收藏本站
参数资料
型号： M30102F3TFP
元件分类： 微控制器/微处理器
英文描述： 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP48
封装： 7 X 7 MM, 0.50 MM PITCH, PLASTIC, LQFP-48
文件页数： 152/166页
文件大小： 2060K
代理商： M30102F3TFP
Under
development
Tentative Specifications REV.E1
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30100/M30102 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Timer Z
83
Figure 1.14.24. Timer Z-related registers (4)
Timer Y, Z output control register
Symbol
Address
When reset
TYZOC
008A16
XXXXX0002
Bit name
Function
Bit symbol
W
R
b7
b6 b5
b4
b3
b2
b1 b0
TZOCNT
TYOCNT
TZOS
Nothing is assigned.
When write, set "0". When read, their contents are "0".
Timer Z one-shot
start bit
Timer Y programmable
waveform generation
output switching bit
0 : Outputs programmable waveform
1 : Outputs the value of P32 port register
0 : Outputs programmable waveform
1 : Outputs the value of P31 port register
0 : Stops one-shot
1 : Starts one-shot
Timer Z programmable
waveform generation
output switching bit
(Note 2)
Note 1: The timer Z one-shot start bit is automatically cleared to "0" when the output of
one-shot waveform is completed. The timer Z one-shot start bit should be set to "0" by
program when the one-shot waveform output is terminated by setting the count
start flag to "0" during the wave form output.
Note 2: The timer Y/Z programmable waveform generaton output switching bit is valid only
when operating in programmable waveform generation mode.
(Note 1)
External input enable register
Bit name
Function
Bit symbol
W
R
Symbol
Address
When reset
INTEN
009616
0016
INT0EN
b7
b6
b5
b4
b3
b2
b1
b0
INT0 input enable bit
0 : Disabled
1 : Enabled
0 : One edge
1 : Two edges
0 : Disabled
1 : Enabled
0 : One edge
1 : Two edges
0 : Disabled
1 : Enabled
INT0 input polarity select bit
INT1 input enable bit
INT1 input polarity select bit
INT2 input enable bit
INT2 input polarity select bit
0 : One edge
1 : Two edges
INT0PL
INT1EN
INT1PL
INT2EN
INT2PL
INT3 input enable bit
0 : Disabled
1 : Enabled
INT3EN
INT3 input polarity select bit
0 : One edge
1 : Two edges
INT3PL
INT0 input filter select register
Bit name
Function
Bit symbol
W
R
Symbol
Address
When reset
INT0F
001E16
XXXXX0002
INT0F0
b7
b6
b5
b4
b3
b2
b1
b0
INT0 input filter select bit
0 0 : No filter
0 1 : Filter with f1 sampling
1 0 : Filter with f8 sampling
1 1 : Filter with f32 sampling
0 : Disabled
1 : Enabled
UART0 receive hardware
interrupt enable bit (Note)
INT0F1
INT0F2
b1 b0
Note: Interrupts used for debugging purposes only.
––
(Note)
Note : This bit must be set in condition of INT0 pin one-shot trigger invalid (INOSTG="0").
Nothing is assigned.
In an attempt to write to these bits, write “0”. The value, if read,
turns out to be indeterminate.
相关PDF资料
PDF描述
M37481M8-XXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP44
M37481M8T-XXXSP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PDIP42
MB96F356ASAPMC-GE2 16-BIT, FLASH, 56 MHz, MICROCONTROLLER, PQFP64
MB96F356RWAPMC1-GSE2 16-BIT, FLASH, 56 MHz, MICROCONTROLLER, PQFP64
MB95F204KP-G-SH-SNE2 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PDIP24
相关代理商/技术参数
参数描述
M30102T-PTC 制造商:Renesas Electronics Corporation 功能描述:DEV 48PIN .5MM QFP CNVTR FOR M30100T-PRB - Bulk
M30-1050046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30, RL RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M30-1060046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30,LSE RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M3010A 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS
M3010A25 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*