOS 3 PWR TRANST 40V 120A RoHS:否 制造商:STMicroelectronics 晶体管极性:N-Channel 汲极/源极击穿电压:650 V 闸/源击穿电压:25 V 漏极连续电流:130 A 电阻汲极/源极 RDS(导通):0.014 Ohms 配置:Single 最大工作温度: 安装风格:Through Hole 封装 / 箱体:Max247 封装:Tube