收藏本站
参数资料
型号： M30102F3TFP
元件分类： 微控制器/微处理器
英文描述： 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP48
封装： 7 X 7 MM, 0.50 MM PITCH, PLASTIC, LQFP-48
文件页数： 95/166页
文件大小： 2060K
代理商： M30102F3TFP
Oscillation Stop Detection
Under
development
Tentative Specifications REV.E1
Specifications in this manual are tentative and subject to change.
Mitsubishi microcomputers
M30100/M30102 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
31
b7
b6
b5
b4
b3
b2
b1
b0
RW
CM20
CM21
CM22
CM23
0
00
0
Oscillation stop detection register (Note 5)
Symbol
Address
When reset
CM2
000C16
0416
Bit name
Function
Bit symbol
Main clock switch bit
Oscillation stop detection
interrupt enable bit
0: The function is invalid.
1: The function is valid.
0: Select XIN clock.
1: Select ring oscillator.
0: Disabled
1: Enabled
0: XIN oscillating normally
1: XIN stopping abnormally
Oscillation stop
detection bit
Clock monitor bit
Reserved bit
Always set to "0"
Note 1: Set to “0” before stopping the oscillation of the main clock (XIN-XOUT).
(stop mode, low power dissipation mode, ring oscillation mode)
An oscillation stop is detected if the oscillation of the main clock (XIN-XOUT) is
stopped when the following two conditions are satisfied: (1) the oscillation stop
detection function is valid and (2) CM21=1.
Note 2: Valid when CM20=1.
Note 3: CM22 bit switches to “1“ automatically if an oscillation stop is detected when
both CM20 bit and CM 21 bit are “1”. CM22 bit cannot be cleared when CM23=1.
Note 4: This bit is valid when CM20 bit is “1”. Use this bit for the purpose of confirming
XIN operation for oscillation stop detection interrupt execution.
Note 5: In case of writing to this register, set bit 0 of the protect register(000A16) to "1".
(Note 3)
(Note 2)
(Note 1)
(Note 4)
fMAIN
CM22
CM21
Oscillation stop
detection interrupt
generating circuit
Charge/discharge
circuit
Ring oscillator
To the CPU
Watchdog
timer
interrupt
Main clock
Main clock switch control
To the main clock
division circuit
Compulsory discharge when CM20=0
Pulse generation
circuit for clock
edge detection
and charge/
discharge control
#:When XIN is supplied, this repeats charge and discharge with pulses by XIN edge detection.
When XIN is not supplied, this continues charging. When the charge exceeds a certain level,
it regards the oscillation as stopped.
CM14
(Note)
Note: As for the fMAIN, refer to Figure 1.8.3 clock generating circuit.
Figure 1.10.1. Oscillation stop detection circuit
Figure 1.10.2. Oscillation stop detection register
相关PDF资料
PDF描述
M37481M8-XXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP44
M37481M8T-XXXSP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PDIP42
MB96F356ASAPMC-GE2 16-BIT, FLASH, 56 MHz, MICROCONTROLLER, PQFP64
MB96F356RWAPMC1-GSE2 16-BIT, FLASH, 56 MHz, MICROCONTROLLER, PQFP64
MB95F204KP-G-SH-SNE2 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PDIP24
相关代理商/技术参数
参数描述
M30102T-PTC 制造商:Renesas Electronics Corporation 功能描述:DEV 48PIN .5MM QFP CNVTR FOR M30100T-PRB - Bulk
M30-1050046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30, RL RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M30-1060046 功能描述:集管和线壳 FML CRIMP CONTACT 1.25MM,AWG 26-30,LSE RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector
M3010A 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS
M3010A25 制造商:Honeywell Sensing and Control 功能描述:GENERAL MARKET VRS
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*